Abstract:The predominant method for improving the mechanical characteristics of aluminum -lithium (Al-Li) alloys during laser welding is by regulating the transition from columnar crystals to equiaxed crystals. The transition is facilitated through the incorporation of TiC particles, which play a crucial role in augmenting the strength and toughness of the aluminum alloy. The inclusion of TiC particles offers a new opportunity to enhance the utilization of Al-Li alloys in laser welding procedures. The main aim of this study is to control the transition from columnar to equiaxed crystal structures by creating a TiC nanoparticle-reinforced aluminum alloy filler wire. This is intended to improve the properties of laser -welded joints. The study investigates the impact of different TiC particle contents on the microstructural characteristics. The presence of TiC particles is noted to enhance the transformation of columnar crystals into equiaxed crystals in the welded joints, resulting in a refined microstructure. The augmentation of particle content results in a notable reduction in the average grain size, decreasing from 78.25 mu m to 37.15 mu m. This alteration shifts the directional growth preference from specific crystallographic axes to a stochastic trajectory. Significantly, when the particle content reaches 0.6 wt%, remarkable enhancements in both tensile strength and elongation are evident, resulting in an ultimate tensile strength of 318 MPa and an elongation of 4.8 %. The dispersed configuration of TiC particles plays a pivotal role in hindering the movement of dislocations, consequently increasing the energy necessary for this mechanism. Moreover, the existence of these particles at grain boundaries impedes the propagation of cracks by altering the direction of the crack path, absorbing additional energy, and consequently improving toughness. An evident pattern emerges when examining higher particle concentrations, indicating that a decrease in ultimate tensile strength is concomitant with an increase in elongation.

Crystal Plasticity in Fusion Zone of a Hybrid Laser Welded Al Alloys Joint: from Nanoscale to Macroscale

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Interpretation of mechanical properties gradient in laser-welded joints: Experiments and grain morphology-dependent crystal plasticity modeling

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Crystal plasticity quantification of laser peening strengthening effects on AA2195-T6 friction stir welded joints

Plasticity of Laser-Processed Nanoscale AlAl2Cu Eutectic Alloy

Crystal Plasticity Model Analysis for the Macro-to-Micro Mechanical Behavior of Different Sub-Regions in a Marine Steel Weld

Crystal Plasticity Modeling for Mechanical Property Prediction of AA2195-T6 Friction Stir Welded Joints

Microstructure Evolution and Fracture Behavior of 2060 AlLi Alloy by Laser Welding with TiC Nanoparticle-Reinforced Filling Wire

Micro-crystallographically revealing the plasticity-evolved behaviors of thick Ti–6Al–4V laser-arc hybrid welded joint

Crystal Plasticity Evaluation of Laser Peening Effects on Improving High-Cycle Fatigue Life of Al-Li Friction Stir Welded Joints

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Crystal plasticity–based finite element modeling and experimental study for high strain rate microscale laser shock clinching of copper foil

Microstructure evolution and fracture behavior of 2060 Al Li alloy by laser welding with TiC nanoparticle-reinforced filling wire

New insight into microstructure and mechanical properties of heterostructures 7075 Al joint prepared via single mode laser welding

The Effect of Microstructure and Welding-Induced Plasticity on the Strength of Ni–Mo–Cr Alloy Welds

A hybrid multiscale computational framework of crystal plasticity at submicron scales

High-strength and tunable plasticity in sputtered Al–Cr alloys with multistage phase transformations

Controlling the Columnar-to-equiaxed Transition and Crack Propagation Behavior of Laser Welded Al-Li Alloy Reinforced with TiC Nanoparticles

Crystal Plasticity Evaluation of Laser Peening Effects on Improving High-Cycle Fatigue Properties of Al-Li Friction Stir Welded Joints

Improved strength and ductility on laser beam welded joints of 7085Al matrix nanocomposites by in-situ ZrB 2 nanoparticles and Al 3 (Er, Zr) nanoprecipitates