Abstract:Ni-based coating, as an excellent anti-corrosion material, is widely used in the petroleum field and has become a research hotspot in recent years. With the continuous progress of the petrochemical industry, especially in the carbon capture, utilization, and storage and enhanced oil recovery (CCUS-EOR) systems, Ni-based coatings face significant challenges. Based on the latest research status, this paper describes the influence factors of Ni-based coatings and the applicability of different Ni-based coatings. Research shows that CO2 and H2S are the key factors affecting corrosion. With the increase in CO2 and H2S content in the environment, the corrosion rate of carbon steel will be accelerated. When the CO2 content reaches a certain critical value, further increasing the CO2 content will reduce the corrosion rate. The corrosion mechanism of carbon steel under the combined action of CO2 and H2S was also analyzed. At a high CO2/H2S partial pressure ratio, the corrosion process is dominated by CO2 corrosion, and with the increase in the H2S/CO2 partial pressure ratio, the corrosion process shifts to H2S corrosion control. The application of Ni-P protective coatings in this corrosive environment has been investigated. A surface Ni-P coating is extremely hard, wear-resistant, and corrosion-resistant. It can withstand the corrosion of CO2, high salinity, and other media while preventing electrolyte penetration. It exhibits strong corrosion resistance in NaCl solution and can help prevent scaling. However, in the presence of CO2-H2s, it has been discovered that due to inherent faults in Ni-P, the corrosion phenomenon may be exacerbated by the action of H2S, and its protection ability has to be further investigated. The mechanical properties and corrosion resistance of the coating can be enhanced by adding particles to the coating, and four new coating systems, Ni-Fe-P, Ni-Cu-P, Ni-W-P, and Ni-W-P-nSiO2, were introduced. Finally, the future development focus and prospect of CO2 corrosion protection coatings under harsh conditions are prospected.

Enhanced anti-microbial corrosion of nano-CuO-loaded Ni coatings on pipeline steels in simulation environment of natural gas transportation pipeline

Effect of Nano-sized Cu-Rich Phase on Microbiological Corrosion Behavior of Cu and Ni-Added Steel for Oil Country Tubular Goods

Microbial corrosion behavior of pipeline steels in simulation environment of natural gas transportation pipeline

Influence of copper distribution in thermally sprayed Cu-bearing coatings on corrosion and microbial activity

Influence of cu distribution in thermally sprayed cu-bearing coatings on the prevention of Desulfovibrio vulgaris corrosion

Effect of Cu Addition in Pipeline Steels on Microstructure,Mechanical Properties and Microbiologically Influenced Corrosion

Microbiologically influenced corrosion of a novel pipeline steel containing Cu and Cr elements in the presence of Desulfovibrio vulgaris Hildenborough

Designing Cu chemical distribution in Ti(AlCu)N coatings for enhanced erosion-corrosion and antibacterial performance

Enhancement resistance to microbiologically influenced stress corrosion of Cu-bearing steel against Bacillus cereus

Alteration of intracellular protein expressions as a key mechanism of the deterioration of bacterial denitrification caused by copper oxide nanoparticles

Effect of nutrient concentration on corrosion mechanism of X80 pipeline steel caused by sulfate-reducing bacteria

Progress in Research on Ni-Based Protective Coatings for Downhole Tubing Steel in CO2 Flooding

Insight into the corrosion susceptibility and failure mechanism of Cu-Ni alloy pipeline welded joints in simulated marine environment

A novel nickel-copper alternating-deposition coating with excellent tribological and antibacterial property

Time-dependent corrosion behavior of electroless Ni–P coating in H2S/Cl− environment

Preparation and characterization of Ni–SiO2 composite coating on pipeline inner surface

Investigating the effects of environment, corrosion degree, and distribution of corrosive microbial communities on service-life of refined oil pipelines

A study on the microbial biocorrosion behavior of API 5 L X65 carbon steel exposed to seawater

Study on the properties of Ni-W-CrN thin films on X80 pipeline steel: Effect of current density and deposition time

Ni-W composite coating reinforced with CrN nanoparticles on X80 pipeline steel: Preparation and characterization

Bionic eco-friendly synergic anti-scaling Cu-Zn-CeO 2 coating on steel substrate functionalized by multi-scale structures and heating enhanced adsorption