Abstract:Fluorinated electrolytes based on fluoroethylene carbonate (FEC) have been considered as promising alternative electrolytes for high-voltage and high-energy capacity lithium-ion batteries (LIBs). However, the compatibility of the fluorinated electrolytes with graphite negative electrodes is unclear. In this paper, we have systematically investigated, for the first time, the stability of fluorinated electrolytes with graphite negative electrodes, and the result shows that unlike the ethylene carbonate (EC)-based electrolyte, the FEC-based electrolyte (EC was totally replaced by FEC) is incapable of forming a protective and effective solid electrolyte interphase (SEI) that protects the electrolyte from runaway reduction on the graphite surface. The reason is that the lowest unoccupied molecular orbital energy levels are also lowered by the introduction of fluorine into the solvent, and the FEC solvent has poorer resistance against reduction, leading to instability on the graphite negative electrode. To tackle this problem, two lithium salts of lithium bis(oxalato)borate and lithium difluoro(oxalato)borate (LiDFOB) have been investigated as negative-electrode film-forming additives. Incorporation of only 0.5 wt % LiDFOB to a FEC-based electrolyte [1.0 M LiPF6 in 3:7 (FEC-ethyl methyl carbonate)] results in excellent cycling performance of the graphite negative electrode. This improved property originates from the generation of a thinner and better quality SEI film with little LiF by the sacrificial reduction of the LiDFOB additive on the graphite negative electrode surface. On the other hand, this additive can stabilize the electrolyte by scavenging HF. Meanwhile, the incorporated LiDFOB additive has positive influence on the interphase layer on the positive electrode surface and significantly decreases the amount of HF formation, finally leading to improved cycling stability and rate capability of LiNi0.5Mn1.5O4 electrodes at a high cutoff voltage of 5 V. The data demonstrate that the LiDFOB additive not only exhibits a superior compatibility with graphite but also improves the electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 positive electrodes considerably, confirming its potential as a prospective, multifunctional additive for 5 V fluorinated electrolytes in high-energy capacity lithium-ion batteries (LIBs).

Lithium Difluoro(oxalate)borate Improving the Zero-Volt Storage Performance of Lithium-Ion Batteries by Offering Anode SEI Film Tolerance to High Potentials

Improved Zero-Charge Storage Performance of LiCoO2/Mesocarbon Microbead Lithium-Ion Batteries by Li5FeO4 Cathode Additive.

Lithium difluoro(oxalate)borate as electrolyte additive to form uniform, stable and LiF-rich solid electrolyte interphase for high performance lithium ion batteries

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

The Potential Regulation of Working Anode for Long-Term Zero-Volt Storage at 37 °C in Li-Ion Batteries

Targeted stabilization of solid electrolyte interphase and cathode electrolyte interphase in high-voltage lithium-metal batteries by an asymmetric sustained-release strategy

Insights into the multi-functional lithium difluoro(oxalate)borate additive in boosting Li-ion reaction kinetics for Li3VO4 anodes

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

Rational Design of an In-Build Quasi-Solid-state Electrolyte for High-Performance Lithium-Ion Batteries with the Silicon-Based Anode

Countering Voltage Decay, Redox Sluggishness, and Calendering Incompatibility by Near‐Zero‐Strain Interphase in Lithium‐Rich, Manganese‐Based Layered Oxide Electrodes

Tuning the Solution Structure of Electrolyte for Optimal Solid-Electrolyte-interphase Formation in High-Voltage Lithium Metal Batteries

Improving the cyclability performance of lithium-ion batteries by introducing lithium difluorophosphate (LiPO2F2) additive

Fluorinated Electrolytes for Li-Ion Batteries: The Lithium Difluoro(oxalato)borate Additive for Stabilizing the Solid Electrolyte Interphase

Improving the Durability of Lithium-Metal Anode via In situ Constructed Multilayer SEI

Unraveling the role of LiODFB salt as a SEI-forming additive for sodium-ion battery

High‐Voltage Stimulation Effect on Lithium Deposition for 4.6 V‐Class Lithium Metal Batteries

4,5-Difluoro-1,3-dioxolan-2-one As a Film-Forming Additive Improves the Cycling and Thermal Stability of SiO/C Anode Li-ion Batteries

A Fluorine Rich Borate Ionic Additive Enabling High-Voltage Li Metal Batteries

An Electrolyte with Less Space-Occupying Diluent at Cathode Inner Helmholtz Plane for Stable 4.6 V Lithium-Ion Batteries

Fluorinating Solid Electrolyte Interphase by Regulating Polymer–Solvent Interaction in Lithium Metal Batteries