Abstract:5-Hydroxymethylfurfural (5-HMF) is a value-added platform chemical, which can be obtained from pyrolysis of biomass materials, whereas related investigation on its selective production via catalytic fast pyrolysis (CFP) process is still insufficient. In this work, a zirconium-tin mixed metal oxide (ZrO2-SnO2) catalyst was developed for the selective production of 5-HMF from the in-situ CFP of cellulose. According to pyrolysis-chromatography/mass spectrometry (Py-GC/MS) tests, the ZrO2-SnO2 catalyst has better performance on the selective preparation of 5-HMF than single nano oxide ZrO2, SnO2, or their physical mixture. 5-HMF was sensitive to the reaction conditions, and its yield and selectivity always exhibited the tide of first increasing followed by decreasing along with the increase of Zr loading and catalyst-to-cellulose (CA-to-CL) ratio. At the optimum conditions with ZrO2-SnO2 of 15 wt% Zr loading (ZrO2-SnO2-15), pyrolysis temperature of 350 °C and CA-to-CL ratio of 2:1, the 5-HMF yield was 6.49 wt%, which was 4 times more than that of the non-catalytic process (1.35 wt%). Correspondingly, the selectivity of 5-HMF was up to 23.50 %. The catalyst characterization combined with the pyrolysis texts of several typical saccharides, including cellobiose, maltose, glucose, and mannose indicated that the ZrO2-SnO2-15 could promote the breakage of glycosidic bonds with the formation of reducing ends and the selective conversion of the reducing end to 5-HMF due to its mild acidity. Overall, the ZrO2-SnO2 is expected a promising catalyst for the CFP of cellulose to prepare 5-HMF.

High Yield Production of 5-Hydroxymethylfurfural from Carbohydrates over Phosphated TiO2-SiO2 Heterogeneous Catalyst

Highly Efficient One-Pot Conversion of Glucose to 5-Hydroxymethylfurfural over Acid–Base Bifunctional MCM-41 Mesoporous Silica under Mild Aqueous Conditions

Highly Efficient and Selective Preparation of 5-Hydroxymethylfurfural from Concentrated Carbohydrates Using Deep Eutectic Solvents

Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H<sub>2</sub>O media

Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Conversion of glucose to 5-hydroxymethyl furfural in water-acetonitrile-dimethyl sulfoxide solvent with aluminum on activated carbon and maleic acid

Formic Acid Enabled Selectivity Boosting in Transfer Hydrogenation of 5-Hydroxymethylfurfural to 2,5-Furandimethanol on Highly Dispersed Co–Nx Sites

Silicotungstic acid catalyst supported onto functionalized halloysite nanotubes (HNTs) utilized for the production of 5-hydroxymethylfurfural (5-HMF) from fructose

Transformation of Carbohydrates to 5-Hydroxymethylfurfural with High Efficiency by Tandem Catalysis

Ultra-thin layer HTaMoO 6 catalyst for the upgrading of carbohydrates into 5-hydroxymethylfurfural

Sulfonated carbon-titanium dioxide composite nanofiber tube catalysts for dehydration of sugars in biphasic solvents to obtain 5-hydroxymethylfurfural

Catalytic Conversion of Carbohydrates into 5-Hydroxymethylfurfural by Phosphotungstic Acid Encapsulated in MIL-101 (Cr, Sn) Catalyst in Deep Eutectic Solvents

Catalytic Conversion of Cellulose to 5‐Hydroxymethylfurfural: Advancements in Heterogeneous Catalysts and Cutting‐Edge Hydrolysis Strategies

Selective Catalytic Production of 5-Hydroxymethylfurfural from Glucose by Adjusting Catalyst Wettability.

A remarkable bifunctional carbon-based solid acid catalyst derived from waste bio-tar for efficient synthesis of 5-hydroxymethylfurfural from glucose

Selective hydrodeoxygenation of 5-hydromethylfurfural to 2,5-dimethylfuran over PtFe/C catalyst

Selective preparation of 5-hydroxymethylfurfural by catalytic fast pyrolysis of cellulose over zirconium-tin mixed metal oxides

Direct Conversion of Biomass-Derived Carbohydrates to 5-Hydroxymethylfurural over Water-Tolerant Niobium-Based Catalysts

A Carbon Catalyst Co-Doped with P and N for Efficient and Selective Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran

Efficient catalytic conversion of fructose into hydroxymethylfurfural by a novel carbon-based solid acid

Conversion of biomass-derived carbohydrates into 5-hydroxymethylfurfural catalyzed by sulfonic acid-functionalized carbon material with high strong-acid density in γ-valerolactone