Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Acoustic and Viscoelastic Properties of String Instrument Fretboards Made of Radiata Pine by Densification and Impregnation with Furfuryl Alcohol Resin

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Microstructural and Thermo-Mechanical Characterization of Furfurylated Douglas Fir

Effective strategy for fabricating surface impregnated and unilaterally densified wood with furfuryl alcohol/flame retardants for enhanced mechanical performance and flame retardancy

Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

Investigating the acoustical properties of carbon fiber-, glass fiber-, and hemp fiber-reinforced polyester composites

Adhesion performance of furfurylated plywood bonded with polyurethane and epoxy adhesives

Incorporation of In Situ Synthesized Nano-Copper Modified Phenol-Formaldehyde Resin to Improve the Mechanical Properties of Chinese Fir: A Preliminary Study

Comparison Of Flexural Properties Of Pinewood With Fea Simulation For Marine Application

Effect of Impregnation with a Low-Concentration Furfuryl Alcohol Aqueous Solution on Hygroscopic Properties of Chinese Fir and Poplar Wood

Modification of Fast-Growing Chinese Fir Wood with Unsaturated Polyester Resin: Impregnation Technology and Efficiency

A novel flax fibre composite material for stringed instrument fingerboards

Effect of resin content on the water-resistant, mechanical, and thermal properties of scrimber made from radiata pine wood (Pinus radiata D. Don)

Evaluating the Mechanical and Fire-Resistance Properties of Modified Fast-Growing Chinese Fir Timber with Boric-Phenol-formaldehyde Resin

Effect of Furfurylation on Bamboo-Scrimber Composites

Acoustic Emission and Numerical Analysis of Pine Beams Retrofitted with FRP and Poplar Wood

Acoustic properties of glubam and SPF

Effect of indented growth rings on spruce wood mechanical properties and subsequent violin dynamics

Dynamic mechanical properties of violin wood and the tone qualities of violins. I: Audiofrequency complex shear compliance, modulus, and shear sound velocity and attenuation measurements

Research Status and Prospect of Acoustic Vibration Properties Modification of Wood Used for Soundboard