Abstract:Ultrasound-induced cavitation in blood vessels is a common scenario in medical procedures. This paper focuses on understanding the mechanism of microscopic damage to vessel walls caused by the evolution of cavitation bubbles within the vessels. In this study, cavitation bubbles were generated using the low-voltage discharge method in 0.9% sodium chloride saline, and vessel models with wall thicknesses ranging from 0.7 mm to 2 mm were made using a 3D laminating process. The interaction between cavitation bubbles and vessel models with different wall thicknesses was observed using a combination of high-speed photography. Results show that cavitation bubble morphology and collapse time increased and then stabilized as the vessel wall thickness increased. When the cavitation bubble was located in vessel axial line, pair of opposing micro-jets were formed along the axis of the vessel, and the peak of micro-jet velocity decreased with increasing wall thickness. However, when the cavitation bubble deviated from the vessel model center, no micro-jet towards the vessel model wall was observed. Further analysis of the vessel wall deformation under varying distances from the cavitation bubble to the vessel wall revealed that the magnitude of vessel wall stretch due to the cavitation bubble expansion was greater than that of the contraction. A comparative analysis of the interaction of between the cavitation bubble and different forms of elastic membranes showed that the oscillation period of the cavitation bubble under the influence of elastic vessel model was lower than the elastic membrane. Furthermore, the degree of deformation of elastic vessel models under the expansion of the cavitation bubble was smaller than that of elastic membranes, whereas the degree of deformation of elastic vessel models in the contraction phase of the cavitation bubble was larger than that of elastic membranes. These new findings provide important theoretical insights into the microscopic mechanisms of blood vessel potential damage caused by ultrasound-induced cavitation bubble, as well as cavitation in pipelines in hydrodynamic systems.

GW29-e0867 Demonstration of Cavitation in the Coronary Arteries by Computational Fluid Dynamic

Numerical Simulation of Cavitating Flow in Water Hydraulic Axial Piston Pump

Three-Dimensional Numerical Simulation of Air Exhausted from Submerged Nozzles

Numerical Investigation of Cavitation Flow Inside Spool Valve with Large Pressure Drop

A Parametric Study of Hydrodynamic Cavitation Inside Globe Valves

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

The Hydraulic Cavitation Affected by Nanoparticles in Nanofluids

Numerical Simulation To The Effect Of Air In Dam-Break Problem

Application of Central-Weighted Essentially Non-Oscillatory Finite-Volume Interface-Capturing Schemes for Modeling Cavitation Induced by an Underwater Explosion

Numerical Investigation of Cavitating Flow Behind the Cone of a Poppet Valve in Water Hydraulic System

Cavitation Suppression of Bileaflet Mechanical Heart Valves

Two-Dimensional Simulation of the Collapse of Vapor Bubbles Near a Wall

Experimental investigation on the characteristics of the shock wave emitted by the cavitation bubble near the air bubble

Dissolved air effects on three-phase hydrodynamic cavitation in large scale Venturi- Experimental/numerical analysis

Experimental study on damage mechanism of blood vessel by cavitation bubbles

Large cavitation bubbles in the tube with a conical-frustum shaped closed end during a transient process

Numerical Simulation Of 3d Cavitating Turbulent Flow In Francis Turbine

Numerical investigation of three-dimensional effects of cavitating flow in a venturi-type hydrodynamic cavitation reactor

Bubble visualization in a simulated hydraulic jump

Experimental Transient Cavitation Bubbles in a Conical-Frustum Shaped Tube