Abstract:In this research, a novel interfacial enhanced thin film composite nanofiltration (TFC NF) membrane with nail-fixed like surface structure and wave line like cross-section structure, good permeability and superior interfacial stability was prepared by interfacial polymerization (IP) on one-step in-situ aminated polyvinyl chloride (APVC) support layer. The effects of amination agent (triethylenetetramine, TETA) content on the support layers and the effects of the support layers with different degrees of amination on the performance of the TFC NF membranes were studied comprehensively. Furthermore, the interfacial bonding strength of the TFC NF membrane was explored by the inverse permeation test. It was concluded from the results that higher TETA content in casting solution led to the APVC membrane to form macroporous surface structure, thinner top skin layer and larger mean pore size. Meanwhile, more TETA molecules were grafted onto the PVC chains through nucleophilic substitution to participate in IP in a synergistic manner. Accordingly, the corresponding TFC NF membrane formed a nail-fixed like surface structure similar to semi-free-standing polyamide (PA) layer and wave line like cross-section structure with thinner and denser active layer. The water flux of the TFC NF membrane prepared with the optimized APVC membrane as the substrate membrane was increased by 395% at 0.6 MPa compared with the TFC NF membrane prepared with PVC membrane as the substrate membrane, while Na2SO4 rejection did not sacrifice and increased by 3.48%, which manifested that unique structure was favorable to speed up the water transmission and effectively conquered the trade-off effect. Moreover, the representative TFC NF membrane prepared with optimized APVC membrane as the substrate membrane with strong covalent bond between support layer and active layer demonstrated superior interfacial stability in the short-term circulating inverse permeation test.

Effect of Adding a Smart Potassium Ion-Responsive Copolymer into Polysulfone Support Membrane on the Performance of Thin-Film Composite Nanofiltration Membrane

Effect of mixed crosslinking agents on performance of thin-film-composite membranes

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

Polyamide/PVC Based Composite Hollow Fiber Nanofiltration Membranes: Effect of Substrate on Properties and Performance

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Preparation of TMC/TMPIP Nanofiltration Composite Membrane with Ultra-Thin Skin Layer

Codeposition of Catechol–polyethyleneimine Followed by Interfacial Polymerization for Nanofiltration Membranes with Enhanced Stability

Thin film composite polyesteramide membrane with the incorporation of rigidly-contorted binaphthol-based monomer for enhanced nanofiltration separation performance

Preparation of the interfacial enhanced PA/APVC nanofiltration membrane based on the in-situ amination of substrate membrane

An attempt to enhance water flux of hollow fiber polyamide composite nanofiltration membrane by the incorporation of hydrophilic and compatible PPTA/PSF microparticles

Polyphenol Coating As an Interlayer for Thin-Film Composite Membranes with Enhanced Nanofiltration Performance

Preparation of high permeance thin-film composite nanofiltration membrane on macroporous ceramic support

Interface Engineering of Microporous Polypropylene Membranes for Polyamide Thin-Film Composite Nanofiltration Membranes with Robust Structure and Superior Performance

High-performance Thin Film Nanocomposite Membranes Enabled by Nanomaterials with Different Dimensions for Nanofiltration

Preparation of polysulfone/sulfonated polysulfone-SiO 2 nanofiltration membrane and its performance characterization

A Facile Strategy toward the Preparation of a High-Performance Polyamide TFC Membrane with a CA/PVDF Support Layer

Enhancing Physiochemical Substrate Properties of Thin-Film Composite Membranes for Water and Wastewater Treatment via Engineered Osmosis Process

Tuning the nano-porosity and nano-morphology of nano-filtration (NF) membranes: Divalent metal nitrates modulated inter-facial polymerization

Fabrication and Performance of Novel Poly(piperazine-amide) Composite Nanofiltration Membranes Based on Various Poly(m-phenylene Isophthalamide) Substrates

Tannic Acid/Fe3+ Nanoscaffold for Interfacial Polymerization: Toward Enhanced Nanofiltration Performance.

High permeability Performance TFC Nanofiltration Membrane with Two dimensional Nanochannels Support Layer Fabricated by Dissolving of Nanosheets