Abstract:It is of great significance to develop green, sustainable additives to improve the thermal stability and flame retardancy of biopolymers. In this work, a synergistic modification of P/N elements to bamboo biochar (mBC) was successfully achieved by grafting a reaction of phytic acid and urea with preoxidized bamboo biochar. Fourier transform infrared spectroscopy, X-ray diffraction, nuclear magnetic resonance and scanning electron microscope determinations of the mBC demonstrated a successive grafting of phytic acid and urea to the originally porous surface. The ground mBC was blended with polylactic acid (PLA) to prepare mBC/PLA composites by extrusion and hot pressing. Mechanical strength studies showed a compromise in rigidity, which might originate from the mBC overdose and its limited miscibility with the resin. The thermogravimetric results supported the fact that the enhancement of thermal stability and flame retardancy of the composites with the mBC dosage, which showed that the mBC dosage in the PLA composites was not only lower than that of the conventional flame retardants, but also outperformed the counterparts using BC modified by inorganic phosphoric acid and urea. The mBC was prone to accelerate the earlier decomposition of the composites (30 °C lower in decomposition) and generate a continuous, dense residual carbon layer, which provides an effective shield resisting the mass and heat transfer between the combustion area and the underlying composite matrix. Only 10 wt% of mBC dosage could achieve a V-0 rating (UL94) for the composite, with a higher limiting oxygen index up to 28.3% compared to 20.7% for that of the virgin PLA; the cone colorimetric results also suggested that the flame retardancy had been greatly improved for all composites. In this work, biobased P-/N-containing bamboo biochar would be expected as a nontoxic biochar-based flame retardant that serves as green filler in polymer composites.

Manufacturing, Mechanical and Flame Retardant Properties of Poly(lactic Acid) Biocomposites Based on Calcium Magnesium Phytate and Carbon Nanotubes

Intumescent-Grafted Bamboo Charcoal: A Natural Nontoxic Fire-Retardant Filler for Polylactic Acid (PLA) Composites

A novel bio‐based charcoal‐forming agent based on chitosan and phytate@Mg to improve the flame retardancy of poly(lactic acid)

Phytic Acid-Based Flame Retardant and Its Application to Poly(lactic Acid) Composites

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Mechanically robust and flame-retardant poly(lactide)/poly(butylene adipate-co-terephthalate) composites based on carbon nanotubes and ammonium polyphosphate

Fabrication of Phytic Acid/Urea Co-Modified Bamboo Biochar and Its Application as Green Flame Retardant for Polylactic Acid Resins

Preparation and Mechanism of Toughened and Flame-Retardant Bio-Based Polylactic Acid Composites

Enhancement of Flame Retardancy and Mechanical Properties of Polylactic Acid with a Biodegradable Fire-Retardant Filler System Based on Bamboo Charcoal

Development Of Biodegradable Flame-Retardant Bamboo Charcoal Composites, Part Ii: Thermal Degradation, Gas Phase, And Elemental Analyses

A nimble strategy for enabling bioderived flame retardants with strikingly enhanced interfacial compatibility in poly (lactic acid) composites

Development of Biodegradable Flame-Retardant Bamboo Charcoal Composites, Part I: Thermal and Elemental Analyses.

Synergistic Effect of Flame Retardants and Graphitic Carbon Nitride on Flame Retardancy of Polylactide Composites

Combustion properties and thermal degradation behaviors of biobased polylactide composites filled with calcium hypophosphite

Flame Retardant Poly (lactic Acid) Biocomposites Based on Azo‐boron Coupled 4,4′‐sulfonyldiphenol and Its Combination with Calcium Lignosulfonate—crystalline and Mechanical Properties

Grafting cellulose nanocrystals with phosphazene-containing compound for simultaneously enhancing the flame retardancy and mechanical properties of polylactic acid

Synthesis of phenylphosphorylated microcrystal cellulose biobased flame retardants and its flame-retardant modification on PLA biomaterials

Enhancement of flame retardant performance of bio-based polylactic acid composites with the incorporation of aluminum hypophosphite and expanded graphite

Synchronously Enhanced Flame Retardancy and Mechanical Properties of Polylactic Acid Via In-Situ Assembly of Polyphosphazene Nanoparticles on Ammonium Polyphosphate

Enhancing Flame Retardancy of Polylactic Acid with a Novel Fully Bio‐based Flame Retardant synthesized from Phytic Acid and Cytosine

Thermal, Crystalline and Mechanical Properties of Flame Retarded Poly(lactic Acid) with a PBO-like Small Molecule - Phenylphosphonic Bis(2-aminobenzothiazole)