Microstructural Evolution and Mechanical Behavior of Novel TiZrTaxNbMo Refractory High-Entropy Alloys
Xiangyang Shen,Zihe Guo,Feng Liu,Fuyu Dong,Yue Zhang,Chao Liu,Binbin Wang,Liangshun Luo,Yanqing Su,Jun Cheng,Xiaoguang Yuan,Peter K. Liaw
DOI: https://doi.org/10.1016/j.jallcom.2024.174459
IF: 6.2
2024-01-01
Journal of Alloys and Compounds
Abstract:The refractory high-entropy alloy (RHEA) with a body-centered-cubic (BCC) solid-solution structure has excellent high-temperature softening resistance, which has attracted wide interest in the field of high-temperature alloys. However, its limited room-temperature plasticity has greatly hindered its engineering application. To obtain an excellent strength-plasticity matching relationship, in this reported study, the Ta content in the high-entropy alloy (HEA) was adjusted to rectify this shortcoming. A series of TiZrTaxNbMo (x = 1.0, 0.9, 0.8, 0.7, and 0.6 atomic percent, at.%) RHEAs were prepared using the vacuum arc-melting technique, and the microstructure and mechanical properties of these RHEA alloys were systematically investigated. The experimental results show that the TiZrTaxNbMo RHEAs are composed of main BCC1 and minor BCC2 phases, which exhibit a dendritic structure. By reducing the Ta content, the elemental segregation caused by the non-equilibrium solidification is reduced. In terms of mechanical properties, with the decrease of Ta content, the hardness and room-temperature yield strength of the alloy decreases slightly, but the room-temperature plasticity increases significantly. The Ta0.7 alloy has the highest plasticity (34.8%), which is about twice that of the equimolar Ta 1.0 alloy, while the yield strength remained at 1297MPa. The excellent mechanical properties of the alloys can be attributed to solid-solution strengthening and the formation of moderate amounts of interdendritic regions. The interaction between slip bands and dislocations formed during compression of the Ta0.7 alloy decreased its work hardening. Moreover, the theoretical model of solid-solution strengthening elucidates that the calculated values of the alloy’s yield strength are consistent with that obtained experimentally.