Abstract:An efficient and ultrafast method to synthesize well-dispersed functional nanoparticles with controlled size and distribution remains largely unanswered. Conventional synthesis methods (wet chemistry, spray pyrolysis, among others) tend to be less controllable, leading to nanoparticle aggregation as well as a wide particle size distribution. Therefore, a short synthesis duration is critical to control nanoparticle size and minimize aggregation. Here we report a rapid and universal high temperature thermal shock method to form and uniformly disperse metallic nanoparticles on a conductive carbon support, such as carbon nanofibers (CNF). First, the desired metal salt precursor is homogeneously mixed into an aqueous solution and loaded onto the conductive carbon support. After drying, the precursor-loaded CNF film is attached to electrical leads inside an argon-filled glovebox to facilitate the electrically triggered Joule heating procedure. An applied electrical pulse from an external power source induces the thermal shock process by heating the precursor-loaded CNF to ~2000 K for mere milliseconds at ultrafast heating/cooling rates (~105 K/s). Due to the short high temperature exposure and rapid cooling rate, nearly any precursor metal salt can decompose and nucleate into uniformly distributed metallic nanoparticles with ultrafine particle sizes without damaging the conductive support. Note that kinetic control can also be achieved by tuning the synthesis parameters (pulse duration, heating temperature, heating/cooling rates). Specifically, as the pulse duration increases to seconds, the temporal limitations for diffusion and migration broaden, allowing nanoparticles with larger diameters to form with a wider particle size distribution. In the field of energy storage, nanoparticle-decorated conductive supports are ideal battery electrodes. To demonstrate the proposed manufacturing method, lithium-oxygen (Li-O2) batteries were successfully assembled and tested using the nanocatalyst-decorated CNF films. Bifunctional ruthenium nanoparticles were synthesized by the rapid thermal shock method to increase the electrocatalytic activity of the CNF-based Li-O2 cathodes and improve oxygen reaction kinetics. The results indicate the potential of this rapid manufacturing method to synthesize an array of non-agglomerated nanoparticle-decorated supports for energy storage devices and beyond.

Fast synthesis and separation of nanoparticles via in-situ reactive flash nanoprecipitation and pH tuning

Fast and Facile Preparation of S Nanoparticle by Flash Nanoprecipitation for Lithium-sulfur Battery

Ultra-fast Self-Assembly and Stabilization of Reactive Nanoparticles in Reduced Graphene Oxide Films

High Temperature Thermal Shock Synthesis of Catalyst-Decorated Nanostructures for Energy Storage

An Economic and Scalable Approach to Synthesize High Power Lifepo4/C Nanocomposites from Nano-Fepo4 Precipitated from an Impinging Jet Reactor

Rapid, in Situ Synthesis of High Capacity Battery Anodes Through High Temperature Radiation-Based Thermal Shock

One-Pot Synthesis Of Ultra-Small Magnetite Nanoparticles On The Surface Of Reduced Graphene Oxide Nanosheets As Anodes For Sodium-Ion Batteries

Ultrafast Spray Pyrolysis Fabrication of A Nanophase Znmn2o4 Anode Towards High-Performance Li-Ion Batteries

In Situ FTIR-Assisted Synthesis of Nickel Hexacyanoferrate Cathodes for Long-Life Sodium-Ion Batteries

In Situ High Temperature Synthesis of Single-Component Metallic Nanoparticles

Colloidal Spray Pyrolysis: A New Fabrication Technology for Nanostructured Energy Storage Materials

Amorphous FePO4/Carbon Nanotube Cathode Preparation Via in Situ Nanoprecipitation and Coagulation in a Microreactor.

Mesoporous Nitrogen-Doped Carbon Nanospheres As Sulfur Matrix and a Novel Chelate-Modified Separator for High-Performance Room-Temperature Na-S Batteries.

Chemical Prelithiation/Presodiation Strategies Toward Controllable and Scalable Synthesis of Microsized Nanoporous Tin at Room Temperature for High‐Energy Sodium‐Ion Batteries

Convenient and High-Yielding Strategy for Preparing Nano-Znmn2o4 As Anode Material in Lithium-Ion Batteries

Metal Nanoparticle Harvesting by Continuous Rotating Electrodeposition and Separation

Ultrafast Metal Electrodeposition Revealed by in Situ Optical Imaging and Theoretical Modeling Towards Fast‐Charging Zn Battery Chemistry

Scalable Room-Temperature Synthesis of Multi-shelled Na3(VOPO4)2F Microsphere Cathodes

Low‐Cost Zinc Substitution of Iron‐Based Prussian Blue Analogs as Long Lifespan Cathode Materials for Fast Charging Sodium‐Ion Batteries

In Situ Generation of Flash Graphene Supported Spherical Bismuth Nanoparticles in Less than 200 ms for Highly Selective Carbon Dioxide Electroreduction

Ultrafine Sn 4 P 3 Nanocrystals from Chloride Reduction on Mechanically Activated Na Surface for Sodium/lithium Ion Batteries