Abstract:We propose and demonstrate a four-wavelength-switchable erbium-doped fiber laser (4WS-EDFL) with a four-channel superimposed high-birefringence fiber Bragg grating (SI-HBFBG) and a dual-coupler ring based compound-cavity (DCR-CC) filter. Both for the first time, a SI-HBFBG as a four-channel reflective filter is used in a multi-wavelength switchable fiber laser to define wavelength channels and a DCR-CC filter is used to select a single mode from dense longitudinal-modes in a fiber laser. We present in detail how to design, fabricate, and characterize the DCR-CC filter with both theoretical analysis and experimental results, which we believe is the first systematic approach for making a compound-cavity based filter used for selecting single-longitudinal mode (SLM) in a fiber laser. The enhanced polarization hole burning effect in a 2.9 m long erbium-doped fiber, coiled inside a three-loop polarization controller, and the polarization-mismatch-induced losses are introduced into the laser cavity to achieve wavelength-switching operations. We show that the 4WS-EDFL can be switched among fifteen lasing states, including four single-wavelength operations, six dual-wavelength operations, four three-wavelength operations and one four-wavelength operation, all with high stability. For demonstration, in switchable single-wavelength operations, the four SLM lasing outputs measured are all with an optical signal to noise ratio of >80 dB, a linewidth of <700 Hz, a relative intensity noise of ≤-156.7 dB/Hz at frequencies over 3 MHz, an output power fluctuation of ≤0.555 dB and excellent polarization characteristics.

Passive, Stable and Order-Adjustable SBS Q-Switching Fiber Laser

Robust Q-switching based on stimulated Brillouin scattering assisted by Fabry-Perot interference.

Tunable Q-switched Fiber Laser Based on Stimulated Brillouin Scattering and Pulse Pumping

Study on Stimulated Brillouin Scattering Pulse Waveform

Q-switching pulse generation in multi-wavelength Brillouin Erbium-doped Fiber laser

Experimental Investigation of Broadband Laser′s SBS Based on Frequency-Band-Dispersing Method

Dual-wavelength Passively Q-Switched Single-Frequency Fiber Laser.

Stable Actively Q-switched Single-Frequency Fiber Laser at 15 Μm Based on Self-Injecting Polarization Modulation

Four-wavelength-switchable SLM fiber laser with sub-kHz linewidth using superimposed high-birefringence FBG and dual-coupler ring based compound-cavity filter

Stimulated Brillouin scattering (SBS) excited with a phase-modulated pump laser

Multi-Wavelength, Passively Q-Switched, Single-Frequency Fiber Laser

Single-frequency Brillouin lasing based on a birefringent fiber Fabry–Pérot cavity

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation

Switchable multi-wavelength and dual-scale soliton fiber laser incorporating cascaded chirped fiber Bragg gratings

Switchable Multiwavelength Erbium-Doped Fiber Laser with Cascaded Fiber Bragg Gratings and Dual-Section Lyot–Sagnac Filter

A 2 kW, 8 GHz-Linewidth Yb-Doped Polarization-Maintained Fiber Laser with Quasi-Flat-Top Pseudo Random Binary Sequence Phase Modulation for SBS Suppression

Passively Q-switched and mode-locking fiber laser based on Sb2S3 saturable absorber

Stimulated Brillouin Scattering Phenomena in A Nanosecond Linearly Polarized Yb-Doped Double-Clad Fiber Amplifier

Frequency Spacing Switchable Multiwavelength Brillouin Erbium Fiber Laser Utilizing Cascaded Brillouin Gain Fibers.

Laser Pulsewidth Control by Two-Cell Stimulated Brillouin Scattering

Actively-Controllable Passively Q-Switched Laser