Abstract:It has been proved that dual-armature permanent magnet (PM) machines have higher power density than conventional PM machines under the same copper loss. However, the thermal conditions of these machines are different. This paper makes a fair comparison between a dual-armature linear switched flux PM machine (DALSFPMM) and a linear surface-mounted PM machine (LSPMM) by considering both electromagnetic performances and thermal conditions. First, the topologies of two machines and platform are introduced. Then, the 2D and 3D finite element (FE) models are employed for the electromagnetic and thermal analyses, respectively. During the machine optimization, the thermal analysis is used to determine the copper loss under the fixed machine dimensions, while the electromagnetic analysis is used to optimize the machine dimensions under the fixed copper loss. After iterations, two machines are optimized and their performances are compared. Under the limitations of 80 degrees C maximum PM temperature and 120 degrees C maximum winding temperature, the DALSFPMM can exhibit 38% higher thrust force density for the continuous duty and up to 43% higher thrust force density for the short-time duty. Finally, a prototype machine of DALSFPMM is tested to validate the analyses.

Comparative Study of Permanent Magnet Machines with Single-Sided and Dual-Sided Magnets

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Electromagnetic Performance Comparison of Doubly Salient PM Machines with Different Stator Iron Core Segments

Design and Electromagnetic Performance Analysis of Novel Dual-Armature Π-Core Doubly Salient Permanent Magnet Machines

Comparison Between Dual-Armature Linear Switched Flux Permanent Magnet Machine and Linear Surface-Mounted Permanent Magnet Machine Considering Thermal Conditions

Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes

Investigation of a Novel Hybrid Less-Rare-Earth Consequent-Pole Interior Permanent Magnet Machine with Asymmetric Rotor

Comparison of Optimal Design and Performance of PM Machines Having Non-Overlapping Windings and Different Rotor Topologies

Comparison of Dual 3-Phase Modular Permanent Magnet Machines with Overlapping/Non-overlapping Windings and Redundancy

Design Optimization and Performance Investigation of Linear Doubly Salient Slot Permanent Magnet Machines

Comparative Study Between Doubly Salient PM Machine with New Stator/Rotor-Pole Number Combination and Biased Flux PM Machine

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Comparative Study of Biased Flux PM Machines Having Different Stator Core Segments and Armature Winding Configurations

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

Comparisons of Permanent-Magnet Machines with Different Rotor Topologies for Quadruped Robot

A Novel Structure of Doubly Salient Permanent Magnet Machine

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

Comparative Analysis of Double Flux Modulation Permanent Magnet Machines With Different Stator PM Arrangements

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

A Dual-Permanent-Magnet Machine with Asymmetric Stator Teeth-Tips