Abstract:Reciprocal toolpaths with four-axis simultaneous motion of five-axis or four-axis machine tools are commonly used in the machining of blades which are widely applied in high-end equipment such as the aero-engine and the marine steam turbine. Due to the complex geometry of the blades, the tool orientation always suffers from frequent swing for this kind of toolpaths, which induces unnecessary acceleration/deceleration of the feed axes, thus degrading processing efficiency and quality. Although there are tool orientation optimization methods aiming at solving the above problem, they are mainly proposed for universal processing of the toolpaths for complex surfaces. Different from them, this paper proposes a piecewise decoupling tool orientation re-scheduling method for this kind of toolpath specifically, which takes full use of the characteristic of the reciprocal toolpaths of the blades, and takes the monotonous variation of rotation axes as an additional constraint. The re-scheduling process is realized based on the construction of a S-θ plane, where the scheduling problem is converted to the adjustment of a S-θ curve inside a feasible channel. Through two procedures, namely linearization scheduling and control-point assigning-based smoothing, the tool orientation path expressed by the S-θ curve can be effectively scheduled in a piecewise manner, and the smoothness between two adjacent pieces of the toolpaths can be ensured directly. The whole algorithm is lightweight and does not involve complex iterative operations or functional optimization solutions. Simulation and experimental tests verify the feasibility and superiority of this method. The results show that the machining efficiency of the blade is improved by 24.5%, due to the reduction of the requirement on highest feed-axis kinematics parameters after rescheduling. In addition, compared with the existing methods, the proposed method not only can improve the dynamics of feed axes in multi-axis machining, but also has advantages in computational complexity and monotonic variation property of the tool orientation.

Real-time feedrate scheduling for five-axis machining by simultaneously planning linear and angular trajectories

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Five-axis trajectory generation based on kinematic constraints and optimisation

A Novel Local Smoothing Method for Five-Axis Machining With Time-Synchronization Feedrate Scheduling

Interval Partition-Based Feedrate Scheduling with Axial Drive Constraints for Five-Axis Spline Toolpaths

Look-ahead-window-based Interval Adaptive Feedrate Scheduling for Long Five-Axis Spline Toolpaths under Axial Drive Constraints

An Adaptive Feedrate Scheduling Method With Multi-Constraints For Five-Axis Machine Tools

Feedrate Blending Method for Five-Axis Linear Tool Path under Geometric and Kinematic Constraints

Jerk-limited feedrate scheduling and optimization for five-axis machining using new piecewise linear programming approach

Double B-Spline Curve-Fitting and Synchronization-Integrated Feedrate Scheduling Method for Five-Axis Linear-Segment Toolpath

VARIABLE FEEDRATE INTERPOLATION OF NURBS TOOLPATH WITH GEOMETRIC AND KINEMATICAL CONSTRAINTS FOR FIVE-AXIS CNC MACHINING

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

Feedrate scheduling of a five-axis hybrid robot for milling considering drive constraints

A Symmetrical Arrangement Strategy Based Real-Time Toolpath Planning Method for a 5-Dof Fully Parallel Machining Robot

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

Piecewise Decoupling Tool Orientation Re-Scheduling for Four-Axis Reciprocal Toolpaths of Blades Based on S-θ Plane with Monotonicity Constraint

The feedrate scheduling of parametric interpolator with geometry, process and drive constraints for multi-axis CNC machine tools

Adaptive Feedrate Interpolation with Multiconstraints for Five-Axis Parametric Toolpath

The optimal feedrate planning on five-axis parametric tool path with geometric and kinematic constraints for CNC machine tools

An Adaptive Feedrate Scheduling Method of Dual Nurbs Curve Interpolator for Precision Five-Axis Cnc Machining

Kinematics Performance Oriented Smoothing Method to Plan Tool Orientations for 5-Axis Ball-End CNC Machining