Abstract:Dyes provide a notable environmental issue as a result of their intrinsic poisonous and carcinogenic characteristics. An estimated 60,000 metric tons of dyes has been discharged into the environment, leading to a substantial increase in water pollution. The mitigation of these dyes is a substantial and intricate challenge. The primary objective of this research is to conduct a comprehensive analysis of the adsorption of cationic dyes containing positively charged groups such as sulphonates, amines, and triphenylmethanes. The adsorption study was carried out using four different low-cost adsorbents derived from biowaste, specifically Groundnut Shell (GS), Mosambi Peel (MP), Mango Bark (MBARK), and Mango Leaves (ML). The adsorbent materials were characterized using FTIR, UV–Vis spectroscopy, scanning electron microscopy (SEM), point-of-zero charge (PZC), and BET techniques. The adsorption capacity was found to be between 1.5 and 2.2 mg/gm for Groundnut Shell, Mosambi Peel, Mango Bark, and Mango Leaves for individual dye removal (Crystal violet, Methylene blue, Rhodamine B, and Malachite green). It was observed that adsorbent derived from mango bark showed excellent adsorption (%) in a mono-component dye system and, thus, was explored for the simultaneous removal of a mixture of the same dyes. MBARK exhibited an excellent overall dye removal efficiency of 94.44% (Qe = 2.7 mg/g) for the dye mixture in 60 min. From a detailed kinetic investigation, it was concluded that the adsorption followed the pseudo-second-order model (R2= 0.99963 to 1 for different dyes and adsorbents) hinting at chemisorption. The effect of the pH of the analyte solution and the dosage of adsorbent was also studied for simultaneous removal. The isothermal studies demonstrated that the Langmuir adsorption model (R2 = 0.99416) was the best-fitted model, suggesting monolayer adsorption. The adsorption process was predicted to be governed by ion exchange, electrostatic interaction, hydrogen bonding, pi–pi interaction, etc., based on charge, functional groups, and pH of dyes and adsorbent. Thus, this study highlights the application of low-cost biowaste as a potential adsorbent for the mitigation of toxic industrial dyes present in wastewater.

Characterization and Utilization of Industrial Microbial Waste As Novel Adsorbent to Remove Single and Mixed Dyes from Water

Bacillus Amyloliquefaciens Biofilm As A Novel Biosorbent for the Removal of Crystal Violet from Solution

Sustainable Bio-Based Adsorbents for Simultaneous and Efficient Removal of Hazardous Dyes from Aqueous Solutions

Tailored ultra-tough, antimicrobial and recyclable hydrogels based on chitosan and ionic liquid modified montmorillonite with different chain lengths for efficient adsorption of organic dyes in wastewater

Novel Cetyltrimethylammonium Bromide Modified Mixed Adsorbent for Efficient Treatment of Dyeing and Printing Wastewater

Efficient Decontamination of Cationic Dyes from Synthetic Textile Wastewater Using Poly(acrylic acid) Composite Containing Amino Functionalized Biochar: A Mechanism Kinetic and Isotherm Study

Effective Removal of Methylene Blue Dye Using Low-Cost Essential Oil Industry Waste: Novel Hybrid Design Approach, Kinetic and Thermodynamic Evaluation

Preparation of Molecularly Imprinted Bacterial Cellulose Nanofiber Nonwovens for Selectively Removing Dye Molecule from Aqueous Solution

Efficient and sustainable treatment of anionic dye wastewaters using porous cationic diatomite

A Novel Low-Cost Bio-Sorbent Prepared from Crisp Persimmon Peel by Low-Temperature Pyrolysis for Adsorption of Organic Dyes

Application of electrospun N-doped carbon dots loaded cellulose acetate membranes as cationic dyes adsorbent

Multifunctional property of N,N-bis (carboxymethyl) glutamic acid modified biomass material: adsorption and degradation removals of cationic dyes in wastewater

Remediation of cationic dye from wastewater using a new environmentally friendly adsorbent: A response surface methodology and artificial neural network modeling study

Facile preparation of sodium alginate gel beads enhanced by polyamino-modified 3D carbon for efficient remediation of organic dyes in wastewater

Functionalized Bioadsorbent Application on Methylene Blue Removal From Wastewater—A Review

Adsorption of anionic and cationic azo dyes from wastewater using novel and effective multicomponent adsorbent

Water-stable methyl-modified MOF and mixed matrix membrane for efficient adsorption and separation of cationic dyes

Efficient removal of noxious methylene blue and crystal violet dyes at neutral conditions by reusable montmorillonite/NiFe2O4@amine-functionalized chitosan composite

Exploring the Potential of Pennisetum glaucum Composite for the Removal of Cationic and Anionic Dyes at Natural pH for Sustainable Waste Water Remediation

Polymeric Matrix of Modified Chitosan with Algae and Coal Fly Ash for a Toxic Cationic Dye Removal: Multivariable Optimization by Box-Behnken Design

Waste to wealth: Facile activation of red mud waste and insights into industrial reactive dye removal from wastewater