Abstract:Laser powder bed fusion (PBF-LB) is a promising metal additive manufacturing technology. However, ensuring consistent quality remains a pressing challenge due to defects that arise during the PBF-LB process. These defects significantly impede subsequent molding procedures, emphasizing the urgent need for real-time monitoring technology to steer part production effectively. Present monitoring techniques are limited, typically addressing specific defect types or contour deformations individually and lacking a simple and effective method to achieve multi-scale defects detection for PBF-LB parts. This study aims to pioneer a method that can detect defects and part contour deformations during the PBF-LB process using only an industrial camera as the monitoring device. The proposed method consists of two key components: a semantic segmentation model based on deep transfer learning (SS-DTF model) and a contour deformation detection module. To begin with, an off-axis in-situ monitoring system is deployed with an industrial camera to capture powder bed images for each layer after laser scanning and powder spreading. This enables the production of datasets for post-scanning and post-spreading anomalies. The SS-DTF model is trained on the above two datasets respectively to achieve segmentation for multi-category defects. The contour deformation detection module provides automatic early warning by comparing the true contour of the part with the nominal contour layer-by-layer, using statistical process monitoring method. The proposed method is then used to monitor parts with various geometries under real processing conditions, aiming to clarify the potential correlation between monitoring outcomes and the parts' multi-scale defects in PBF-LB. The results show that the proposed method provides a promising solution for in-situ monitoring of the PBF-LB process.

In-situ monitoring of laser-based PBF via off-axis vision and image processing approaches

In-situ visual monitoring for multi-scale defects detection in laser powder bed fusion

Data-fusion for in-situ monitoring and molten state identification during LPBF of NiCoCr medium-entropy alloy

Investigation into the optical emission of features for powder-bed fusion AM process monitoring

Multiple Sensor Detection of Process Phenomena in Laser Powder Bed Fusion

Process Monitoring Using Synchronized Path Infrared Thermography in PBF-LB/M

In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction

Multi-sensor monitoring of powder melting states via melt pool optical emission signals during laser-based powder bed fusion

Powder-Bed Fusion Process Monitoring by Machine Vision With Hybrid Convolutional Neural Networks

Spatter feature-based in-situ identification of disturbances in process parameters during laser powder bed fusion

Inference of highly time-resolved melt pool visual characteristics and spatially-dependent lack-of-fusion defects in laser powder bed fusion using acoustic and thermal emission data

High-Fidelity Optical Monitoring of Laser Powder Bed Fusion via Aperture Division Multiplexing

Thermal Based Process Monitoring for Laser Powder Bed Fusion (LPBF)

Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process

Spattering mechanism of laser powder bed fusion additive manufacturing on heterogeneous surfaces

Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction

Spatter detection and tracking in high-speed video observations of laser powder bed fusion

Online in-situ monitoring of melt pool characteristic based on a single high-speed camera in laser powder bed fusion process

Research on an Online Monitoring Device for the Powder Laying Process of Laser Powder Bed Fusion

Machine‐Learning‐Based Monitoring of Laser Powder Bed Fusion