Abstract:Quantum dot sensitized solar cells (QDSSCs) are attractive photovoltaic devices due to their simplicity and low material requirements. However, efforts to realize high efficiencies in QDSSCs have often been offset by complicated processes and expensive or toxic materials, significantly limiting their useful application. In this work, we have realized for the first time, high performance PbS QDSSCs based on TiO2 nanotube arrays (NTAs) via an in situ chemical deposition method controlled by a low electric field. An efficiency, η, of ~3.41% under full sun illumination has been achieved, which is 133.6% higher than the best result previously reported for a simple system without doping or co-sensitizing, and comparable to systems with additional chemicals. Furthermore, a high open-circuit voltage (0.64 V), short-circuit current (8.48 mA cm(-2)) and fill factor (0.63) have been achieved. A great increase in the quantity of the loaded quantum dots (QDs) in the NTAs was obtained from the in situ electric field assisted chemical bath deposition (EACBD) process, which was the most significant contributing factor with respect to the high JSC. The high VOC and FF have been attributed to a much shorter electron path, less structural and electronic defects, and lower recombination in the ordered TiO2 NTAs produced by oscillating anodic voltage. Besides, the optimal film thickness (~4 μm) based on the NTAs was much thinner than that of the control cell based on nanoporous film (~30.0 μm). This investigation can hopefully offer an effective way of realizing high performance QDSSCs and QD growth/installation in other nanostructures as well.

Flexible Fiber-Shaped Liquid/Quasi-Solid-State Quantum Dot-Sensitized Solar Cells Based On Different Metal Sulfide Counter Electrodes

Translucent TiO2 Nanotube Film for Quantum Dots Sensitized Solar Cells

Cuprous Sulfide On Ni Foam As A Counter Electrode For Flexible Quantum Dot Sensitized Solar Cells

Flexible Quantum Dot-Sensitized Solar Cells with Improved Efficiencies Based on Woven Titanium Wires

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

Multiworking Electrode Flexible Fiber-Type Quantum Dot-Sensitized Solar Cells

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Titanium Mesh Based Fully Flexible Highly Efficient Quantum Dots Sensitized Solar Cells

FeS2-sensitized ZnO/ZnS Nanorod Arrays for the Photoanodes of Quantum-Dot-sensitized Solar Cells

CdSe Quantum Dots Sensitized Mesoporous TiO2Solar Cells with CuSCN As Solid-State Electrolyte

Sodium Carboxymethyl Starch-Based Highly Conductive Gel Electrolyte for Quasi-Solid-state Quantum Dot-Sensitized Solar Cells

Efficient Flexible Counter Electrode Based on Modified Graphite Paper and in Situ Grown Copper Sulfide for Quantum Dot Sensitized Solar Cells

Facile one-step fabrication of CdS0.12Se0.88 quantum dots with a ZnSe/ZnS-passivation layer for highly efficient quantum dot sensitized solar cells

SnS-quantum Dot Solar Cells Using Novel TiC Counter Electrode and Organic Redox Couples.

Quasi-solid-state quantum dot sensitized solar cells with power conversion efficiency over 9% and high stability

Rational Design and Fabrication of Skeletal Cu 7 S 4 Nanocages for Efficient Counter Electrode in Quantum Dot-Sensitized Solar Cells

Preparation and Optimization of Flexible Quantum Dot Paste Based Photoanodes and Carbon Based Counter Electrodes

A Novel Polysulfide Hydrogel Electrolyte Based on Low Molecular Mass Organogelator for Quasi-Solid-state Quantum Dot-Sensitized Solar Cells

Quantum dot sensitized solar cells with efficiency up to 8.7% based on heavily copper-deficient copper selenide counter electrode

High Performance PbS Quantum Dot Sensitized Solar Cells Via Electric Field Assisted in Situ Chemical Deposition on Modulated TiO2 Nanotube Arrays.

Highly Efficient Solid-State Solar Cells Based on Composite CdS-ZnS Quantum Dots