Abstract:A hydrophilic membrane commonly performs better in resisting fouling. But most prevailing polymeric membrane materials are hydrophobic thus prone to be fouled in practical operations. The current study presents a facile strategy for the fabrication of superhydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes on the basis of a blending method and a dip-coating technique. A carboxyl-rich substance was firstly blended as an additive in the PVDF membrane matrix during fabrication. The incorporated carboxyl groups acted as anchor sites for the subsequent binding of amine-grafted silica nanoparticles (NPs). After a simple dip-coating operation, the PVDF membrane would be covalently functionalized to be superhydrophilic. Three types of carboxyl-rich additives including poly(methacrylic acid sodium salt), sodium alginate, and ethylenediaminetetraacetic acid (EDTA) were separately used to prepare different primary membranes for respective functionalization operations. The resultant membranes were systematically characterized in terms of hydrophilicity, morphology, permeability, and antifouling performance. Consequently, the simple dip-coating functionalization dramatically enhanced the surface hydrophilicity of all the additive-blended PVDF membranes. All the functionalized membranes obtained a significantly lower initial contact angle, which instantly reduced to < 5 degrees within several seconds. This could be attributed to the hydrophilic chains grafted on the NPs and the proper micro-/nano topography offered by the stack of NPs. Particularly, the EDTA-blended membranes achieved a higher and more stable hydrophilicity. Also, all the functionalized membranes obtained higher water permeabilities as compared with the pristine membrane. Moreover, all the superhydrophilic membranes restored over 80% flux (much higher than the similar to 53% for the pristine membrane) after cleaning in the fouling tests, demonstrating dramatically enhanced antifouling capacity.

Improved Surface Hydrophilicity and Antifouling Property of Nanofiltration Membrane by Grafting NH2‐functionalized Silica Nanoparticles

High flux positively charged nanofiltration membranes prepared by UV-initiated graft polymerization of methacrylatoethyl trimethyl ammonium chloride (DMC) onto polysulfone membranes

Construction of Nonfouling Nanofiltration Membrane Via Introducing Uniformly Tunable Zwitterionic Layer

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Polyhydroxy Group Functionalized Zwitterion for a Polyamide Nanofiltration Membrane with High Water Permeation and Antifouling Performance

Anti-Fouling Performance of Mixed Matrix PVDF Membranes with Mono-Hydroxyl Poly(dimethylsiloxane) (PDMS-OH) Grafted Silica Nanoparticles

Enhancing membrane separation performance in the conditions of different water electrical conductivity and fouling types via surface grafting modification of a nanofiltration membrane, NF90

In-situ formation of epoxy derived polyethylene glycol crosslinking network on polyamide nanofiltration membrane with enhanced antifouling performance

Improvement of filtration and antifouling performance of nanofibrous sterile membrane by one-step grafting zwitterionic compound

Surface functionalization via synergistic grafting of surface-modified silica nanoparticles and layered double hydroxide nanosheets for fabrication of superhydrophilic but relatively oleophobic antifouling membranes

Preparation and properties of a novel pH-stable nanofiltration membrane embedded with amino-modified silicon carbide

A Facile Approach to Fabrication of Superhydrophilic Ultrafiltration Membranes with Surface-Tailored Nanoparticles

Superhydrophilic Polyvinylidene Fluoride Membrane with Hierarchical Surface Structures Fabricated Via Nanoimprint and Nanoparticle Grafting

Fabrication of polyamide/zwitterion functionalized mesoporous silica nanofiltration membrane with highly enhanced antifouling performance

Facile preparation of antifouling nanofiltration membrane by grafting zwitterions for reuse of shale gas wastewater

Mitigating Silica Fouling and Improving PPCP Removal by Modified NF90 Using In Situ Radical Graft Polymerization

Hydrophilic carbon-carbon covalent linkage network structure for strong acid/alkali resistant and antifouling nanofiltration membrane

Perfluoro-functionalized polyethyleneimine that enhances antifouling property of nanofiltration membranes

Facile Synthesis of Micro-Eggette Patterned Nanofiltration Membrane with Enhanced Anti-Fouling and Rejection Performance

Highly hydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes via postfabrication grafting of surface-tailored silica nanoparticles.

Engineering of Ag-nanoparticle-encapsulated intermediate layer by tannic acid-inspired chemistry towards thin film nanocomposite membranes of superior antibiofouling property