Abstract:Pretreatment is one of the key steps in the efficient conversion of lignocellulose into fuel ethanol. During the pretreatment process, a large amount of barrier components such as lignin and hemicellulose can be removed, which can effectively increase the productive adsorption of the cellulase to cellulose, thereby effectively improving the subsequent enzymatic hydrolysis yield. Paulownia has a large annual output, short growth cycle and high processing waste. It is a potential material for the preparation of bio-energy and other chemicals. In order to achieve high-efficiency conversion of paulownia woody biomass material to bioethanol, and promote efficient enzymatic hydrolysis of paulownia material, the raw material was pretreated to break its original biological resistance, degrade and remove enzymatic hydrolysis barrier components, expose and retain more cellulose components. In this work, Paulownia was used as the experimental material, and the raw material was chemically pretreated with acetic acid and sodium sulfite, analyzing the effect of different treatment methods on the chemical compositions and structural characteristics of samples. The composition analysis showed that the relative content of glucan in the samples increased to different degrees after pretreatment, and the alkaline sodium sulfite synergistic treatment of paulownia increased most obviously. The data showed that the alkaline sodium sulfite synergistic treatment had a good delignification effect and could degrade some xylan component, so the relative content of glucan was significantly increased to 67. 48% (the relative content of glucan in the raw material was 46. 81%). In addition, the physicochemical structures of all paulownia samples were analyzed by FTIR, XRD and XPS to explore the effects of different pretreatments on the structure of samples. FTIR analysis showed that the characteristic absorption of lignin was significantly weakened by the alkaline sodium sulfite synergistic treatment, and the characteristic absorption of cellulose was enhanced, indicating that the lignin had a certain removal, and the relative content of cellulose had increased; XRD analysis showed that the fiber surface of pretreated Paulownia was destroyed, the amorphous substances such as lignin and hemicellulose were partially removed, and the crystallinity of cellulose increased to varying degrees. Among them, after alkaline sodium sulfite synergistic treatment, the cellulose crystallinity increased significantly to 58. 98% (the cellulose crystallinity of the raw material was about 40. 23%) , the peak position of 002 shifted to the right, the diffraction intensity of diffraction peak increased obviously, the peak shape became higher and the sharpness increased; XPS analysis showed that the surface carbohydrate content increased and the surface lignin content decreased after the alkaline sodium sulfite synergistic treatment. All the structural characterization analysis showed that the alkaline sodium sulfite synergistic treatment had the greatest destructive effect on the structure of Paulownia, the most lignin degradation and the best cellulose retention, which could increase the accessibility of cellulase to cellulose and effectively improve the subsequent cellulase hydrolysis efficiency, and thereby promote the efficient conversion of paulownia raw material to fuel ethanol. The results of structural characterization analysis were consistent with the chemical composition rules.

Effects of Furfurylation on Acoustic Vibration Performance of Paulownia Wood

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Microstructural and Thermo-Mechanical Characterization of Furfurylated Douglas Fir

High-Pressure Treatment Effects on Density Profile, Surface Roughness, Hardness, and Abrasion Resistance of Paulownia Wood Boards

Effect of Impregnation with a Low-Concentration Furfuryl Alcohol Aqueous Solution on Hygroscopic Properties of Chinese Fir and Poplar Wood

Adhesion performance of furfurylated plywood bonded with polyurethane and epoxy adhesives

Effect of Furfurylation on Bamboo-Scrimber Composites

Mechanistic Study of the Synergistic Interaction of Furfuryl Alcohol and Caprolactam in the Modification of Pinus massoniana Earlywood and Latewood

Improving fast-growing poplar wood with furfuryl alcohol and a hyperbranched polymer

Acoustic and Viscoelastic Properties of String Instrument Fretboards Made of Radiata Pine by Densification and Impregnation with Furfuryl Alcohol Resin

Leachability of Fast-Growing Wood Impregnated with Low Concentrations of Furfuryl Alcohol

Microstructure of chemically modified wood using X-ray computed tomography in relation to wetting properties

Fabrication and mechanism analysis of wood polymer composites with improved hydrophobicity, dimensional stability and mechanical strength

Influence of NaOH/phenol mole ratio on the structure and performance of Phenol-Urea-Formaldehyde resin

Effective strategy for fabricating surface impregnated and unilaterally densified wood with furfuryl alcohol/flame retardants for enhanced mechanical performance and flame retardancy

Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

Wood Modification by Furfuryl Alcohol Resulted in a Delayed Decomposition Response in Rhodonia (Postia) placenta

Structural Properties and Composition of Paulownia : Effect of Acetic Acid and Sodium Sulfite Combined Pretreatment

Optimization of Dilute Acid Pretreatment of Paulownia for the Production of Bioethanol by Respond Surface Methodology

Green Bio-Derived Epoxidized Linseed-Oil Plasticizer Improves the Toughness, Strength, and Dimensional Stability of Furfuryl Alcohol-Modified Wood

Fire Retardancy and Leaching Resistance of Furfurylated Pine Wood (Pinus sylvestris L.) Treated with Guanyl-Urea Phosphate