Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

Preventive Soot Blowing Strategy Based on State of Health Prediction for Coal-fired Power Plant Boiler

Predictive Control and Economic Performance Optimization of CFBB Combustion Process

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

Study on Optimization of Soot Blowing Based on Monitoring Model of Coal-Fired Power Station Soot Accumulation

Soot Blowing Optimization for Frequency in Economizers to Improve Boiler Performance in Coal-Fired Power Plant

An Optimization Study on Soot-Blowing of Air Preheaters in Coal-Fired Power Plant Boilers

Operation Optimization of Circulating Fluidized Bed Boiler for Energy Saving

Optimization of Soot Blowing of Coal-fired Boilers Based on UKF Predicted Health. Status

Soot Blowing Optimization for Platen Superheater of Coal‐fired Power Plant Boiler Based on Heat Loss Analysis

Soot Blowing Optimization for Coal-fired Boilers with Ash Accelerated Deposition Model Based on Gamma Process

On-line monitoring of ash fouling and soot-blowing optimization for convective heat exchanger in coal-fired power plant boiler

Improvement of slagging monitoring and soot-blowing of waterwall in a 650MWe coal-fired utility boiler

Soot﹣blowing optimization of boiler heating surface based on thermal performance mechanistic model and fuzzy comprehensive evaluation

Prediction of Pollution State of Heating Surface in Coal-Fired Utility Boilers

Soot-blowing optimization based on model of slagging monitoring around boiler furnace

Online Evaluation of the Boiler Energy Efficiency Associated with the Soot Blowing in Coal-Fired Power Plants

A Hybrid Method for Prediction of Ash Fouling on Heat Transfer Surfaces

Application of Deep Learning Algorithm in Optimization Control of Electrostatic Precipitator in Coal-Fired Power Plants

Optimization of Air Distribution and Coal Blending in Pulverized Coal Boilers for High-Temperature Corrosion Prevention Based on POD Reduced-Order Modeling

Research on Reducing Pollutant, Improving Efficiency and Enhancing Running Safety for 1000 MW Coal-Fired Boiler Based on Data-Driven Evolutionary Optimization and Online Retrieval Method

NOx emission reduction of coal‐fired power plants through data‐driven model and particle swarm optimization