Abstract:Abstract High-temperature heat pipe is an ideal technical solution for microreactors applied for space missions, planet surface, and the small electricity markets on the ground. However, the internal fluid flow state and the effects of key parameters such as permeability, porosity, and capillary force of wick structure on the distribution of working fluid inside the heat pipe are difficult to measure experimentally. In this study, a general CFD model for heat pipe with wick structure that can predict the thermal behavior at different steady-state conditions was carried out. The thermal conduction through heat pipe shell, liquid film on the inner surface, and the formation of liquid reservoir at the bottom of heat pipe were considered in this model. A high-temperature heat pipe model considering the flow of liquid working fluid inside the wick structure was developed based on the Star-CCM+ numerical simulation software. The model used a combination of the liquid film model and the Volume of Fluid (VOF) model to simulate the effects of fluid flow and collection behavior inside the wick structure on the heat transfer characteristics of the heat pipe. The method included models for flow resistance and capillary driving force under steady-state conditions, centrifugal force and time-varying gravitational field under motion conditions, and mixed convective heat transfer caused by motion conditions. The accuracy of the numerical simulation was validated using typical potassium high-temperature heat pipe experiments. The effects of different permeability and capillary force characteristics of the wick structure on heat transfer and internal fluid distribution in the heat pipe were studied. Based on the current method, high-temperature heat pipes with different inclinations (0°, 90 °and 45°) were investigated. Additionally, non-uniform heating boundary conditions were added to the high-temperature heat pipe evaporator section to investigate its heat transfer performance under real reactor axial power input. This investigation lays the foundation for the design and analysis of the heat transfer characteristics of high-temperature heat pipes.

Numerical study on the operating characteristics of cryogenic loop heat pipes based on a one-dimensional heat leak model

One-dimensional numerical study for loop heat pipe with two-phase heat leak model

Simulation of Steady-State Operation of an Ejector-Assisted Loop Heat Pipe with a Flat Evaporator for Application in Electronic Cooling

Heat Transfer Limit Resulting from Heat Leak in a Cryogenic Loop Heat Pipe

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

Experimental Study on the Secondary Evaporator of a Cryogenic Loop Heat Pipe

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe

Research on Cryogenic Loop Heat Pipe Technology

Natural circulation performance in a new cryogenic heat transfer unit

Three-Dimensional Numerical Study on the Flow and Heat Transfer in Wick of Loop Heat Pipe

Numerical Investigation of High-Temperature Heat Pipes with Different Wick Structures under Non-Uniform Heating Boundary Conditions

Numerical Research on Heat Transfer Characteristics of Evaporation Segment of Separate Type Heat Pipe

Numerical Investigation on Pulsating Heat Pipes with Nitrogen or Hydrogen

Numerical investigation on cryogenic pulsating heat pipes with nitrogen

Performance Evaluation of Cryogenic Counter-Flow Heat Exchangers with Longitudinal Conduction, Heat In-Leak and Property Variations

Analysis of the Heat-Carrying Performance of Natural Circulation Loop Using Modified Relap5/Mod3.4

NUMERICAL INVESTIGATION OF THERMAL PERFORMANCE OF A CRYOGENIC OSCILLATING HEAT PIPE

A Review of the Numerical Models for Heat and Mass Transfer in High-Temperature Heat Pipes

Heat transfer with flow and evaporation in loop heat pipe’s wick at low or moderate heat fluxes

Mathematical Model and Numerical Simulation of Flow and Heat Transfer in LHP's Capillary Wick with Azimuthal Vapor Grooves

Numerical simulation on heat and mass transfer in gravity heat pipe