Abstract:For the battery- or USB-powered portable smart devices, which supply their computing cores with a wide-range sub-volt rail, the energy-efficient high and wide voltage-conversion-ratio (VCR) converters are crucially important. In addition, low form factor and decent transient responses are also favorable for such applications. Prior state-of-the-art designs either use single-stage hybrid designs using multi-level or Dickson converters [1 – 3], or adopt two-stage cascaded architectures with a highly efficient unregulated front (or rear) stage [4], as shown in Fig. 18.6.1 (left). The multi-level designs, which conduct the full inductor current through all the on-state switches, are suited to low-to-medium power levels with limited current density. The Dickson converters take advantage of a high conversion ratio, however, at the cost of reduced output voltage range. The two-stage designs which show decent output range and efficiency, however, can suffer from heavy load efficiency degradation considering that the efficiency of both stages degrade with increasing load and the overall efficiency which is the product of the efficiencies of the two stages is severely degraded. Inspired by the inductive-sigma converter [5] which shunts a highly efficient unregulated LLC with a regulated Buck, this work proposes a reconfigurable capacitive-sigma converter. By input-series and output-shunting a highly efficient unregulated switched-capacitor (SC) converter with a reconfigurable Dickson hybrid Buck stage, the power stage input current is reused and output currents are combined. Therefore, the overall efficiency is greatly improved in a wide continuous VCR range and with an enhanced loading capacity. Besides, as will be demonstrated, the proposed design shows inherently decent load transient and regulation performances.

Dual-Voltage-Rectifier-Based Single-Phase AC–DC Converters with Dual DC Bus and Voltage-Sigma Architecture for Variable DC Output Applications

Single-Phase AC-DC Converter With Dual-Output Rectifier, Dual-Input DC Transformer, and Voltage-Split/Sigma Principle

Design and Implementation of an Accurately Regulated Multiple Output ZVS DC–DC Converter

Accurately regulated multiple output ZVS DC-DC converter

An LLC -DAB Bidirectional DCX Converter with Wide Load Range ZVS and Reduced Switch Count

1 MHz 48–12 V Regulated DCX with Single Transformer

Control and Modulation of a Single-Phase AC/DC Converter with Smooth Bidirectional Mode Switching and Symmetrical Decoupling Voltage Compensation

High-Efficiency High-Density RDCX Modules Cascaded with CHB PFC Stage

Advanced Symmetrical Voltage Quadrupler Rectifiers for High Step-Up and High Output-Voltage Converters

A Novel Modular Sigma DC/DC Converter with a Wide Input Voltage Range

A High Step-Down Multiple Output Converter with Wide Input Voltage Range Based on Quasi Two-Stage Architecture and Dual-Output LLC Resonant Converter

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

Modular High Efficiency High Density MHz DCX with Different Output Voltage Adaptation

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

A 5V Input 98.4% Peak Efficiency Reconfigurable Capacitive-Sigma Converter with Greater Than 90% Peak Efficiency for the Entire 0.4~1.2V Output Range.

A MHz Regulated DC Transformer with Wide Voltage Range

High-Efficiency High-Density MHz Cellular DC/DC Converter for On-Board Charger

Dual Transformer Based Current-Fed Bidirectional DC-DC Converter with Wide Operating Range

Extra wide input voltage range and high efficiency DC-DC converter using hybrid modulation

Dual‐output AC–DC Converter with Three‐port Bridgeless PFC and Non‐isolated DCX

A novel dual-leg DC-DC converter for wide range DC-AC conversion