Abstract:In this paper, we review our recent work on multi-parameter harsh environment sensing using asymmetric Bragg gratings inscribed by IR femtosecond irradiation, which includes the investigations of fiber Bragg gratings inscribed by graded-index silica multimode fibers and polarization maintaining (PM) single mode fibers. The unique features of this type of grating are: (1) formed by multi-photon ionization, this kind of grating can withstand temperature as high as 1000 °C, which makes it suitable for harsh environment sensing; (2) bending (or pressure, strain) and ambient temperature fluctuations affect the shapes of multiple transmission dips in different ways, which enables multi-parameter sensing capability. The principle of multi-parameter sensing of the multimode fiber gratings is based on the fact that multimode fiber gratings have multiple resonant dips in spectrum and the change of spectral shape is different for different types of perturbations (e.g., temperature and pressure). The main challenge of sensing using multimode fiber is that the shape of spectrum also depends on the excitation condition, which makes the analysis of the sensing data complicated. On the other hand, the PM single mode fiber supports only two linearly polarized modes, which results in two resonant dips in the transmission spectrum. Since measured parameters such as the temperature and bending affect the transmission spectrum of two dips in different ways, one can implement multi-parameter sensing in harsh environment using PM fiber. Note that it is much easier to analyze the data of two dips (in the case of PM fibers) instead of multiple dips (in the case of multimode fibers). Finally, we also investigate the ultra thin multimode and PM single mode harsh environment fiber gratings for multi-parameter sensing applications. After etching the most part of the cladding, both multimode and PM single mode fiber grating spectra become sensitive to ambient refractive index changes, and their sensitivity to bending and strain is also enhanced. This enables the application for multi-parameter chemical/bio and pressure sensing.

Microstructured PMMA POF Chirped Bragg Gratings for Strain Sensing

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Chirped POF Bragg Grating Production Utilizing UV Cure Adhesive Coating for Multiparameter Sensing

Compact Dual-Strain Sensitivity Polymer Optical Fiber Grating for Multi-Parameter Sensing

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Tunable Chirped fiber Bragg gratings in mPOF

A Simple Strain Sensor Using Polymer Fiber Bragg Grating and Long-Period Fiber Grating

Hot Water-Assisted Fabrication of Chirped Polymer Optical Fiber Bragg Gratings.

Bragg Grating Device Fabrication in Undoped PMMA Mpof at 266 Nm UV Waveleng

Adhesive Assisted Fabrication of Chirped POF Bragg Grating

Bragg-Grating-Based Photonic Strain and Temperature Sensor Foils Realized Using Imprinting and Operating at Very Near Infrared Wavelengths

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Real-Time Plasmonic Strain Sensors Based on Surface Relief Diffraction Gratings

Bragg Gratings Inscription in TS-Doped PMMA POF by Using 248-Nm KrF Pulses

Femtosecond Laser Inscribed POF Bragg Grating for Flexible and Wearable Sensing Applications

Fabrication of tunable chirped mPOF Bragg gratings using a uniform phase mask.

Inscription of Bragg gratings in undoped PMMA mPOF with Nd:YAG laser at 266 nm wavelength

Influence of the Cladding Structure in PMMA Mpofs Mechanical Properties for Strain Sensors Applications

Thermal Profile Detection Through High-Sensitivity Fiber Optic Chirped Bragg Grating on Microstructured PMMA Fiber

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.

Multi-parameter harsh environment sensing using asymmetric Bragg gratings inscribed by IR femtosecond irradiation