Conductive Fullerene Surfactants Via Anion Doping As Cathode Interlayers for Efficient Organic and Perovskite Solar Cells

Kangrong Yan,Zhi-Xi Liu,Xue Li,Jiehuan Chen,Hongzheng Chen,Chang-Zhi Li

DOI: https://doi.org/10.1039/c8qo00788h

IF: 5.456

2018-01-01

Organic Chemistry Frontiers

Abstract:Conductive fullerenes, with mild solution-processing capabilities, are developed as electron transporting materials for efficient organic and perovskite solar cells.

What problem does this paper attempt to address?

Effective Interfacial Layer to Enhance Efficiency of Polymer Solar Cells Via Solution-Processed Fullerene-Surfactants

Chang-Zhi Li,Chu-Chen Chueh,Hin-Lap Yip,Kevin M. O'Malley,Wen-Chang Chen,Alex K. -Y. Jen

DOI: https://doi.org/10.1039/c2jm30755c

2012-01-01

Journal of Materials Chemistry

Abstract:Two methanol-soluble fullerene surfactants have been developed as interfacial layers for cathodes in polymer solar cells. These surfactants facilitate the tuning of cathode work function and extraction of electrons that significantly enhance open-circuit voltage and photocurrent generation. The performance of bulk heterojunction solar cells based on using these surfactant-modified cathodes improved significantly to afford high power conversion efficiencies (as high as 6.63% for a Ag cathode).
Doping of fullerenes via anion-induced electron transfer and its implication for surfactant facilitated high performance polymer solar cells.

Chang-Zhi Li,Chu-Chen Chueh,Feizhi Ding,Hin-Lap Yip,Po-Wei Liang,Xiaosong Li,Alex K-Y Jen

DOI: https://doi.org/10.1002/adma.201300580

IF: 29.4

2013-01-01

Advanced Materials

Abstract:Simple and solution-processible tetrabutyl-ammonium salts (TBAX) can dope fullerene and its derivatives to achieve conductive thin films (σ as high as 0.56 S/m). The electron transfer between the anions of TBAXs and n-type semiconductors induces doping without encountering any harsh activation. These provide valid support for the surfactant interfacial doping of fullerene in polymer solar cells for enhanced device performance.
[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Menglan Lv,Ming Lei,Jin Zhu,Tadahiko Hirai,Xiwen Chen

DOI: https://doi.org/10.1021/am5007047

IF: 9.5

2014-01-01

ACS Applied Materials & Interfaces

Abstract:An amine-based, alcohol-soluble fullerene [6,6]-phenyl-C61-butyric acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl ester (PCBDAN) with 4-fold electron mobility of 6,6-phenyl-C61-butyric acid methyl ester (PCBM) is applied successfully as an acceptor and cathode interfacial material in polymer solar cells ITO/P3HT:PCBDAN/MoO3/Ag, where indium tin oxide (ITO) alone is used as the cathode and poly(3-hexylthiophene) (P3HT) is used as a donor. The X-ray photoelectron spectroscopy (XPS) depth profile confirming a favorable vertical phase separation is formed where P3HT is rich at the air/active blend interface and PCBDAN is rich at the buried interface with ITO and, thus, reduces the work function of ITO for use as the cathode. A moderate power conversion efficiency (PCE) of 3.1% is achieved. The slightly low PCE could be due to unoptimized morphology and low structure ordering of P3HT in the blends. However, this result demonstrates that the amine-based fullerene could be used as the acceptor and cathode interfacial material, which eliminated the multilayer device fabrication process. Because PCBDAN has high electron mobility, it would have potential applications in nano-structured organic solar cells. In the near future, alcohol-processable, high-efficient organic/polymer solar cells can be anticipated.
Crown-Ether Functionalized Fullerene As A Solution-Processable Cathode Buffer Layer For High Performance Perovskite And Polymer Solar Cells

Xiaodong Liu,Weixiang Jiao,Ming Lei,Yi Zhou,Bo Song,Yongfang Li

DOI: https://doi.org/10.1039/c5ta01277e

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:An alcohol-soluble fullerene derivative functionalized with a crown-ether end group in its side chain (denoted as PCBC) was synthesized and applied as a cathode buffer layer in planar p-i-n perovskite solar cells and bulk-heterojunction polymer solar cells. It is found that the introduction of the PCBC cathode buffer layer can greatly improve the photovoltaic performance of the planar p-i-n perovskite solar cells based on CH3NH3PbI3-xClx with power conversion efficiency (PCE) reaching 15.08%. In addition, the bulk-heterojunction polymer solar cells based on PBDTTT-C-T:PC70BM with the PCBC cathode buffer layer also showed a higher PCE of 7.67%, which is improved in comparison with the traditional device with the Ca/Al cathode. This work indicates that PCBC is a promising solution-processable cathode buffer layer material for application in both planar p-i-n perovskite solar cells and bulk-heterojunction polymer solar cells.
Solution-Processable Conductive Organics Via Anion-Induced N-Doping And Their Applications In Organic And Perovskite Solar Cells

Kangrong Yan,Chang-Zhi Li

DOI: https://doi.org/10.1002/macp.201900084

IF: 2.996

2019-01-01

Macromolecular Chemistry and Physics

Abstract:The essential challenge for accessing high-performance organic optoelectronics strongly relies on how to enable organic materials with high charge transport capabilities. This short review gives an elucidation of the mild n-doping that occurs between Lewis base anions and n-semiconductors, as well as their extension to develop solution-processable conductive interlayers for organic and perovskite solar cells.
Engineering of Electron Extraction and Defect Passivation Via Anion-Doped Conductive Fullerene Derivatives As Interlayers for Efficient Invert Perovskite Solar Cells.

Tian Zheng,Lisheng Fan,Hang Zhou,Yang Zhao,Bo Jin,Rufang Peng

DOI: https://doi.org/10.1021/acsami.0c04315

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:The major limitation of organic-inorganic perovskite solar cell performance is the existence of numerous charged defects at the absorption layer surface, which caused the charge carrier to recombine depravation. These defects have a remarkable influence on charge extraction, which further caused the instability of the device and induced severe hysteresis. Here, three low-cost anion-doped conductive fullerene derivatives, fullerene bis(phenethyl alcohol) malonate (FMPE-I), fullerene bis(ethylenediamine) malonamide (FEDA-I), and fullerene bis(propanediamine) malonamide (FPDA-I), are developed for the first time as interfacial layers between perovskite and phenyl-C-61 -butyric acid methyl ester (PCBM) in planar invert perovskite solar cells by mild solution fabrication. The constituent Lewis basic halides and the specific amide groups of conductive fullerene derivatives efficaciously heighten the chemical interaction between perovskite and conductive fullerene derivatives since the iodide can combine with undercoordinated Pb2+ by electrostatic interaction and the amide group can facilely be combined with I by hydrogen bonding, improving the dual passivation of perovskite defects. Moreover, due to the well-matched energy level of conductive fullerene derivatives and the high conductivity of the perovskite/interlayer film, the electron extraction capacity can be effectively enhanced. Consequently, superior optoelectronic properties are achieved with an improved power conversion efficiency of 17.63%, which is considerably higher than that of the bare PCBM-based devices (14.96%), for the perovskite device with conductive interlayer treatment along with negligible hysteresis. Moreover, hydrophobic conductive fullerene derivatives improve the resistance of the device to moisture. The conductive fullerene derivative-based devices without encapsulation are maintained at 85% of the pristine power conversion efficiency value after storage under ambient conditions (25 degrees C temperature, 60% humidity) for 500 h.
Highly Efficient Fullerene/perovskite Planar Heterojunction Solar Cells Via Cathode Modification with an Amino-Functionalized Polymer Interlayer

Qifan Xue,Zhicheng Hu,Jiang Liu,Jiahui Lin,Chen Sun,Ziming Chen,Chunhui Duan,Jing Wang,Cheng Liao,Woon Ming Lau,Fei Huang,Hin-Lap Yip,Yong Cao

DOI: https://doi.org/10.1039/c4ta05352d

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:A new amino-functionalized polymer, PN4N, was developed and applied as an efficient interlayer to improve the cathode interface of fullerene/perovskite (CH3NH3PbIxCl3−x) planar heterojunction solar cells.
In Situ Doping and Crosslinking of Fullerenes to Form Efficient and Robust Electron-Transporting Layers for Polymer Solar Cells

Namchul Cho,Chang-Zhi Li,Hin-Lap Yip,Alex K. -Y. Jen

DOI: https://doi.org/10.1039/c3ee42509f

IF: 32.5

2014-01-01

Energy & Environmental Science

Abstract:Efficient electron-transporting layers (ETLs) with a stable conductive fullerene doped into a thermally crosslinkable fullerene matrix have been developed for inverted polymer solar cells (PSCs). The improved electrical conductivity and solvent resistance of these ETLs have significantly enhanced the performance of PSCs.
Self-assembly of Highly Conductive Self-N-doped Fullerene Ammonium Halides and Their Application in Thein Situsolution-Processable Fabrication of Working Electrodes for Alcohol Electrooxidation

H. H. Wang,X. Sun,Z. C. Lin,Z. F. Pang,X. Q. Kong,M. Lei,Y. F. Li

DOI: https://doi.org/10.1039/c8ra00100f

IF: 4.036

2018-01-01

RSC Advances

Abstract:Stable and highly conductive self-n-doped fullerene ammonium halides are promising optoelectronic materials. It is necessary to thoroughly understand their structure-function relationship and to develop their applications. Here, the assembly behaviors of the self-n-doped fullerene ammonium halides, as well as the functional areas in the well-developed 2D-3D lamellar structures in their ordered aggregates are systematically characterized using comprehensive methods. In the self-assembly, the solvation effect of DMSO promotes the flexibility of side-chains and drives the formation of fullerene ammonium halides into ordered bilayer structures. The conductivity-active area, which contains tightly packed halide anions sandwiched between fullerenes, provides good electron transfer property. Remarkably, residual DMSO in the side-chain area can induce aqueous Pd precursor into the highly conductive framework. After reduction, Pd nanoparticles are immobilized in the confined spaces within the conductive support. The resulting electrode can be used to electrooxidize ethanol. This study provides a facile solution strategy for the in situ fabrication of electrocatalysts on working electrodes, which can be applied in direct alcohol fuel cells.
Designing Conductive Fullerenes Ionene Polymers As Efficient Cathode Interlayer to Improve Inverted Perovskite Solar Cells Efficiency and Stability

Tian Zheng,Hang Zhou,Bin Fan,Yang Zhao,Bo Jin,Lisheng Fan,Rufang Peng

DOI: https://doi.org/10.1016/j.cej.2021.128816

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Unsatisfactory interface contacts and energy level barrier between adjacent interlayers are important issues that hinder the improvement of the perovskite solar cells (PSCs). A novel and efficient conducting cathode interlayer for PSCs is synthesized in this work by combining ionene polymer with pendent fullerene. This novel n-doping fullerene ionene polymer (C-60-MPE-ionene) is developed as a cathode interlayer to enhance interface contact, tune work function of metal cathode and reduce energy level barrier. Due to the introduction of fullerene to the side chain remarkably improves conductivity of ionene polymers, the high efficiency devices can be obtained by depressing charge accumulation at the cathode/electron transfer layer (ETL) interface. Hence, the device based on C-60-MPE-ionene as cathode interlayer achieves a high efficiency of 19.28%, which is significantly higher than the finding of control devices (15.60%). Moreover, hydrophobic conductive fullerene ionene polymers dram-astically enhance the resistance of perovskite films to moisture. Our study shows the promising potentials of fullerene ionene polymers as the cathode interlayer in PSCs and provides new insights into the development of new cathode modification materials in the future.
Water-soluble anionic polymer electrolytes based on polyfluorene as the universal interlayer for organic solar cells

Rahmatia Fitri Binti Nasrun,Dong Hwan Son,Joo Hyun Kim

DOI: https://doi.org/10.1007/s13233-024-00329-8

IF: 2.127

2024-10-25

Macromolecular Research

Abstract:Conjugated polymers derived from polyfluorene and featuring sulfonate groups in their side chains were synthesized for interlayer in both fullerene and non-fullerene organic solar cells (OSCs). These polymers, specifically denoted as PFS-T-x (x = H, Li), establish an advantageous interfacial dipole through the ionic functionality located at the side chains. Remarkably, the key parameters of organic solar cells, such as and exhibit improvements as the size of the cation increases. The highest power conversion efficiency (PCE) was achieved using PFS-T-Li as interlayer, reaching up to 9.11% and 16.3% for the device based on fullerene and non-fullerene, respectively. This study can provide a deeper understanding and potential enhancements in the performance of OSCs utilizing polymers as universal interlayers. Graphic abstract This study explored the impact of different countercations in conjugated polymers used as an interlayer in organic solar cells. It was discovered that the conjugated polyelectrolyte containing lithium countercations produced the highest power conversion efficiency, ascribed to the creation of an advantageous interfacial dipole.

polymer science
Cross Self-N-Doping and Electron Transfer Model in A Stable and Highly Conductive Fullerene Ammonium Iodide: A Promising Cathode Interlayer in Organic Solar Cells

Weiwei Chen,Weixiang Jiao,Debing Li,Xuan Sun,Xia Guo,Ming Lei,Qi Wang,Yongfang Li

DOI: https://doi.org/10.1021/acs.chemmater.6b00214

IF: 10.508

2016-01-01

Chemistry of Materials

Abstract:Self-n-doped stable and highly conductive fullerene ammoniums with excellent thickness-tolerance could act as promising cathode interlayers to facilitate electron transfer and improve power conversion efficiencies (PCEs) of large-area organic solar cells (OSCs). Herein, systematic studies on electronic and spatial structure of fullerene ammonium iodide (PCBANI) have been performed to elucidate the cross self-n-doping mechanism. In PCBANI, partial electron transfer from iodide to the core fullerene could result in n-doping and high conductivity. This doping process forms strong anion-pi interactions between iodides and fullerene cores accompanied by side-chain's head-to-tail cation-pi interactions that contribute to the stabilization of the n-doped fullerene. Moreover, two possible pathways of the cross self-n-doping involving intermolecular exchange and transfer of iodide have been verified by experiment combined with computational modeling. Based on all of the solid evidence, we propose an electron transfer model for PCBANI in which the iodide sandwiched in the n-doped fullerene core acts as a shuttle to transfer electrons via redox processes. This finding provides a strategy for electrically doping and assembling fullerenes to improve their performance in photovoltaic devices and endow them with new functionalities that could be applied to optoelectronics and organic electronics.
Designing Thickness-Insensitive Cathode Interlayers via Constructing Noncovalently Conformational Locks for Highly Efficient Non-fullerene Organic Solar Cells

Haolan Zheng,Lin Hu,Xiaotian Hu,Hongxiang Li,Jianwei Quan,Yingzhi Jin,Xinxing Yin,Jiaxing Song,zhen Su,Dan Zhou,Zaifang Li

DOI: https://doi.org/10.1039/d3ta07050f

IF: 11.9

2023-12-19

Journal of Materials Chemistry A

Abstract:Two novel water/alcohol-soluble conjugated polyelectrolytes, PF-TT and PF-BDT, have been designed and synthesized as cathode interlayer (CIL) for highly efficient non-fullerene organic solar cells (OSCs). They both have superior charge transfer/transport capability owning to the intramolecular noncovalently conformational locks (NoCLs) formed through S...H bonds between fluorene and thienothiophene (TT) or benzodithiophene (BDT) units along the polymer backbone. The intramolecular NoCLs make the molecular packing more compact and ordered. These beneficial effects to molecular conformation and stacking, as well as their preferable face-on orientation significantly reduce the electrical transport resistance. They can also reduce the work-function of a series of conducting materials (e.g., ITO, Ag and PEDOT:PSS) by generating strong interfacial dipoles through the pendant pyridine groups. Therefore, high power conversion efficiencies (PCEs) of 16.27%/17.83% and 17.09%/18.47% are obtained in PM6:Y6/PM6:BTP-eC9-based non-fullerene OSC devices when PF-TT and PF-BDT are used as the CILs. Moreover, device performances are quite tolerant to the thickness of the CILs. A prominent PCE value of 15.31% is still attained with a thickness of 53 nm for the PF-BDT layer. This PCE value stands out as one of the highest reported so far for organic CIL with thickness surpassing 50 nm.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Synchronous Doping Effects of Cathode Interlayers on Efficient Organic Solar Cells

Zhihui Chen,Yifan Huang,Jiaxin Gao,Lei Zhang,Zaifei Ma,Miao Liu,Todd Emrick,Yao Liu

DOI: https://doi.org/10.1021/acsenergylett.2c02153

IF: 22

2022-10-21

ACS Energy Letters

Abstract:An in-depth understanding of the role of cathode interlayers in nonfullerene organic solar cells (OSCs) is challenging due to ambiguous and complicated interfacial doping, which complicates molecular designs and hinders progress in optoelectronic performance. Herein, we describe synchronous doping effects (a combination of the cathode interlayer’s self-doping and its doping on acceptors in the active layer) of cathode interlayers. The electronic nature of π-conjugated cores in cathode interlayer materials has a negligible influence on nonfullerene acceptor doping but an obvious influence on their self-doping. A synchronous doping effect generated by the amine-substituted fullerene (C60-N), with its electron-withdrawing C60 core, facilitates interfacial charge transport and collection, affording a remarkable power conversion efficiency > 18% for PM6:L8-BO based OSCs, which is among the highest reported values for binary OSCs. This discovery of synchronous doping on interfacial modification provides new and useful molecular design guidelines for high-performance cathode modifiers in organic electronics.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Design and Synthesis of an Amino-Functionalized Non-Fullerene Acceptor As a Cathode Interfacial Layer for Polymer Solar Cells

Peng Luo,Kang An,Lei Ying,Guanze Li,Chunguang Zhu,Baobing Fan,Fei Huang,Yong Cao

DOI: https://doi.org/10.1039/d0tc00435a

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:A non-fullerene acceptor with amino groups can be used as a cathode interlayer to enhance the photovoltaic performance.
Functionalization of Fullerene Materials Toward Applications in Perovskite Solar Cells

Lingbo Jia,Muqing Chen,Shangfeng Yang

DOI: https://doi.org/10.1039/d0qm00295j

IF: 8.6834

2020-01-01

Materials Chemistry Frontiers

Abstract:This review summarizes the recent progress of fullerene derivatives applied in perovskite solar cells, unveiling the correlation between the chemical structures of fullerene derivatives, especially the addend groups, and their performance.
Fullerene-Anchored Core-Shell ZnO Nanoparticles for Efficient and Stable Dual-Sensitized Perovskite Solar Cells

Kai Yao,Shifeng Leng,Zhiliang Liu,Linfeng Fei,Yongjian Chen,Sibo Li,Naigeng Zhou,Jie Zhang,Yun-Xiang Xu,Lang Zhou,Haitao Huang,Alex K. -Y. Jen

DOI: https://doi.org/10.1016/j.joule.2018.10.018

IF: 46.048

2019-01-01

Joule

Abstract:Among all the solutions to improve long-term stability of perovskite solar cells, p-i-n heterojunction with all-metal-oxide charge transporting layers show their attractive features. However, these devices require an efficient electron-transporting layer (ETL) fabricated on top of the perovskites in which the commonly used oxide nanocrystals are limited by their imperfect surface. Here, a novel surface-passivation strategy was adopted by anchoring ZnO nanoparticles with fullerene nano-shells (Fa-ZnO) to mitigate trap states and passivate surface hydroxyl groups. We evidence the Fa-ZnO can be easily processed on top of perovskite as a high-quality ETL that improves electron extraction efficiency and suppresses ion diffusion/moisture penetration. In addition, the presence of fullerene shells allows Fa-ZnO nanoparticles to penetrate into perovskite precursors before crystallization, resulting in n-type sensitized configuration. With mesoscopic NiOx as hole-collecting contact, the p-n dual sensitization configuration has enabled all-metal-oxide devices to achieve state-of-the-art efficiencies of 21.1% with greatly improved performance longevity.
Block copolymers as efficient cathode interlayer materials for organic solar cells

Dingqin Hu,Jiehao Fu,Shanshan Chen,Jun Li,Qianguang Yang,Jie Gao,Hua Tang,Zhipeng Kan,Tainan Duan,Shirong Lu,Kuan Sun,Zeyun Xiao

DOI: https://doi.org/10.1007/s11705-020-2010-1

IF: 4.803

2021-01-25

Frontiers of Chemical Science and Engineering

Abstract:<p class="a-plus-plus">Emerging needs for the large-scale industrialization of organic solar cells require high performance cathode interlayers to facilitate the charge extraction from organic semiconductors. In addition to improving the efficiency, stability and processability issues are major challenges. Herein, we design block copolymers with well controlled chemical composition and molecular weight for cathode interlayer applications. The block copolymer coated cathodes display high optical transmittance and low work function. Conductivity studies reveal that the block copolymer thin film has abundant conductive channels and excellent longitudinal electron conductivity due to the interpenetrating networks formed by the polymer blocks. Applications of the cathode interlayers in organic solar cells provide higher power conversion efficiency and better stability compared to the most widely-applied ZnO counterparts. Furthermore, no post-treatment is needed which enables excellent processability of the block copolymer based cathode interlayer.</p>

engineering, chemical
Solution-Processible Conductive Organics For Efficient Polymer And Perovskite Solar Cells

Chang-Zhi Li

DOI: https://doi.org/10.1109/PIERS.2016.7734779

2016-01-01

Abstract:Thin-film solar cells made with polymer and perovskite absorbers represent a transformative technology with great potentials for high-throughput manufacturing at very low cost. Efforts in the design, processing, and engineering of π-conjugated molecule and polymers have enabled significantly enhanced performance and stability of such organic and hybrid electronic devices, through which the light-harvest, exciton dissociation, charge transport, and charge collection at the metal/absorber/metal oxide interfaces can be controlled and tuned [1, 2]. In this talk, the integrative molecular engineering approach conducted in group of combining interface [3], active material [4], and transparent electrode [5, 6] to improve the performance and stability of polymer and hybrid perovskite photovoltaic cells will be discussed. Specific emphasis will be placed on the development of solution-processible conductive organics via a mild n-doping process and their application for interface engineering between semiconductor and electrode interface for developing high-performance and flexible polymer and perovskite hybrid solar cells [8, 9].
Double-Cable Conjugated Polymers with Fullerene Pendant for Single-Component Organic Solar Cells

Liu Bai-Qiao,Xu Yun-Hua,Liu Feng,Xie Cheng-Cheng,Liang Shi-Jie,Chen Qiao-Mei,Li Wei-Wei

DOI: https://doi.org/10.1007/s10118-022-2732-2

2022-01-01

Chinese Journal of Polymer Science

Abstract:In this work, the “functionalization-polymerization”(FP) method has been used to construct fullerene-contained double-cable conjugated polymers with “donor-acceptor” backbones. It was realized via synthesizing a fullerene-contained monomer and performing Stille polymerization. With this method, a series of double-cable conjugated polymers with different fullerene contents were developed and applied into single-component organic solar cells. The power conversion efficiencies(PCEs) based on these polymers increased from 0.71% to 1.71% with the enhanced fullerene contents. The relatively low PCEs might be originated from the poor microstructure in these polymers. These new conjugated polymers with molecular heterojunction would show potential application in organic electronic devices.

Conductive Fullerene Surfactants Via Anion Doping As Cathode Interlayers for Efficient Organic and Perovskite Solar Cells

Effective Interfacial Layer to Enhance Efficiency of Polymer Solar Cells Via Solution-Processed Fullerene-Surfactants

Doping of fullerenes via anion-induced electron transfer and its implication for surfactant facilitated high performance polymer solar cells.

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Crown-Ether Functionalized Fullerene As A Solution-Processable Cathode Buffer Layer For High Performance Perovskite And Polymer Solar Cells

Solution-Processable Conductive Organics Via Anion-Induced N-Doping And Their Applications In Organic And Perovskite Solar Cells

Engineering of Electron Extraction and Defect Passivation Via Anion-Doped Conductive Fullerene Derivatives As Interlayers for Efficient Invert Perovskite Solar Cells.

Highly Efficient Fullerene/perovskite Planar Heterojunction Solar Cells Via Cathode Modification with an Amino-Functionalized Polymer Interlayer

In Situ Doping and Crosslinking of Fullerenes to Form Efficient and Robust Electron-Transporting Layers for Polymer Solar Cells

Self-assembly of Highly Conductive Self-N-doped Fullerene Ammonium Halides and Their Application in Thein Situsolution-Processable Fabrication of Working Electrodes for Alcohol Electrooxidation

Designing Conductive Fullerenes Ionene Polymers As Efficient Cathode Interlayer to Improve Inverted Perovskite Solar Cells Efficiency and Stability

Water-soluble anionic polymer electrolytes based on polyfluorene as the universal interlayer for organic solar cells

Cross Self-N-Doping and Electron Transfer Model in A Stable and Highly Conductive Fullerene Ammonium Iodide: A Promising Cathode Interlayer in Organic Solar Cells

Designing Thickness-Insensitive Cathode Interlayers via Constructing Noncovalently Conformational Locks for Highly Efficient Non-fullerene Organic Solar Cells

Synchronous Doping Effects of Cathode Interlayers on Efficient Organic Solar Cells

Design and Synthesis of an Amino-Functionalized Non-Fullerene Acceptor As a Cathode Interfacial Layer for Polymer Solar Cells

Functionalization of Fullerene Materials Toward Applications in Perovskite Solar Cells

Fullerene-Anchored Core-Shell ZnO Nanoparticles for Efficient and Stable Dual-Sensitized Perovskite Solar Cells

Block copolymers as efficient cathode interlayer materials for organic solar cells

Solution-Processible Conductive Organics For Efficient Polymer And Perovskite Solar Cells

Double-Cable Conjugated Polymers with Fullerene Pendant for Single-Component Organic Solar Cells