Air/fuel Mixing in Jet Flames
Adriana Palacios,Derek Bradley,Qiang Wang,Xin Li,Longhua Hu
DOI: https://doi.org/10.1016/j.proci.2020.07.083
IF: 6.535
2021-01-01
Proceedings of the Combustion Institute
Abstract:The paper examines eight diverse regimes in which fuels can mix and react with air. These comprise: (i) Lifted subsonic; and (ii) supersonic jet flames, with (iii) and without (iv) cross flows; (v) Rim-attached flames; (vi) Early Downwash flames; (vii) Downwash-attached jet flames; and (viii) Fire Whirls. Correlations of characteristics within these regimes are principally in terms of a dimensionless Flow Number, U*, Cross Flow Reynolds number, Re-c, and, for Fire Whirls, a dimensionless Critical Velocity, CV. Boundaries of seven of the eight regimes are identified, through plots of U*, against Re-c, and of the eighth through a plot of CV against U*. The circumstances of transitions between regimes are identified. The study involves a variety of CH4 cross flow flame measurements, in a wind tunnel. Cross flows can initially create a small lee-side flame downwash, due to the depression in pressure. With increasing fuel flow this might extend 1.3 m downwards from the horizontal tip of the vertical burner. Jet flames can attach to the downwash, which can become significant above Re-c approximate to 2000. More extensive downwash might further delay blow-off. Regime boundaries are constructed on the U*/Re-c diagram covering lifted flames, early downwash, and downwash-attached flames. The most powerful flames tend to be lifted, choked, flames, with cross flow, and fire whirls. Combustion becomes less efficient at high Re-c and low U*, although CH4 was efficiently reacted. Experimental values of the ratio of fuel to air velocity, u/u(c), of CH4 flames ranged between about 10 and 30 for lifted flames, and between 0.3 and 3.6, at blow-off, for rim-attached flames. The latter comprise an important category, often intermediate between lifted flames and downwash-attached flames. (C) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.