Blast Loading Model of the RC Column under Close-in Explosion Induced by the Double-End-initiation Explosive Cylinder

Ye Hu,Li Chen,Qin Fang,Hengbo Xiang

DOI: https://doi.org/10.1016/j.engstruct.2018.08.013

IF: 5.582

2018-01-01

Engineering Structures

Abstract:Charge configuration has a significant impact on the damage of structural components subjected to close-in explosion. To develop a blast loading model on the RC column that can consider the charge shape and detonation configuration, a series of field tests of close-in explosion initiated at two ends of an explosive cylinder (double end-initiation) were carried out. Highly-centralized blast loading histories were recorded on the mid-span area of the RC column in the field test. A detailed numerical model was developed in the commercial software AUTODYN, which showed a good agreement with the test data. The influences of charge shape, diameter-to length (D/L) ratio, scaled distance, and detonation position on the overpressure and impulse were discussed. Analytical results reveal that the blast wave propagation and loadings on the column component under close-in explosion are significantly dependent on both shape and initiation-point, which is far different from that of the far-field explosion. The peak reflected overpressure and impulse are up to 3.5 and 2 times larger than those of the center-point-initiated charge, which is actually induced by the self-Mach-reflection of close-in double-end-initiation. An applicable blast loading model under close-in explosion induced by the double-end-initiation explosive cylinder considering D/L ratio and scaled distance was finally established based on the test data and numerical calculations.