Abstract:In inductive power transfer systems, misalignment can lead to inconsistent output power. In this article, a topology based on a primary-side detuned multifrequency compensation circuit is proposed to provide consistent output over a wide misalignment range. This topology exhibits multiple intersecting power versus coupling coefficient curves given multiple switching frequencies. The coupling range, and associated misalignment range, can be extended without increasing power and current variability by changing the switching frequency strategically at curve intersections. Parameter design and selection of the number of switching frequencies are presented. Fundamental relationships between power variation and coupling range are established. With this approach, a choice of two suitable switching frequencies changes output power by only 10% over a coupling coefficient range from 0.14 to 0.35. Three frequencies can support lower power variation or a wider coupling range. Primary current at low coupling is lower with the strategy than for conventional alternatives because reactive power can be limited. A 1.5 kW prototype has been prepared to verify the topology. The prototype confirms a power variation of 10% over a coupling coefficient range from 0.14 to 0.35 with two frequencies. With three frequencies, power variation drops to 6.7% over the same coupling range.

Analytical Design of an S/SP Compensated IPT System to Minimize Output Voltage Fluctuation under Predetermined Coupling Coefficient Range

Analysis and Design of an S/SP Compensated IPT System to Minimize Output Voltage Fluctuation Versus Coupling Coefficient and Load Variation.

Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.

Analysis and Design of an IPT System Based on S/SP Compensation with Improved Output Voltage Regulation.

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Minimizing Primary Current Based on Asymmetric Parameter Design Method under Wide Load Range and Variable Coupling Condition in Inductive Power Transfer Systems

Minimizing Current in Inductive Power Transfer Systems With an Asymmetrical Factor for Misalignment Tolerance and Wide Load Range

Balanced Design Method for LCL/LCL Compensation Achieving Wide Load Range and High Misalignment Tolerance

Investigation on Different Compensation Topologies in Inductively Coupled Power Transfer System

Analysis and Design of Multifrequency Compensation Strategy for Wide Misalignment Tolerance in Inductive Power Transfer Systems

Tuning Method Based T-model for LCC/S Compensated IPT System with Constant Current Output Characteristics

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

Detuned Dual-Frequency Compensation for Wide Misalignment Tolerance in Inductive Power Transfer Systems

Compact Capacitive Compensation for Adjustable Load-Independent Output and Zero-Phase-Angle Input for High Efficiency IPT Systems

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

Particle Swarm Optimization-Based Parameter Design Method for S/ CLC -Compensated IPT Systems Featuring High Tolerance to Misalignment and Load Variation

An LCC-SP Compensated Inductive Power Transfer System and Design Considerations for Enhancing Misalignment Tolerance.

Analysis, Design, and Optimization of LC/S Compensation Topology with Excellent Load-Independent Voltage Output for Inductive Power Transfer

Design Considerations of Compensation Topologies in ICPT System

Design of LCC-S Compensation Topology and Optimization of Misalignment Tolerance for Inductive Power Transfer

Analysis and Design of High-Misalignment-Tolerant Compensation Topologies with Constant-Current or Constant-Voltage Output for IPT Systems