Abstract:The low-frequency fluctuation over the capacitor voltages seriously limits the development of medium-voltage variable-speed drives with a modular multilevel converter (MMC). Therefore, this paper presents an effective strategy of the low-speed and start-up operation for an MMC-based motor drive. The proposed strategy properly coordinates the improved injection and the reduced average capacitor voltage with high applicability. The specific interactions between the control parameters and the system metrics are analyzed to give the detailed steps of the parameters designing. Hence, based on the derivations, the proposed method enables the low-frequency operation under the nominal load torque with decreased injected components and reduced peak capacitor voltages. What is more, two start-up strategies that, respectively, aim at different objectives for the coordinated strategy are proposed, indicating satisfying control performances for the practical applications. The injected common-mode voltage and circulating current in the proposed method are designed to have a great reduction. Thus, the unfavorable risks for the motor are evidently decreased for better stability. The reduced peak current also lessens the high stress on switching devices with desirable reliability. The simulation and experiment results of an MMC-based motor drive prototype prove the effectiveness and superiority of the proposed method.

A Control Strategy for Star-Channel Modular Multilevel Converter in Variable-Speed Motor Drive Application.

Delta-Channel Modular Multilevel Converter for a Variable-Speed Motor Drive Application

A Flexible Reduced Capacitor Voltages Strategy for Variable-Speed Drives with Modular Multilevel Converter

A Coordinated Strategy of Low-Speed and Start-Up Operation for Medium-Voltage Variable-Speed Drives with a Modular Multilevel Converter

A New Control Strategy for Modular Multilevel Converter Operating in Quasi Two-Level PWM Mode

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction

Control of the hybrid modular multilevel converter in motor drive applications

Implementation of Space Vector Modulation (SVM) for Modular Multilevel Converter Based on Submodule Regroup

Finite-Level-State Model Predictive Control for Sensorless Three-Phase Four-Arm Modular Multilevel Converter

A Hybrid Modular Multilevel Converter for Medium-Voltage Variable-Speed Motor Drives

An Active Cross-Connected Modular Multilevel Converter (AC-MMC) for a Medium-Voltage Motor Drive

A Control System for Large-Scale Modular Multilevel Converters.

A Star-Channel Modular Multilevel Converter for Zero/Low-Fundamental-Frequency Operation Without Injecting Common-Mode Voltage

A Modified Modular Multilevel Converter for Motor Drives Capable of High-Torque Operation at Zero/Low Motor Speeds

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

Introduction, Modeling and Simulation of Modular Multilevel Converter

An Improved Circulating Current Injection Method for Modular Multilevel Converters in Variable-Speed Drives

Startup Scheme And Modulation Strategy For A New Modular Multilevel Converter

An improved high-frequency common-mode voltage injection method in modular multilevel converter in motor drive application

A Flying-Capacitor Modular Multilevel Converter for Medium-Voltage Motor Drive

Control and modulation strategies for modular multilevel converter based HVDC system