Abstract:Background: Vibration signature acquired from a gear mesh can be used to identify the defect present in a gear mesh hence can be used to diagnose the condition of a gear mesh. But the signal acquired from the subject may not be noise free and may be non stationary. Methods: Before going for the analysis of the acquired signal a preprocessing on the acquired signal is required to make it noise free. In the present work in first phase, the acquired vibration signal is filtered to reduce the noise and to improve the SNR (signal to noise ratio). The filtering is done by an Adaptive Noise Cancellation (ANC) technique. A modified Leaky Least Mean Square (LLMS) based adaptive algorithm along with a digital filter is used to achieve the ANC. The signal acquired from a healthy gear is used as the reference signal for the adaptive filter based de-noising process. In the second phase of the present work Adaptive Wavelet Transform (AWT) is used to detect the fault by extracting the features from the filtered vibration signal. From the signal pattern the adaptive wavelet is designed. The adaptive wavelet scalogram is compared with the standard wavelet scalogram. Results: The result shows that the adaptive wavelet scalogram is better in analyzing the vibration signal. In this work a gear drive experimental set-up is made. Two different types of defective gears are used for the experiment. In type-1 defective gear one tooth is broken and in type-2 defective gear two teeth are broken. Initially, the vibration signal is acquired from a healthy gear which is used as the reference signal. Then the vibration signal from type-1 defective gear and type-2 defective gear is acquired and processed for the analysis and to identify the defects. Conclusion: The present work shows that with the application of modified-LLMS algorithm and AWT the proposed technique of signal processing is more suitable for the fault identification and hence for the condition monitoring of the gear.

A New Adaptive Evolutionary Digital Filter Based on Alternately Evolutionary Rules for Fault Detection of Gear Tooth Spalling

A New Particle Swarm Optimization Aided Evolutionary Digital Filter for Noise Cancellation in Early Fault Diagnosis of Rotating Machinery

An Improved Adaptive Minimum Entropy Deconvolution Method in Bearing Fault Detection

Gear Fault Feature Extraction Based on Improved EMD and Morphological Filter

Application of Adaptive Wavelet Transform for Gear Fault Diagnosis Using Modified-LLMS Based Filtered Vibration Signal

A Mechanical Fault Detection Strategy Based on the Doubly Iterative Empirical Mode Decomposition

An Effective EMI Source Reconstruction Method Based on Adaptive Dynamic Differential Evolution

All time-scale decomposition method and its application in gear fault diagnosis

Adaptive Convolution Sparse Filtering Method for the Fault Diagnosis of an Engine Timing Gearbox

A novel adaptive blind deconvolution algorithm: application to feature extraction of weak faults in RV reducer gears

A fast filtering method based on adaptive impulsive wavelet for the gear fault diagnosis

A Signal-Filtering and Feature-Enhancement Method Based on Ensemble Local Mean Decomposition and Adaptive Morphological Filtering

A noise reduction method based on adaptive weighted symplectic geometry decomposition and its application in early gear fault diagnosis

Acoustic Feature Enhancement in Rolling Bearing Fault Diagnosis Using Sparsity-Oriented Multipoint Optimal Minimum Entropy Deconvolution Adjusted Method

An adaptive enhanced envelope spectrum technique for bearing fault detection in conditions characterized by strong noise

Iterative feature mode decomposition: A novel adaptive denoising method for mechanical fault diagnosis

Gear pitting fault diagnosis using raw acoustic emission signal based on deep learning

A Recursive Denoising Learning for Gear Fault Diagnosis Based on Acoustic Signal in Real Industrial Noise Condition

A New Vibration Signal Processing Method for Gearbox Fault Detection

Adaptive minimum noise amplitude deconvolution and its application for early fault diagnosis of rolling bearings

Early Fault Detection of Rolling Bearings Based on Time-Varying Filtering Empirical Mode Decomposition and Adaptive Multipoint Optimal Minimum Entropy Deconvolution Adjusted