Abstract:Cold spray additive manufacturing presents a rapid solution for repairing metallic systems affected by in-service damage. However, the inherent characteristics of the manufacturing process can result in the development of defects such as pores or inclusions, as well as anisotropy within the repaired volume. These factors can adversely affect the mechanical properties of the repaired components. In this study, aluminum 7050 substrates with representative corrosion damage were repaired by cold spray using feedstock powders of similar composition under varied tool pathing strategies. The cold spray repairs were inspected using immersion ultrasound, microhardness testing, and high-resolution electron microscopy. The objective was to assess and characterize defects in the repair and evaluate their impact on local mechanical properties. Analysis of acoustic impedance differences between the repaired volume and substrate served as an indicator of microstructure dissimilarity. Ultrasonic images were processed to evaluate the size and relative fraction of defects in the repair and microhardness testing was used to correlate ultrasonic results with mechanical properties. Certain tool pathing strategies were found to produce defect-free repairs based on ultrasonic examination. Subsequently, these defect-free samples were further analyzed using high-resolution electron microscopy, which revealed the presence of microporosity at length scales below the ultrasonic detection thresholds. While ultrasonic examination proved effective in detecting the size, shape, and depth of defects with millimeter-scale features, traditional destructive techniques remained necessary to characterize defects at the micron scale.

Deformation Microstructures in Individual Cold Sprayed Al-Cu Alloy Particles Studied Via Precession Electron Diffraction and Transmission Kikuchi Diffraction

Visualizing and Quantifying Deformation Microstructures in Cold Sprayed Materials

Interfacial structure between particles in an aluminum deposit produced by cold spray

An experimentally validated dislocation density based computational framework for predicting microstructural evolution in cold spray process

Microstructural Analysis of Gas Atomized Al-Cu Alloy Feedstock Powders for Cold Spray Deposition

Nondestructive Characterization of Multiscale Defects in an Aluminum Alloy After Cold Spray Repair

Development of a material model for predicting extreme deformation and grain refinement during cold spraying

Cold Sprayed Deposits Characterized by Positron Annihilation Spectroscopy

Experimental and Numerical Study of Al2219 Powders Deposition on Al2219-T6 Substrate by Cold Spray: Effects of Spray Angle, Traverse Speed, and Standoff Distance

Uncovering Microstructure Evolution and Dynamic Softening Mechanism of Spray-Deposited AlZnMgCu Alloy Under Thermal Deformation

Nanocrystallization of interfacial microstructure of deformed particles in cold sprayed Ti6Al4V deposits

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Bonding mechanisms in cold spray deposition of gas atomised and solution heat-treated Al 6061 powder by EBSD

Effect of particle oxidation, size and material on deformation, bonding and deposition during cold spray: a peridynamic investigation

Devitrification-Induced Tailoring of Microstructure and Strength in Aluminum High-Entropy Alloy Powder for Cold Spray Deposition

Mechanical Properties and Growth Mechanisms of Long and Small Fatigue Cracks in As-deposited Bulk Cold Spray Al-6061

Using transmission Kikuchi diffraction to characterise α variants in an α + β titanium alloy

3D Ebsd Characterization of Deformation Structures in Commercial Purity Aluminum

Material Perspective and Deformation Pattern of Micro-sized Metallic Particle Using Cold Gas Dynamic Spray

In-situ Study of Microstructural Evolution and Local Strain Distribution During Tensile Loading of Near-Micrometre Grain Size Aluminium

Towards an understanding of particle-scale flaws and microstructure evolution in cold-spray via accumulation of single particle impacts