Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

Facile Synthesis of Recycling Fe3O4/graphene Adsorbents with Potassium Humate for Cr(VI) Removal

Graphene Oxide Decorated Nanoscale Iron Sulfide for Highly Efficient Scavenging of Hexavalent Chromium from Aqueous Solutions

Constructing Carbon-Coated Fe3O4 Hierarchical Microstructures with a Porous Structure and Their Excellent Cr(VI) Ion Removal Properties

Graphene/Fe 3 O 4 @polypyrrole nanocomposites as a synergistic adsorbent for Cr(VI) ion removal

Preparation of Graphene/Fe3O4/Polypyrrole Nanocomposite and its Adsorption for Cr(VI) Ions

Preparation of Graphene/Fe<sub>3</sub>O<sub>4</sub>/Polypyrrole Nanocomposite and its Adsorption for Cr(VI) Ions

Chitosan Induced Synthesis of Few-Layer MoS2/Fe-doped Biochar and Its Dual Applications in Cr(VI) Removal

The Preparation of a Lignosulfonate/Chitosan–Graphene Oxide Hydrogel Biosorbent to Effectively Remove Cr(VI) from Wastewater: Adsorption Performance and Mechanisms

Magnetic graphene-based nanocomposites as highly efficient absorbents for Cr(VI) removal from wastewater

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Synthesis of a Multifunctional Graphene Oxide-Based Magnetic Nanocomposite for Efficient Removal of Cr(VI).

One-step Synthesis of Fe2O3 Nano-Rod Modified Reduced Graphene Oxide Composites for Effective Cr(vi) Removal: Removal Capability and Mechanism

One-Pot Synthesis of Lamellar Fe-Cu Bimetal-Decorated Reduced Graphene Oxide and Its Enhanced Removal of Cr(VI) from Water

A novel ternary magnetic Fe3O4/g-C3N4/Carbon layer composite for efficient removal of Cr (VI): A combined approach using both batch experiments and theoretical calculation

Removal performance and mechanism of nano α-Fe2O3/graphene oxide on aqueous Cr(VI)

Synthesis of novel lignosulfonate-modified graphene hydrogel for ultrahigh adsorption capacity of Cr(VI) from wastewater

Efficient Removal of Cr(VI) Ions in Petrochemical Wastewater Using Fe3O4@Saccharomyces cerevisiae Magnetic Nanocomposite

High nitrogen content bimolecular co-functionalized graphene nanoflakes for hypertoxic Cr(VI) removal: Insights into adsorption behavior and mechanisms

Synthesis of novel magnetic activated carbon for effective Cr(VI) removal via synergistic adsorption and chemical reduction

Cyclodextrin functionalized 3D-graphene for the removal of Cr(VI) with the easy and rapid separation strategy

Green sustainable and highly efficient hematite nanoparticles modified biochar-clay granular composite for Cr(VI) removal and related mechanism