Abstract:Most prevailing processes are incapable of removing Cr(III)-organic complexes efficiently and facing the problem of in-process formation of highly toxic Cr(VI) based on oxidation. The efficient decomplexation of Cr(III) complexes and simultaneous abatement of Cr with low Cr(VI) accumulation would be desirable in treatment of Cr(III)-complexed wastewater. Here, we found efficient degradation of Cr(III)-EDTA and simultaneous removal of Cr by forming Cr2O3 precipitate from simulated solution as well as an electroplating effluent under UV irradiation. The results showed a complete degradation of Cr(III)-EDTA after reaction time of 60 min and 70-80% of TOC mineralization within 180 min as well. About 90% of Cr(III) precipitated as Cr2O3 simultaneously, with the residual total Cr below 1.5 mg/L. The degradation of Cr(III)-EDTA was a stepwise de-acetate group process, as proven by the obvious attenuation of peaks related to carboxyl groups and C-C bond from FT-IR spectra of Cr(III)-EDTA and significant mineralization of TOC after UV irradiation. Based on negligible accumulation of Cr(VI) (less than 0.1 mg/L) under N2-sparged condition, the C-centered radicals from the β-fragmentation of O-centered radicals formed by photo-induced ligand-to-metal charge transfer were responsible for the in situ reduction of intermediate Cr(VI), resulting in the low accumulation of Cr(VI). The addition of 20 mg/L Fe2+ was capable of removing the remaining Cr(VI) and total Cr, with Cr(VI) and total Cr less than 0.1 and 1.0 mg/L, respectively. Moreover, the photo-oxidation process combined with Fe2+ addition were efficient in removing other Cr(III) complexes, such as Cr(III)-citrate and those from a realistic electroplating effluent. We believe that this study would provide an alternative option for efficient degradation of Cr(III) complexes and simultaneous abatement of Cr from contaminated water.

Decomplexation of electroplating wastewater by ozone-based advanced oxidation process

Decontamination of heavy metal complexes by advanced oxidation processes: A review

Coupled Cu(II)-EDTA Degradation and Cu(II) Removal from Acidic Wastewater by Ozonation: Performance, Products and Pathways

Complexed Heavy Metal Wastewater Treatment: Decomplexation Mechanisms Based on Advanced Oxidation Processes

Fenton/ozone-based oxidation and coagulation processes for removing metals (Cu, Ni)-EDTA from plating wastewater

Destruction of organic pollutants in reusable wastewater using advanced oxidation technology.

Efficient Treatment of an Electroplating Wastewater Containing Heavy Metal Ions, Cyanide, and Organics by H2o2 Oxidation Followed by the Anodic Fenton Process

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Electrochemical Removal of Metal-Organic Complexes in Metal Plating Wastewater: A Comparative Study of Cu-EDTA and Ni-EDTA Removal Mechanisms.

Study on the advanced treatment of electroplating phosphorus-containing wastewater by ozone oxidation-chemical precipitation process

Decomplexation of Cr(III)-EDTA and simultaneous abatement of total Cr by photo-oxidation: efficiency and in situ reduction of intermediate Cr(VI)

Removal of Trivalent Chromium in the Complex State of Trivalent Chromium Passivation Wastewater

Enhanced ozonation of Cu(II)-organic complexes and simultaneous recovery of aqueous Cu(II) by cathodic reduction

Targeted Decomplexation of Metal Complexes for Efficient Metal Recovery by Ozone/Percarbonate.

Research on Chemical WastewaterTreatment with Advanced Oxidation Processes

Key Factors Impacting Treatment Efficiency in Actual Copper Mineral Processing Wastewater by Ozonation

Oxidation of emerging biocides and antibiotics in wastewater by ozonation and the electro-peroxone process

Recovery process of mixed electroplating wastewater

Removal of Low-Concentration Nickel in Electroplating Wastewater Via Incomplete Decomplexation by Ozonation and Subsequent Resin Adsorption

Comparative performance evaluation of ozone oxidation and coagulation for the treatment of electroplating wastewater

Molecular Identification Guided Process Design for Advanced Treatment of Electroless Nickel Plating Effluent.