Abstract:The increasing implementation of lithium-ion batteries (LIBs) for the fast growing electric vehicle market calls for further improvements in energy density and drives research and innovation to investigate beyond state-of-the-art cell chemistries [1] . Currently, the capacity of the commonly employed transition metal oxide cathodes (NMC series) is approaching their theoretical limit. Thus, to further promote the energy density of LIBs, the most promising strategies are the adoption of a high-voltage spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) cathode in combination with a high energy density anode. While commercial grades of LNMO are now available, the main challenge toward their implementation is the identification of suitable electrolyte systems with high oxidative stability enabling safe operation of LNMO cathodes at voltages beyond 4.7 V vs Li/Li + , which are also compatible with advanced anode materials operating at low potential. Indeed, electrolytes represent a crucial component in LIBs, and hence a great deal of research has been focusing on the next generation electrolyte systems. These should present a wide electrochemical stability window, high ion conductivity over a wide range of temperature, good thermal stability, and the ability to form stable interphases. [2] In this work we present results on a range of novel electrolytes, based on previous publications [3-5] including super concentrated systems with unconventional solvents to improve the anodic stability, beyond LiPF 6 salts to mitigate transition metal dissolution at the cathode, and phosphorous and boron-based additives to improve the stability of the solid/electrolyte interphase (SEI) at the anode. The electrolytes are comprehensively characterised in terms of ionic conductivity over a range of temperatures (see Fig. 1a), viscosity, and thermal stability. Electrochemical impedance spectra (EIS) has been carried out in symmetrical lithium // lithium cells to investigate the interphase stability evolution upon time. Linear sweep voltammetry has been conducted to investigate the anodic stability (see Fig. 1b). The systems have been then investigated in combination with high voltage LNMO cathode, graphite anodes as well as a novel silicon/graphite composite anode. The results will highlight the results achieved so far toward the identification of suitable electrolytes for high energy density Li-ion cells, while discussing the remaining challenges and strategies to mitigate them. [1] Energies 2017, 10(9), 1314, G. Berckmans, M. Messagie, J. Smekens, N. Omar, L. Vanhaverbeke, J. V. Mierlo. [2] Chem. Soc. Rev., 2021, 50, 10486, X. Fan, C. Wang. [3] J. Am. Chem. Soc., 136 (2014) p. 5039, Y. Yamada, K. Furukawa, K. Sodeyama, K. Kikuchi, M. Yaegashi, Y. Takeyama & A. Yamada. [4] Nature Communications, 7 (2016) 12032, J. Wang, Y. Yamada, K. Sodeyama, C. H. Chiang, Y. Tateyama & A. Yamada [5] J. Mater. Sci: Mat. Elec. , 30 (2019) p. 5098, H. Zhou, B. Liu, D. Xia, C. Yin & J. Li Figure 1

Stability Analysis for 5V High Energy Density Pouch Batteries of Si Anode and SL/EMC Electrolytes

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Modulation and quantitative study of conformal electrode-electrolyte interfacial chemistry toward high-energy-density LiNi0.6Co0.2Mn0.2O2‖SiO-C pouch cells

Fluorinated Solvent‐Coupled Anion‐Derived Interphase to Stabilize Silicon Microparticle Anodes for High‐Energy‐Density Batteries

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes

Enhancing the interfacial stability of high‐energy Si/graphite||LiNi0.88Co0.09Mn0.03O2 batteries employing a dual‐anion ionic liquid‐based electrolyte

Enabling robust structural and interfacial stability of micron-Si anode toward high-performance liquid and solid-state lithium-ion batteries

Lithium plating-free 1 Ah-level high-voltage lithium-ion pouch battery via ambi-functional pentaerythritol disulfate

A Novel Multifunctional Additive Strategy Improves the Cycling Stability and Thermal Stability of SiO/C Anode Li-ion Batteries

Improving the Interfacial Stability of Ultrahigh-Nickel Cathode with PEO-based Electrolyte by Targeted Chemical Reactions

Revisiting the designing criteria of advanced solid electrolyte interphase on lithium metal anode under practical condition

Material-electrolyte Interfacial Interaction Enabling the Formation of an Inorganic-Rich Solid Electrolyte Interphase for Fast-Charging Si-based Lithium-Ion Batteries

Ethylene Carbonate Free Electrolytes with High Oxidative Stability for High Voltage Lnmo Spinel Cathode in Li-Ion Cells

Regulation of Molecular Microheterogeneity in Electrolytes Enables Ampere-Hour-Level Aqueous LiMn2O4||Li4Ti5O12 Pouch Cells

Ultralong Cycling and Safe Lithium-Sulfur Pouch Cells for Sustainable Energy Storage

Optimization of the Form Factors of Advanced Li‐S Pouch Cells

Robust Multiscale Electron/Ion Transport and Enhanced Structural Stability in SiOx Semi-Solid Anolytes Enabled by Trifunctional Artificial Interfaces for High-Performance Li-Ion Slurry Flow Batteries

Si-Based Anodes: Advances and Challenges in Li-Ion Batteries for Enhanced Stability

Molecular Reactivity and Interface Stability Modification in In‐Situ Gel Electrolyte for High Performance Quasi‐Solid‐State Lithium Metal Batteries

Novel Composite Electrolyte Additive for Enhancing the Thermal and Cycling Stability of SiO/C Anode Li-ion Battery

Adapting Simultaneous in Operando Electrochemical Quartz Crystal Microbalance (EQCM) and Electrochemical Impedance Spectroscopy (EIS) to Studies of SEI Layer Formation on Amorphous Silicon Anodes