Photoinduced Multi-Directional Deformation of Azobenzene Molecular Crystals

Yunhui Hao,Shuai Huang,Yanmei Guo,Lina Zhou,Hongxun Hao,Christopher J. Barrett,Haifeng Yu

DOI: https://doi.org/10.1039/c8tc04631j

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:Photoinduced multi-directional deformation of azobenzene molecular crystals enabled by photoisomerization and photothermal effects.

What problem does this paper attempt to address?

Molecular Dynamics Simulations on Photoinduced Switchable Tg and Self-Healing Behaviors of Azobenzene-Containing Polymers

Yongqin Zhang,Hua Yang,Yaguang Sun,Xiangrui Zheng,Yafang Guo

DOI: https://doi.org/10.1016/j.commatsci.2022.111810

IF: 3.572

2022-01-01

Computational Materials Science

Abstract:Developing polymers with switchable glass transition temperature (Tg) can solve scientific challenges such as fracture healing of polymers with high Tg and processing of hard polymers without plasticizer at room temperature. The azobenzene-containing polymers, or the so-called azopolymers, are smart materials that show photoswitchable Tg and photoinduced motions, which can be used in fabrication of photoactuators. Here, healable and reprocessable models were constructed by using linear azopolymers. Molecular dynamics (MD) simulation was used to study the behaviors of photo-induced bending, self-healing, and directional photofluidization of the azopolymers. A temporary modification of the C–N=N–C dihedral potential was applied to achieve the isomerization of azopolymer by using polymer consistent force-field (PCFF). The simulation results show that isomerization of azobenzene groups can lead to photoswitchable Tg of the azopolymers, which resulting in shape changes and different mechanical responses. Furthermore, the photoswitchable Tg makes the azopolymers much easier to heal under UV irradiation, and restore the mechanical properties under visible light irradiation. Finally, the mechanism of photoliquefaction was investigated, our results imply that the photoinduced trans–cis-trans cycles can reduce the mechanical properties and Tg values of azopolymers.
Photoinduced Deformation of Amorphous Polyimide Enabled by an Improved Azobenzene Isomerization Efficiency

Xuejie Sun,Jia Wei,Yanlei Yu

DOI: https://doi.org/10.1039/d2py00691j

IF: 4.6

2022-01-01

Polymer Chemistry

Abstract:A newly designed azo-PI, without pre-stretching or polarized-light irradiation, exhibits reversible bending behaviors under alternate UV and visible light irradiation, providing a facile route to deformable 2D/3D structure actuators.
Photoinduced deformation behavior of poly(aryl ether)s with different azobenzene groups in the side chain

Jie Yi,Yajing Yang,Xi-ming Song,Yuxuan Zhang

DOI: https://doi.org/10.1039/d3ra08664j

IF: 4.036

2024-01-01

RSC Advances

Abstract:Two novel azobenzene-functionalised poly(aryl ether)s were synthesized, and their photoresponsive properties studied. The photoinduced motion of the polymers was faster. Poly(aryl ether)s containing azobenzene groups in the side chain showed highly stable photoinduced deformation.

chemistry, multidisciplinary
Azobenzene crystal polymorphism enables tunable photoinduced deformations, mechanical behaviors and photoluminescence properties

Yunhui Hao,Lei Gao,Xiunan Zhang,Rongli Wei,Ting Wang,Na Wang,Xin Huang,Haifeng Yu,Hongxun Hao

DOI: https://doi.org/10.1039/d1tc01143j

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Tuning polymorphism in azobenzene molecular crystals enables them to exhibit a remarkable difference in photomechanical deformations, mechanical behaviors and luminescence properties.

materials science, multidisciplinary,physics, applied
Fast Photoinduced Large Deformation of Colloidal Spheres from a Novel 4-arm Azobenzene Compound

Jilei Wang,Shihang Wang,Yuqi Zhou,Xiaogong Wang,Yaning He

DOI: https://doi.org/10.1021/acsami.5b05651

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:A novel 4-arm shaped amphiphilic azobenzene compound was synthesized. The tetraphenylethylene (TPE) core precursor was prepared and further modified by azo coupling reaction at the four peripheral groups. Colloidal spheres could be directly prepared by self-assembly of the prepared amphiphilic azobenzene compound in selective solvents (THF/H2O), which were characterized by using transmission electron microscopy. The colloid diameters could be controlled by adjusting the initial compound concentration and water-adding rate in the preparation processes. By irradiation with visible linearly polarized LED light (450 nm), fast photoinduced deformation of the colloidal spheres along the polarization direction was observed. A very large deformation degree (l/d u003e 4) could be easily obtained.
Photoinduced Bending Behavior of Cross-Linked Azobenzene Liquid-Crystalline Polymer Films with a Poly(oxyethylene) Backbone.

Jiu-an Lv,Weiru Wang,Jixiang Xu,Tomiki Ikeda,Yanlei Yu

DOI: https://doi.org/10.1002/marc.201400112

IF: 5.006

2014-01-01

Macromolecular Rapid Communications

Abstract:Cross-linked azobenzene liquid-crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation.
Photoinduced Deformation of Amorphous Polyimide Enabled by Improved Azobenzene Isomerization Efficiency

Xuejie Sun,Jia Wei,Yanlei Yu

DOI: https://doi.org/10.1039/d2py00691j

IF: 4.6

2022-06-26

Polymer Chemistry

Abstract:Photodeformable azobenzene-containing polyimides (azo-PIs) have attracted attention due to their photo-response, good mechanical property, and thermal stability. The deformation principle of azo-PIs mainly depends on the accumulation of conformational changes in one direction by polarized-light irradiation or pre-stretching. Herein, we synthesize a new deformable azo-PI and put forward a different strategy to achieve the photodeformation by improving azobenzene isomerization efficiency, which is attributed to the incorporation of azobenzene into the side chains of polyimide (s-azo-PI). The s-azo-PI film exhibits reversible bending behaviour under alternate ultraviolet and visible light irradiation without utilizing polarized light or pre-stretching. By means of this photodeformable behaviour, origami- or kirigami-inspired deformable 3D-structure objects, such as the cubic box and roller, are easily manufactured without any prior treatment, showing the potential to broaden applications of azopolymers in smart 3D actuators.

polymer science
Role of Alicyclic Conformation-Isomerization in the Photomechanical Performance of Azobenzene-Functionalized Cross-Linked Polyimides Containing Tetra-Substituted Cyclohexane Moieties

David H Wang,Kyung Min Lee,Deborah H Lee,Matthew Baczkowski,Hajin Park,Michael E McConney,Loon-Seng Tan

DOI: https://doi.org/10.1021/acsmacrolett.0c00903

2021-02-16

Abstract:The classical "chair-twist boat-boat" conformational dynamics (CD) of cyclohexane is thermally activated. Here we report on the photoinduced/azobenzene-assisted CD of bilaterally fused cyclohexane moieties contributing to large photomechanical response of cross-linked azobenzene-functionalized polyimides (X-azoPI), based on 1,2,4,5-cyclohexane-tetracarboxylic-dianhydride (CHDA), exhibiting a photobending angle and photogenerated stress, up to ∼90° and 370 kPa, respectively. In contrast, X-azoPI containing planar pyromellitimide (PMDI) or cage-like bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxylic-diimide (BCDI) show smaller photomechanical responses. The superior photomechanical performance of X-azoPI with constrained cyclohexane-diimide (CHDI) units is attributed to an increased mobility of segments comprising "hinged" p-phenylene rings, azobenzene, and CHDI units in the cross-link sites. Blue light irradiation initiates the motions driven by photoisomerization/reorientation of azobenzenes connected to CHDI units, whose CD is then amplified, leading to longer-range segmental mobility, more local free volume, and culminating in large photoinduced bending. The trapping of redistributed CHDI's stereoisomers in X-azoPI backbone at Troom is implicated for the observed photothermal memory.
Azobenzene As a Photoswitchable Mechanophore

Yiran Li,Bin Xue,Jiahui Yang,Julong Jiang,Jing Liu,Yanyan Zhou,Junsheng Zhang,Mengjiao Wu,Yuan,Zhenshu Zhu,Zhi Jian Wang,Yulan Chen,Yu Harabuchi,Tasuku Nakajima,Wei Wang,Satoshi Maeda,Jian Ping Gong,Yi Cao

DOI: https://doi.org/10.1038/s41557-023-01389-6

IF: 24.274

2023-01-01

Nature Chemistry

Abstract:Azobenzene has been widely explored as a photoresponsive element in materials science. Although some studies have investigated the force-induced isomerization of azobenzene, the effect of force on the rupture of azobenzene has not been explored. Here we show that the light-induced structural change of azobenzene can also alter its rupture forces, making it an ideal light-responsive mechanophore. Using single-molecule force spectroscopy and ultrasonication, we found that cis and trans para -azobenzene isomers possess contrasting mechanical properties. Dynamic force spectroscopy experiments and quantum-chemical calculations in which azobenzene regioisomers were pulled from different directions revealed that the distinct rupture forces of the two isomers are due to the pulling direction rather than the energetic difference between the two isomers. These mechanical features of azobenzene can be used to rationally control the macroscopic fracture behaviours of polymer networks by photoillumination. The use of light-induced conformational changes to alter the mechanical response of mechanophores provides an attractive way to engineer polymer networks of light-regulatable mechanical properties.
Photomechanical Effects in Azobenzene-Containing Polymer Systems

YL Yu,M Nakano,T Ikeda

DOI: https://doi.org/10.5059/yukigoseikyokaishi.62.471

2004-01-01

Journal of Synthetic Organic Chemistry Japan

Abstract:Several kinds of photodeformable polymer systems containing azobenzenes, capable of generating photomechanical effects, are reviewed. In polymer amorphous systems including monolayers, gels and solid films, trans-cis photoisomerization of the azobenzene moieties accompanied by geometrical and dipolar changes caused contraction and expansion of the systems. Recently, polymer liquid-crystalline elastomers containing azobenzenes, a novel system able to produce the photomechanical effects, have been developed to achieve fast and large photoinduced deformations. It is interesting that not only photoinduced contraction but also photoinduced bending have been achieved. These deformations are ascribed to the subtle variation in microscopic ordering during the photochemical phase transition of the polymer liquid-crystalline elastomers. This new photomechanical system is potential for application in driving micromachines and nanomachines without the aid of batteries, motors and gears.
Photodriven Single-Crystal-To-Single-Crystal Transformation

Sheng-Li Huang,T. S. Andy Hor,Guo-Xin Jin

DOI: https://doi.org/10.1016/j.ccr.2016.06.009

IF: 24.833

2017-01-01

Coordination Chemistry Reviews

Abstract:Molecular architectures containing photosensitive units respond to light, giving dramatic variations of their structure. In particular, the crystalline packing phases offer the possibility of significant advances in crystal design and the understanding of solid-state photoreactivity. In this review we mainly focus on three different photoreactivity patterns, namely the isomerization of azobenzene, open-ring <-> closed-ring transformations of diarylethenes and cycloadditions of olefin pairs, as well as some examples of photoreactive crystals outside these types. Many interesting phototriggered functionalities are documented herein, such as photo-tuning of guest adsorption of azobenzene or diarylethene-based porous frameworks and crystalline organic polymers generated by photo-cycloaddition reactions taking place in the different networks. (C) 2016 Elsevier B.V. All rights reserved.
Reversible Light-Directed Self-Organized 3D Liquid Crystalline Photonic Nanostructures Doped with Azobenzene-Functionalized Bent-Shaped Molecules

Meng Wang,Wei Hu,Ling Wang,Duan-Yi Guo,Tsung-Hsien Lin,Lanying Zhang,Huai Yang

DOI: https://doi.org/10.1039/c8tc02200c

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:Self-organized 3D liquid crystalline photonic nanostructures with high light-directed controllability are developed by doping azobenzene-functionalized bent-shaped molecules.
Microspheres of Polyurethanes Functionalized with Push-Pull Type Azo Chromophores and Their Photoinduced Deformation Behavior

Yuqi Zhou,Bingyang Liu,Xiaogong Wang

DOI: https://doi.org/10.1016/j.polymer.2017.01.050

IF: 4.6

2017-01-01

Polymer

Abstract:A series of azo polyurethanes bearing push-pull type azo chromophores was synthesized by post polymerization azo-coupling reactions between a polyurethane precursor and diazonium salts of different aniline derivatives, respectively. Colloidal spheres with narrow size distributions were obtained by aggregation of these azo polyurethanes in DMF-H2O mixed solvents, which were induced by slowly increasing the water content. The self-assembling processes and formed structures were investigated by laser light scattering and transmission electron microscopy. When irradiated with linearly polarized light from Ar+ laser (488 nm) and diode solid state laser (532 nm), the azo polyurethane microspheres showed significant deformations elongated in the light polarization direction. The electron-withdrawing groups on the azo chromophores show a significant effect on the photoinduced deformation degree. These microspheres composed of the azo polyurethanes bearing carboxylic acid and trifluoromethyl groups as the electron-withdrawing substituents shows the largest deformation degrees when irradiated with 488 and 532 nm light, respectively. (C) 2017 Elsevier Ltd. All rights reserved.
Photoinduced Deformation of Liquid Crystal Polymers

Yuyun Liu,Jiu-An Lv,Futao Cheng,Yanlei Yu

DOI: https://doi.org/10.1117/12.2061762

2014-01-01

Abstract:Utilizing an optimized azobenzene precursor and polydimethylsiloxane-soft-template-based secondary replication, we achieved light-driven switching of superhydrophobic adhesion of water droplets on a micro-arrayed liquid crystal polymer film, which is cross-linked in nematic phase and guarantees a satisfying stability for practical application. Regulated by alternating irradiation of UV-Vis light (365 nm/530 nm), the micro-arrayed film showed an ideal quick (<1 min) and reversible switch of superhydrophobic adhesion. This kind of non-contact real-time controllable switching of microdroplet's adhesion might inspire and facilitate the designs and applications in novel microfluidic devices.
Photo-isomerization effect of the azobenzene chain on the opto-mechanical behavior of nematic polymer: A molecular dynamics study

Joonmyung Choi,Hayoung Chung,Jung-Hoon Yun,Maenghyo Cho

DOI: https://doi.org/10.1063/1.4903247

IF: 4

2014-12-01

Applied Physics Letters

Abstract:The opto-mechanical properties of a photo-responsive nematic polymer network (PRPN) are investigated using molecular dynamics simulation. For the implementation of the trans-to-cis isomerization of azo compounds, a switchable potential formalism for the N = N bond is applied to the crosslinked PRPN unit cell model. During the light switch-on and heating-up simulations at a wide range of temperatures, the scalar orientational order parameter for the mesogenic side group molecules, the effective photo-induced strain of the bulk polymer network, and the opto-mechanical properties are characterized. The correlation between the microstate which belongs to the molecular location and the macroscopically observed photostrain is identified according to the isomerization ratio of the diazene groups.

physics, applied
Preparation and photoinduced bending behavior of crosslinked azobenzene liquid-crystalline polymer fibers

Taiki Yoshino,Junichi Mamiya,Motoi Kinoshita,Yanlei Yu,Tomiki Ikeda

2006-01-01

Abstract:A liquid-crystalline monomer containing an azobenzene moiety was synthesized and copolymerized with an acrylate monomer with a hydroxyl group. Crosslinked azobenzene liquid-crystaline polymer fibers were obtained by the following method. Firstly, the copolymer and 4,4′-methylenebis(phenyl isocyanate) as a crosslinker were mixed on a hot stage. Then the mixture was pulled into a fiber. The photoinduced bending behavior of the obtained fiber has been investigated. When the fiber was exposed to UV light, the fiber bent toward the irradiation direction. Then the bent fiber reverted to the initial state upon exposure to visible light.
Regulating the Photodeformation Behavior of Azobenzene-Containing Polyimide Via Thermal Treatment

Menghan Zhang,Xuejie Sun,Jia Wei,Yanlei Yu

DOI: https://doi.org/10.1021/acsapm.4c02399

2024-01-01

ACS Applied Polymer Materials

Abstract:Photodeformable polymers have significant potential for untethered smart actuation due to their rapid response and versatile deformation behaviors. However, altering deformation behaviors typically requires preparing materials with different macromolecular structures. Here, we achieved controllable reversal of photodeformation behaviors (bending away from or toward the light source) in side-chain azobenzene polyimides by adjusting the thermal treatment conditions. Different thermal treatments introduced variations in the internal free volume of the material, leading to two distinct deformation mechanisms under blue light exposure and resulting in opposite macroscopic deformation behaviors. By choosing appropriate thermal treatment methods, we fabricated actuators with specific functionalities and utilized the correlation between deformation behavior and thermal treatment to demonstrate a detector for thermal history. This postsynthesis regulation of the photodeformation behavior offers a convenient and repeatable manner to engineer actuation on demand.
Photomechanical Deformation of Azobenzene-Functionalized Polyimides Synthesized with Bulky Substituents

Matthew L Baczkowski,David H Wang,Deborah H Lee,Kyung Min Lee,Matthew L Smith,Timothy J White,Loon-Seng Tan

DOI: https://doi.org/10.1021/acsmacrolett.7b00854

2017-12-19

Abstract:Photomechanical effects realized in azobenzene-functionalized polyimides have shown large deformation and an exceptional increase in photogenerated force output. Here, we synthesize and characterize the photomechanical output of a series of linear polyimide materials prepared with a bulky substituent, incorporated via the development of a new bis(azobenzene-diamine) monomer containing a 9,9-diphenylfluorene cardo structure (azoCBODA). All six azoCBODA-containing polyimides are amorphous and exhibit high glass transition temperatures (Tg) ranging from 298 to 358 °C, storage moduli ranging from 2.27 to 3.81 GPa (at 30 °C), and good thermal stability. The magnitude of the photoinduced mechanical response of the azobenzene-functionalized polyimide is correlated to the rotational freedom of the polyimide chains (resulting in extensive segmental mobility) and fractional free volume (FFV > 0.1).
Photoinduced Deformation Behavior of Crosslinked Azobenzene Liquid-Crystalline Polymer Films with Unimorph and Bimorph Structure

Mizuho Kondo,Jun-ichi Mamiya,Motoi Kinoshita,Tomiki Ikeda,Yanlei Yu

DOI: https://doi.org/10.1080/15421400701680952

IF: 0.7

2007-01-01

Molecular Crystals and Liquid Crystals

Abstract:The use of a crosslinked azobenzene liquid-crystalline polymer (CALP) system for micro-integrated actuators becomes especially attractive. CALPs can deform. along the alignment direction of mesogens upon irradiation of UV/visible light owing to photochemical phase transition. In this study, to improve the bending speed, CALP films with a homogenous alignment on one surface and a homeotropic alignment on the opposite surface (hybrid alignment) were prepared and their bending behavior was investigated. The films showed photoinduced bending whose direction was determined by the surface alignment treatments and the bending speed was greatly enhanced upon irradiation from both surfaces of the film at the same time.
Photodeformable Azobenzene-Containing Polyimide with Flexible Linkers and Molecular Alignment

Panpan Zhang,Zhongxu Lan,Jia Wei,Yanlei Yu

DOI: https://doi.org/10.1021/acsmacrolett.1c00040

IF: 5.8

2021-03-31

ACS Macro Letters

Abstract:Azobenzene-containing polyimides (azo-PIs) as photodeformable materials have attracted scientific attention in view of combining photoresponse and high performance (such as excellent mechanical and thermal properties). In the previously reported photodeformation of azo-PIs, polarized blue–green light was utilized to produce concerted motion of azobenzene moieties based on the mechanism of photoinduced reorientation. Herein, we explored a designed azo-PI undergoing photodeformation upon unpolarized light irradiation. The azo-PI film aligned by the hot-stretching process exhibited fast and reversible bending behavior under alternate ultraviolet (UV) and visible (vis) light irradiation, indicating the efficient nano-to-macroscopic propagation of molecular deformation of azobenzene. Besides, the aligned azo-PI film even bent in hot water (80 °C) and hot silicone oil (100 and 120 °C) with UV light irradiation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsmacrolett.1c00040?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsmacrolett.1c00040</a>.Experimental procedures (Figures S1 and S2), polymer characterization (Figures S3–S5), additional results, and supporting movie captions (Figures S6–S14 and Movies S1–S8) (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_001.pdf">PDF</a>)Movie S1 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_002.mp4">MP4</a>)Movie S2 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_003.mp4">MP4</a>)Movie S3 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_004.mp4">MP4</a>)Movie S4 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_005.mp4">MP4</a>)Movie S5 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_006.mp4">MP4</a>)Movie S6 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_007.mp4">MP4</a>)Movie S7 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_008.mp4">MP4</a>)Movie S8 (<a class="ext-link" href="/doi/suppl/10.1021/acsmacrolett.1c00040/suppl_file/mz1c00040_si_009.mp4">MP4</a>)This article has not yet been cited by other publications.

polymer science

Photoinduced Multi-Directional Deformation of Azobenzene Molecular Crystals

Molecular Dynamics Simulations on Photoinduced Switchable Tg and Self-Healing Behaviors of Azobenzene-Containing Polymers

Photoinduced Deformation of Amorphous Polyimide Enabled by an Improved Azobenzene Isomerization Efficiency

Photoinduced deformation behavior of poly(aryl ether)s with different azobenzene groups in the side chain

Azobenzene crystal polymorphism enables tunable photoinduced deformations, mechanical behaviors and photoluminescence properties

Fast Photoinduced Large Deformation of Colloidal Spheres from a Novel 4-arm Azobenzene Compound

Photoinduced Bending Behavior of Cross-Linked Azobenzene Liquid-Crystalline Polymer Films with a Poly(oxyethylene) Backbone.

Photoinduced Deformation of Amorphous Polyimide Enabled by Improved Azobenzene Isomerization Efficiency

Role of Alicyclic Conformation-Isomerization in the Photomechanical Performance of Azobenzene-Functionalized Cross-Linked Polyimides Containing Tetra-Substituted Cyclohexane Moieties

Azobenzene As a Photoswitchable Mechanophore

Photomechanical Effects in Azobenzene-Containing Polymer Systems

Photodriven Single-Crystal-To-Single-Crystal Transformation

Reversible Light-Directed Self-Organized 3D Liquid Crystalline Photonic Nanostructures Doped with Azobenzene-Functionalized Bent-Shaped Molecules

Microspheres of Polyurethanes Functionalized with Push-Pull Type Azo Chromophores and Their Photoinduced Deformation Behavior

Photoinduced Deformation of Liquid Crystal Polymers

Photo-isomerization effect of the azobenzene chain on the opto-mechanical behavior of nematic polymer: A molecular dynamics study

Preparation and photoinduced bending behavior of crosslinked azobenzene liquid-crystalline polymer fibers

Regulating the Photodeformation Behavior of Azobenzene-Containing Polyimide Via Thermal Treatment

Photomechanical Deformation of Azobenzene-Functionalized Polyimides Synthesized with Bulky Substituents

Photoinduced Deformation Behavior of Crosslinked Azobenzene Liquid-Crystalline Polymer Films with Unimorph and Bimorph Structure

Photodeformable Azobenzene-Containing Polyimide with Flexible Linkers and Molecular Alignment