Abstract:The effect of diluents on polymer crystallization and membrane morphology via thermally induced phase separation(TIPS) were studied by changing the composition of the mixed-diluents systematically, in the system of poly(4-methyl-1-pentene) (TPX)/dibutyl-phthalate (DBP)/di-n-octyl-phthalate (D-n-OP) with TPX concentration of 30 wt %. The TPX crystallization was observed with differential scanning calorimetry (DSC) and wide angle Xray diffraction (WAXD). The membranes were characterized with scanning electron microscopy (SEM), porosity, and pore size measurement. As the content of D-n-OP increased in n-mixed-diluents, the solubility with TPX increased, inducing the phase separation changing from liquid-liquid phase separation into solid-liquid phase separation, which changed the membrane morphology and structure. When the ratios of DBP to D-n-OP were 10 : 0, 7: 3; 5 : 5, and 3: 7, membranes were formed with cellular structure and well connected pores, while the ratio was 0 : 10, discernable spherulities were found with not well-formed pore structure. The effect of composition of the mixed-diluents on membrane morphology was more remarkable in TPX/dioctyl-sebacate (DOS)/dimethyl-phthalate (DMP) system, since good cellular structure was formed when the ratios of DOS to DMP were 10 : 0, 7 : 3, while spherulites were observed when 5: 5. Dual endotherm peaks behavior on DSC melting curves emerged for all the samples in this study, which was attributed to the special polymer crystallization behavior, primary crystallization, and secondary crystallization occurred when quenching the samples. As the content of D-n-OP increased, the secondary crystallization enhanced which induced the first endotherm peak on DSC melting curves moving to a lower temperature and the broadening of the overall melting peak, as well as the increasing of the overall crystallinity. (c) 2008 Wiley Periodicals, Inc.

Dissipative Particle Dynamics Study and Experimental Verification on the Pore Morphologies and Diffusivity of the Poly (4-Methyl-1-pentene)-diluent System Via Thermally Induced Phase Separation: the Effect of Diluent and Polymer Concentration

Computer simulation and experimental verification of morphology and gas permeability of poly(4-methyl-1-pentene) membranes: effects of polymer chain and diluent extractant

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Preparation of Porous PVDF Membrane Via Thermally Induced Phase Separation with Diluent Mixture of DBP and DEHP

Investigation on the membrane formation process of polymer–diluent system via thermally induced phase separation accompanied with mass transfer across the interface: Dissipative particle dynamics simulation and its experimental verification

Three-dimensional analysis of membrane formation via thermally induced phase separation by dissipative particle dynamics simulation

Dissipative Particle Dynamics Simulation on the Membrane Formation of Polymer–solvent System Via Nonsolvent Induced Phase Separation

Novel multiscale simulations on the membrane formation via hybrid induced phase separation process based on dissipative particle dynamics

Solid-liquid phase separation of poly-4-methyl-1 pentene/diluent system via thermally induced phase separation

Effect of Diluent on Pore Size and Connectivity of Ipp Hollow Fiber Microporous Membranes Via Thermally Induced Phase Separation

Multiscale Simulation on the Membrane Formation Process Via Thermally Induced Phase Separation Accompanied with Heat Transfer

Thermally Induced Phase Separation of Poly(vinylidene Fluoride)/diluent Systems: Optical Microscope and Infrared Spectroscopy Studies

Effect of Diluent on the Morphology and Performance of IPP Hollow Fiber Microporous Membrane via Thermally Induced Phase Separation1

Effect of diluents on the crystallization behavior of poly(4-methyl-1-pentene) and membrane morphology via thermally induced phase separation

Preparation and Characterization of PVDF Flat Sheet Microporous Membrane via Thermally Induced Phase Separation

Effects of diluent content on the crystallization behavior and morphology of polyethylene membrane fabricated via thermally induced phase separation process

Membrane formation of poly(vinylidene fluoride)/poly(methyl methacrylate)/diluents via thermally induced phase separation

Effects of Co-Diluent on the Pore Structure, Patterning Fidelity, and Properties of Membranes Fabricated by Lithographically Templated Thermally Induced Phase Separation

Preparation and Characterization of Microporous PVDF Membrane by Thermally Induced Phase Separation from a Ternary Polymer/solvent/non-Solvent System

Preparation of Polyethylene Microporous Membranes with High Water Permeability from Thermally Induced Multiple Phase Transitions

Computer Simulations on Double Hydrophobic PS-b-PMMA Porous Membrane by Non-Solvent Induced Phase Separation