Abstract:Electrospinning is a commonly used and versatile method to produce scaffolds (often biodegradable) for 3D tissue engineering.(1, 2, 3) Many tissues in vivo undergo biaxial distension to varying extents such as skin, bladder, pelvic floor and even the hard palate as children grow. In producing scaffolds for these purposes there is a need to develop scaffolds of appropriate biomechanical properties (whether achieved without or with cells) and which are sterile for clinical use. The focus of this paper is not how to establish basic electrospinning parameters (as there is extensive literature on electrospinning) but on how to modify spun scaffolds post production to make them fit for tissue engineering purposes--here thickness, mechanical properties and sterilisation (required for clinical use) are considered and we also describe how cells can be cultured on scaffolds and subjected to biaxial strain to condition them for specific applications. Electrospinning tends to produce thin sheets; as the electrospinning collector becomes coated with insulating fibres it becomes a poor conductor such that fibres no longer deposit on it. Hence we describe approaches to produce thicker structures by heat or vapour annealing increasing the strength of scaffolds but not necessarily the elasticity. Sequential spinning of scaffolds of different polymers to achieve complex scaffolds is also described. Sterilisation methodologies can adversely affect strength and elasticity of scaffolds. We compare three methods for their effects on the biomechanical properties on electrospun scaffolds of poly lactic-co-glycolic acid (PLGA). Imaging of cells on scaffolds and assessment of production of extracellular matrix (ECM) proteins by cells on scaffolds is described. Culturing cells on scaffolds in vitro can improve scaffold strength and elasticity but the tissue engineering literature shows that cells often fail to produce appropriate ECM when cultured under static conditions. There are few commercial systems available that allow one to culture cells on scaffolds under dynamic conditioning regimes--one example is the Bose Electroforce 3100 which can be used to exert a conditioning programme on cells in scaffolds held using mechanical grips within a media filled chamber.(4) An approach to a budget cell culture bioreactor for controlled distortion in 2 dimensions is described. We show that cells can be induced to produce elastin under these conditions. Finally assessment of the biomechanical properties of processed scaffolds cultured with or without cells is described.

Research on the Electrospun Foaming Process to Fabricate Three‐dimensional Tissue Engineering Scaffolds

Fabrication of Electrospun Nanofibrous Scaffolds with 3D Controllable Geometric Shapes

Recent Advancements on Three-Dimensional Electrospun Nanofiber Scaffolds for Tissue Engineering

Gas Foaming Of Electrospun Poly(L-Lactide-Co-Caprolactone)/Silk Fibroin Nanofiber Scaffolds To Promote Cellular Infiltration And Tissue Regeneration

Fabrication of Heterogeneous Scaffolds Using Melt Electrospinning Writing: Design and Optimization

Fabrication of a novel Three-Dimensional porous PCL/PLA tissue engineering scaffold with high connectivity for endothelial cell migration

A Novel Electrospinning Setup for the Fabrication of Thickness-Controllable 3D Scaffolds with an Ordered Nanofibrous Structure

Advanced Fabrication for Electrospun Three-Dimensional Nanofiber Aerogels and Scaffolds.

Fabrication Of Tissue Engineering Scaffolds By Electrospinning Techniques

Fabrication and Characterization of Three-Dimensional Poly(ε-caprolactone) Bilayer Scaffolds for Skin Regeneration

Three-dimensional tissue engineering scaffolds with electrospinning technique：application and prospects

3D Electrospun Nanofiber-Based Scaffolds: from Preparations and Properties to Tissue Regeneration Applications

Novel class of collector in electrospinning device for the fabrication of 3D nanofibrous structure for large defect load-bearing tissue engineering application

Electrospun Three-Dimensional Aligned Nanofibrous Scaffolds for Tissue Engineering

Fabrication of poly (ϵ-caprolactone) microfiber scaffolds with varying topography and mechanical properties for stem cell-based tissue engineering applications

Novel Airflow-Field-Driven Melt Spinning 3D Printing of Tubular Scaffolds Based on Polycaprolactone Blends

Postproduction Processing of Electrospun Fibres for Tissue Engineering

Electrospinning nanofibers to 1D, 2D, and 3D scaffolds and their biomedical applications

Fabrication of Three-Dimensional Poly(ε-Caprolactone) Scaffolds with Hierarchical Pore Structures for Tissue Engineering

Controlling Mechanical Properties of Medical-Grade Scaffolds through Electrospinning Parameter Selection

Silk Scaffolds with Gradient Pore Structure and Improved Cell Infiltration Performance.