Abstract:Monodisperse polymer microspheres have been widely used in chromatography separation, coating additives,biological separation and targeted drug delivery due to their varying properties, such as the various morphology, well-defined composition, functional surface and biocompatibility. Recently, the preparation of monodisperse polymer microspheres and nanohydrogels has attracted great interests. Considering the shortage of the preparation method of the polymer nanohydrogels, we developed a new technique—reflux precipitation polymerization—for preparation of monodisperse and biocompatible polymer nanohydrogels. A typical procedure for the reflux precipitation polymerization is described as follows:Firstly, a suitable amount of monomers [MAA(methacrylic acid) and DVB(divinylbenzene)] and initiator [AIBN(2,2-azobisisobutyronitrile)] dissolved in acetonitrile was added into a round-bottom flask configured with a condenser.When the reaction temperature increased to the boiling point of the solution for about 5 min, the initially transparent reaction solution became milky white, and the reaction was continued for another 2 h. Then the resultant microspheres were separated and purified by repeating ultra-centrifugation(12000 r/min for 3 min)-decanting-redispersion(in ethanol with ultrasonic bathing) for three times. The morphology and particle size distribution of PMAA nanohydrogels were characterized by scanning electron microscope(SEM) and dynamic light scattering(DLS). Compared to the traditional precipitation polymerization and distillation-precipitation polymerization, this new method has many merits, such as high efficiency, good repeatability and easy operation, which can be used to high efficient preparation of polymer nanohydrogels and the related composite microspheres. Through testing the reaction conditions, such as reaction time, solid content, cross-linker content and solvent mixture, we successfully prepared the monodisperse PMAA nanohydrogels, and obtained the fundamental rule for the morphology control. We found that the diameter of PMAA nanohydrogels became larger and larger as the reaction time extended or the solid content and/or the ratio of good solvent of polymer increased. The particle size distribution of the PMAA nanohydrogels became poor if the solid content or the cross-linker content was beyond a certain threshold. These nanohydrogels and the related composite microspheres prepared by this new technique will be widely used in the biomedical fields.

Preparation of Poly(vinyl Alcohol) Microspheres Based on Droplet Microfluidic Technology

Microfluidic Rapid Fabrication of Tunable Polyvinyl Alcohol Microspheres for Adsorption Applications

Preparation and application of cross-linked PVA microspheres with narrow particle size distribution by suspension polymerization using uniform porous tube

Controllable Fabrication of Monodisperse Poly(vinyl alcohol) Microspheres with Droplet Microfluidics for Embolization

Preparation of Poly (L-Lactic Acid) Microspheres by Droplet-Freezing Process

Preparation of Poly (L-Lactic Acid) Microsphere

Preparation of polyvinyl alcohol microparticles

A modified microfluidic chip for fabrication of paclitaxel-loaded poly(l-lactic acid) microspheres

Construction of Marigold-like Poly(vinyl alcohol) Microspheres for Catalytic Microreactors

Novel synthesis of PVA/GA hydrogel microspheres based on microfluidic technology

Reflux Precipitation Polymerization: A New Technology for Preparation of Monodisperse Polymer Nanohydrogels

Preparation of uniform microcapsules with silicone oil as continuous phase in a micro-dispersion process.

Highly Crosslinked Poly(ethyleneglycol Dimethacrylate)-Based Microspheres Via Solvothermal Precipitation Polymerization in Alcohol–water System

Preparation of Poly (vinyl acetate)Cross-Linked Microspheres with Controllable Size and High Specific Surface Area

[Preparation and Characterization of Cross-Linked Polyvinyl Alcohol Microspheres As a Novel Precoating Reagent in Dynamic Membrane].

Preparation of PLLA/HA composite microspheres

Preparation Of Monodisperse Biodegradable Polylactic Acid Microspheres Using A Simple Microfluidic Approach

PREPARATION OF MONODESPERSE BIOPOLYMER MICROBEADS USING A NEW AND SIMPLE METHOD

Preparation of Poly (MMA-S-DVB) Microspheres by Suspension Polymerization Method

Preparation of Porous and Hollow Microspheres by Suspension Polymerization

Controllable Preparation of Polyacrylamide Hydrogel Microspheres in A Coaxial Microfluidic Device