Abstract:Economic cost of raw materials has become an important limiting factor for the further application of super-hydrophobic surface. Magnesium hydroxide is an innocuous, antibacterial, eco-friendly, and especially cheap material. Superhydrophobic surface fabricated with magnesium hydroxide was safe, environment friendly, and of very low cost. However, magnesium hydroxide superhydrophobic surfaces prepared through traditional electrodeposition method was always fragile and easy to peel off substrate, due to the discontinuous platelet-like structure which led to weak mechanical property. In this work, we electrodeposited a robust network-like magnesium hydroxide layer on iron substrate under the structure direction of xanthan gum which formed network with helical conformation at low temperature and proper pH value in aqueous solution. Electrodeposition factors such as concentrations of xanthan gum and glucose, bath temperature, pH value of electrolyte and current intensity were studied. The magnesium hydroxide layer fabricated at the optimum condition (0.5 mol/L magnesium nitrate, 4 mg/L XG, 4 mg/L glucose, 2.6 pH value and 35 mA at 15 degrees C for 20 min) was with network-like structure, and exhibited excellent superhydrophobicity (water contact angle, 153.56 degrees sliding angle, 2.2 degrees) and self-cleaning property after stearic acid modification. The robust layer kept superhydrophobic until 600 mm abrasion length facing 1000 grit SiC sandpaper under 100 g weight, and with detachment less than 5% after cross hatch tape adhesion test. The layer also demonstrated good long-term immersion stability, and was still super-hydrophobic with 48 h immersion in 3.5 wt% NaCl aqueous solution at room temperature. The inhibition ef-ficiency of the layer reached 99.03%, due to its extremely high corrosion resistance (R-ct = 2.87 x 10(5) Omega/cm(2), R-f = 2.53 x 10(6) Omega/cm(2)). The introduced method of electrodepositing robust network-like MH layer made the further application of low-cost superhydrophobic surface with magnesium hydroxide possible.

Environmentally Benign Two-Step Synthesis and Characterization of 2D Mg(OH)(2) Nanoflake Thin Films

Preparation and characterization of lamellar-like Mg(OH)2 nanostructures via natural oxidation of Mg metal in formamide/water mixture

Mg(OH)2 nanoparticles produced at room temperature by an innovative, facile, and scalable synthesis route

A new environmentally-friendly route to in situ form a high-corrosion-resistant nesquehonite film on pure magnesium

Investigation of Crystallization Growth Characteristics of Mg(OH)2 Crystals under Unconstrained Conditions

Nanoscale magnesium hydroxide and magnesium oxide powders: Control over size, shape, and structure via hydrothermal synthesis

Morphology-tunable Synthesis and Characterizations of Mg(OH)2 Films Via a Cathodic Electrochemical Process

Highly Textural Lamellar Mesostructured Magnesium Hydroxide Via A Cathodic Electrodeposition Process

MgO nanostructures synthesized by thermal evaporation

Synthesis and characterization of MgSO4·5Mg(OH)2·2H2O flake powders

Formation of rod-like Mg(OH)2 nanocrystallites under hydrothermal conditions and the conversion to MgO nanorods by thermal dehydration

Synthesis and Characterization of MgO Thin Films Obtained by Spray Technique for Optoelectronic Applications

Mg(OH)2 Complex Nanostructures with Superhydrophobicity and Flame Retardant Effects

Ultrasonic-assisted Synthesis of Hydrophobic Magnesium Hydroxide Nanoparticles

Nanoflake-Modified Mgo Microspheres Prepared by Flame Spraying

Structural Characteristics and Flame-Retardant Properties of Nanosized Magnesium Hydroxide

Robust Network-Like Superhydrophobic Magnesium Hydroxide Surface Via Cathodic Electrodeposition with Xanthan Gum

Direct Observation of the Growth Process of MgO Nanoflowers by a Simple Chemical Route.

Green, Noncorrosive, Easy Scale-Up Hydrothermal–Thermal Conversion: A Feasible Solution to Mass Production of Magnesium Borate Nanowhiskers

Preparation of Highly Dispersed Mg(OH)2 Nano-plates Via DoubleInjection-hydrothermal Method

Dispersion and Size Control of Layered Double Hydroxide Nanoparticles in Aqueous Solutions