Abstract:A multiscale laminated model of 3D4d braided composite shafts based on a universal tubular unit cell is developed. The direct relation between the mesoscopic yarn structures and the macroscopic mechanical response is determined. The mechanical properties of three‐dimensional (3D) braided composites are related to damage evolution. However, the multi‐scale damage mechanism of 3D braided composite shafts remains unclear. The main purpose of this article is to propose a shell‐based multiscale finite element model for effectively predicting the compressive and torsional properties of 3D four‐directional (3D4d) braided composite shafts. Considering the relation between equivalent ply angles and yarn structures, the multiscale model was developed based on a universal tubular unit cell. The equivalent ply angle was derived through the yarns' local braiding and horizontal orientation angles, and the elastic properties of each equivalent ply were derived through the stiffness averaging method. Both derivations were achieved by creatively utilizing deformation gradient theory and Nanson's formula from continuum mechanics. LaRC04 failure criteria and energy‐based damage evolution law were implemented to characterize the equivalent UD‐ply's damage behaviors. The proposed model was validated experimentally, and good agreements were observed between the failure morphologies and load–displacement curves of FEA and experimental results. The results show that the fiber tension and compression damages are the major failure modes of 3D4d braided composite shafts under compressive and torque loads, respectively. Finally, a parametric study was carried out and compared with that from other literature to clarify the meaning of this article in relevant studies. It provides an efficient and useful tool for the design and manufacturing of 3D4d braided composite shafts with desirable mechanical properties. Highlights A shell‐based hierarchical multiscale model is developed for 3D braided composite shafts. An analyzing method is developed to investigate the tubular yarn structures. A large‐scale torsional experimental scheme is developed.

Experimental Study on the Torsion Behavior of a 3D 4-Directionally Braided Composite Shaft Using DIC and AE

Numerical Study on the Tensile Behavior of 3D Four Directional Cylindrical Braided Composite Shafts

Acoustic emission characterization of tensile damage in 3D braiding composite shafts

Damage and failure analyses of 3D4d braided composite shafts under torsional load and the effects of braid processing parameters on their torsional properties

Computational Analysis of Torsional Bulking Behavior of 3D 4-Directional Braided Composites Shafts

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Design on the driveshaft of 3D 4-Directional carbon fiber braided composites

A novel shell‐based hierarchical multiscale model for studying three‐dimensional four‐directional braided composite shafts

A Unit-Cell Model for Predicting the Elastic Constants of 3D Four Directional Cylindrical Braided Composite Shafts

Experimental Investigation of Compressive Damage Mechanisms on 3-D Braided Composites by Acoustic Emission

Compressive Experimental Investigation of 3D 4-Directional Braided Composites Board on Mesoscopic Failure Mechanism

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Investigation of parameterized braiding parameters and loading directions on compressive behavior and failure mechanism of 3D four-directional braided composites

Compressive Failure Characteristics of 3D Four-Directional Braided Composites with Prefabricated Holes

Bending damage behavior of 3D-C/C-TiC-Cu composite based on acoustic emission technology

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

Short Beam Shear Behavior and Failure Characterization of Hybrid 3D Braided Composites Structure with X-ray Micro-Computed Tomography

A novel mechanical behavior and failure mechanism analysis of 3D six-directional braided composites in liquid nitrogen subjected to compression

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Dynamic modeling of a 3-D 4-directional braided composite beam with a central rigid body