Abstract:Poly(lactic acid) (PLA), as a kind of aliphatic polyester derived from biomass with excellent mechanical strength, biocompatibility and biodegradability, is a kind of green polymers with promising potential application. However, the application of PLA as a commodity polyester has been restricted dramatically because of its brittleness and flammability nature. It is still a great challenge to improve flame retardancy and toughness of PLA simultaneously by a simple blending method. In this work, copolymer ionomer (PCLA-PIU) was prepared by chain extension copolymerization of hydroxyl terminated poly(e-caprolactone) (PCL), PLA prepolymer and phenylhypophosphate, and then incorporated with ammonium polyphosphate (APP) for synergistic modification of PLA. The ionomer can act as a compatibilizer to enhance the dispersion of APP in PLA matrix because of its PLA segments and phenylhypophosphate groups. The SEM observation shows that the APP particles dispersed in PLA/PCLA-PIU/APP composite has significantly smaller size and uniform dispersity, compared to the PLA/APP20. The phenyl hypophosphate groups in the ionomer also has an excellent synergistic effect with APP for improving the flame-retardance of PLA. The flame-retardant properties and mechanism of the PLA and its composites were investigated by LOI, UL-94, Cone calorimeter test, SEM, EDS, Raman spectroscopy, etc. Compared with neat PLA and PLA/APP, the composite PLA/PCLA-PIU10/APP10 containing 10 wt% of PCLAP-IU and 10 wt% of APP10 achieves the V-0 rating in UL-94 burning test with limiting oxygen index (LOI) as high as 27.6%. The heat release rate and total heat release of PLA/PCLA-PIU10/APP10 are also reduced significantly to 254.9 kW/m(2) and 55.8 MJ/m(2), respectively. SEM and Raman analysis for char residues after Cone calorimeter test suggest PCLA-PIU and APP had synergistic effect on promoting charring of PLA, which result in compact char residue with high graphitization degree, therefore effectively improving the flame-retardant efficiency. Moreover, the toughness of PLA is improved effectively by the flexible PCL segments of ionomers, resulting in a PLA/PCLA-PIU/APP composite with improved flame retardancy and toughness simultaneously. The mechanical properties test results show that the toughness of the modified PLA (10.3 kJ/m(2) of PLA/PCLA-PIU10/APP10) is significantly improved compared to those of neat PLA (3.7 kJ/m(2)) and PLA/APP20 (2.5 kJ/m(2)).

Crystallization, Flame‐retardant, and Mechanical Behaviors of Poly(lactic Acid)\9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide–calcium Montmorillonite Nanocomposite

Crystallization Behavior and Water Vapor Permeability of Poly(Lactic Acid) Nanocomposite under Oscillatory Shear

Crystallization, Mechanical and Flame-retardant Properties of Poly(lactic Acid) Composites with DOPO and DOPO-POSS

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Functionalized MWCNTs modified flame retardant PLA nanocomposites and cold rolling process for improving mechanical properties

Flame rating of nano clay/MCC/PLA composites with both reinforced strength and toughness

Crystallization and Flame‐retardant Properties of Polylactic Acid Composites with Polyhedral Octaphenyl Silsesquioxane

Flammability Properties of Intumescent Flame Retardant Polylactic Acid/layered Silicate Nanocomposites

Synergistic Effect of Flame Retardants and Graphitic Carbon Nitride on Flame Retardancy of Polylactide Composites

The effect of different organic modified montmorillonites (OMMTs) on the thermal properties and flammability of PLA/MCAPP/lignin systems

Mechanical Properties and Degrading Behaviors of Aluminum Hypophosphite-Poly(Lactic Acid) (PLA) Nanocomposites

Combustion and Pyrolysis Behaviors of Flame Retardant Poly (lactic Acid) Composites Containing Phosphaphenanthrene and Maleimide Molecules

Synchronously Enhanced Flame Retardancy and Mechanical Properties of Polylactic Acid Via In-Situ Assembly of Polyphosphazene Nanoparticles on Ammonium Polyphosphate

Effect Of Phosphorus-Based Compounds On The Flame Retardancy And Mechacnical Properties

Studies on morphologies and thermal properties of poly(lactic acid)/polycaprolactone/organic-modified montmorillonite nanocomposites

Flame Retardant and Toughening Modification of Poly(lactic acid) with Phenylhypophosphate Ionomer/Ammonium Polyphosphate

The influence of multiple modified MMT on the thermal and fire behavior of poly (lactic acid) nanocomposites

Manufacturing, Mechanical and Flame Retardant Properties of Poly(lactic Acid) Biocomposites Based on Calcium Magnesium Phytate and Carbon Nanotubes

Reactable versus soluble DOPO derivatives in poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) composites: Flame retardance, mechanical properties and morphology

Comparison of Precipitated Calcium Carbonate/Polylactic Acid and Halloysite/Polylactic Acid Nanocomposites

Development of Flame-retardant Thermosetting Poly (Lactic acid) (PLA) and Its Curing Kinetics