Abstract:Micro/mesoscale metal sheet hydroforming (SHF) process is an efficient approach suitable for mass production to fabricate metal parts with micro/mesochannel features. In conventional sheet hydroforming process, the channel's feature sizes (e. g., the channel width, fillet radius, etc.) are much greater than the sheet's thickness, so that the influence of the fillet and the inhomogeneous stress/strain distribution through the thickness direction can be ignored. However, the influence becomes increasingly important, because the thickness of the sheet and the feature dimensions of the microchannel are in the same magnitude as the feature sizes of the material and tools reduced to micro/mesoscale. In this paper, an analytical model with consideration of the inhomogeneous stress/strain distribution was developed to predict the channel profile at different pressures in micro/mesohydroforming process. Plane-strain deformation behaviors in the section of the workpiece were studied, and the relation function between the pressure and the channel height was established. Via this function, the channel height could be accurately predicted for a given pressure. Furthermore, an experimental setup was prepared, hydroforming experiments using microchannel dies with various geometric dimensions were conducted, and the channel height of the workpieces was measured. It was found that the experimental results matched well with the simulation results, which confirmed the validity of the analytical model proposed in this study. It is expected that the model will be beneficial in the optimization of the microchannel hydroforming process. [DOI: 10.1115/1.4006180]

An investigation on the formability of sheet metals in the micro/meso scale hydroforming process

On the Size Effects in Micro/meso Semisolid Extrusion–forging of A356 Aluminum Alloy

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Modeling of microchannel hydroforming process with thin metallic sheets

Forming limit of sheet metals in meso-scale plastic forming by using different failure criteria

Effects of preform on thickness distribution of hydroformed Y-shaped tube

Investigation into the Innovative Sheet Hydroforming and the Effect of Key Process Parameters

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Study on the Deformation Characteristics of the Sheet Hydroforming with a Movable Die

Formability Influenced by Process Loading Path of Double Sheet Hydroforming

Study of Size Effects on Deformation Behavior and Formability in Micro Metal Forming of Ti Foil

Evaluation of the formability of AA2198-T3 Al-Li alloy in warm sheet hydroforming

Hydroforming of Automotive Structural Components with Rectangular-Sections

Size effect affected formability of sheet metals in micro/meso scale plastic deformation: Experiment and modeling

Research On Micro-Forming Process Of Aluminum And Its Alloy

Micro/meso scale metallic sheet forming process analysis based on the strain gradient plasticity theory

Hydroforming of Typical Hollow Components

Effect of the process parameters on T-shaped tube hydroforming

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Study on Formability of Tube Hydroforming Through Elliptical Die Inserts

Investigation of the Effect of Forming Parameters in Incremental Sheet Forming Using a Micromechanics Based Damage Model