Abstract:A holistic analysis of thermal insulation and ablative performance of flexible silicone rubber‐based composites was presented. The generic rules, which were obtained from the gathered data can be used as guidelines to design and prepare thermal ablative composites for thermal protection applications under harsh conditions. Silicone rubber‐based materials are important thermal protection materials for high‐temperature applications. In this work, a holistic analysis of silicone rubber‐based materials was conducted with an aim to comparatively study the ablative performance of different rubber matrices using the oxyacetylene flame. Six types of silicone rubber‐based composites were prepared in large quantities using a customized device, and the relationship between the ablative properties and influencing factors was elucidated, which was useful in guiding the design and preparation of flexible ablative materials for thermal protection purpose. The expansion and ceramicization of char layer, which was realized by introducing expandable graphite and alumina was found helpful in reducing line ablation rate. The increase in the thickness of char layer and the decrease in surface roughness indicated a successful implementation of the above strategy, which led to a significant decrease in line ablation rate and an increase in thermal insulation performance of the studied system. Moreover, a thermal ablative composite with excellent moldability after ablation process was prepared which showed a promising application as a reusable thermal protection material. This work provided guidelines for developing flexible thermal ablative composites, which can be targeted for practical applications in aerospace and fire protection sectors.

Novel designs of charring composites based on pore structure control and evaluation of their thermal protection performance

Evaluation of Numerical Ablation Model for Charring Composites

Evaluation and design methods for high‐efficiency charring composite under complex coupling mechanisms in both material and boundary layer

Numerical investigation of mesoscopic volumetric ablation of 3D braided charring composites

Design and Evaluation of Variable Porosity Charring Composite for Thermal Protection System of Reentry Vehicles

Influence Factors on the Multi-Field Coupling Performances of Charring Ablators on the Basis of a Mesoscopic Ablation Model

Pore scale visualization of thermal-fluid-structural evolution in the ablation of carbon/carbon composites

Inverse Identification of Temperature-Dependent Thermal Conductivity for Charring Ablators

Improving ablation properties of liquid silicone rubber composites by in situ construction of rich‐porous char layer

Design and Experimental Verification of Thermal Protective Materials Based on the New Thermal Protective Mechanism

In situ construction of fiber‐supported micro‐porous char structure to enhance anti‐ablative performance of silicone rubber composites

Microstructure, Thermophysical Property and Ablation Behavior of High Thermal Conductivity Carbon/carbon Composites after Heat-Treatment

Modeling and Validation of Ablative Thermal Response Combined with Microscopic Heat Transfer for Porous Ablative Materials

Multiscale, Elastic, and Low-Density Carbon Fibre / Siliconoxycarbide-Phenolic Interpenetrating Aerogel Nanocomposite for Ablative Thermal Protection

Modeling ablative behavior and thermal response of carbon/carbon composites

Experimental And Numerical Evaluation Of The Ablation Process Of Carbon/Carbon Composites Using High Velocity Oxygen Fuel System

A high-temperature volumetric ablation model for thermal protective composites

Enhanced ablation resistance of phenolic composites through the construction of a sea-island nanostructured char layer via in-situ catalytic graphitization of incorporated Salen-Ni complex

Controlled pyrolysis of epoxy through highly silicone-branched structures to construct a compact porous char layer for ablation resistant coatings

Ablation behaviour of interpenetrating Al/graphite composites

Comparison of the ablative performance of silicone rubber‐based composites by analyzing a large number of samples