Abstract:Reducing the weight of floor beams is a promising way to carry out the lightweight design of the rack car body. However, the reduction will generally amplify the vibration of the car body chassis transmitted to the floor and cause a decrease in riding comfort. Moreover, the lightweight design of the rack floor beams still depends on engineer's experiences. To address the issues, a cross-section layout method combing bionic with multi-objective topology optimization was proposed. According to the method, a novel bionic layout of rack floor beams offering out-standing reducing weight, vibration performance, in which the configuration elements of bionic quasi-ellipses replaced traditional straight lines in their cross-sections, was proposed. Firstly, a finite element modeling under multiple load cases for rack floor beams was built. Secondly, we screened an optimal load path using a multi-objective topology optimization method considering modal factors, and then constructed a novel bionic layout of cross-sections from beetles. Subsequently, considering minimizing the total mass (M) while maximizing the first-order vertical bending modal frequency (FVBMF) as two optimization objectives, a surrogate-based multi-objective genetic algorithm (SMOGA) and the technique for order of preference by similarity to ideal solution (TOPSIS) were then utilized in sequence to construct the surrogate models, solve optimization process for geometrical parameters of the cross-section, and identify the best trade-off design. Moreover, the multi-objective geometrical parameter optimization under multiple load cases were investigated. The results show that the parameter tt has a more significant influence on the mass and modality of floor beams, and the parameter should be less than 80 mm under single load cases (SLCs). Finally, the dynamic and static performance comparison of the proposed cross-section with the traditional cross-section were also performed. The weight of the optimum outcomes is reduced by 13.25 and the 1-order vertical natural frequency is significantly increased by 48.04 . The results show that the proposed floor beams have significant modal performance and better weight reduction.

A Lightweight Method of Thin-Walled Beams Based on Cross-Sectional Characteristic

Lightweight design of aircraft truss based on topology and size optimization

Multi-parameter similarity model-based lightweight design of battery electric vehicle body-in-white

Variable Cross-Section Rectangular Beam and Sensitivity Analysis for Lightweight Design of Bus Frame

Study on Lightweight of Vehicle Body Structure Based on Implicit Parametric Model

A new cross-section layout method and geometrical parameter optimization for floor beams of rack car body considering modal factors

Topology optimization of thin-walled cross section using moving morphable components approach

A data-driven procedure for one-dimensional dynamic analysis of thin-walled beams with arbitrary cross-sections

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Optimized Lightweight Frame for Intelligent New-energy Vehicles

Optimal design of automotive body B-pillar using simplified finite element model of body-in-prime combined with an optimization procedure

Cross-section parameterisation and optimisation of double-hat beams under dynamic three-point bending

Research on Mechanical Engineering with Lightweight Design for a Car Body Frame

Carbody structural lightweighting based on implicit parameterized model

Analysis and optimization of pre-stressed modal features of ship anchor support parts

Topology optimization-based lightweight design of a certain tubular beam subframe

Lightweight design of multi-material body structure based on material selection method and implicit parametric modeling

A performance-driven lightweight optimization method for material-structure coupling design of cab

Cross-section optimization of vehicle body through multi-objective intelligence adaptive optimization algorithm

Optimized Design of Lightweight Structure with Spare Wheel Fixed below Rear Floor

Integrated lightweight optimization design of wall thickness, material, and performance of automobile body side structure