Abstract:The implementation of sustainable manufacturing techniques to make machining operations more eco-friendly is a demanding issue that has gained attention from academic and industrial sectors. In some machining operations, a large quantity of machining fluids is wasted to make machining easier, especially during the machining of difficult-to-machine materials such as stainless steel. In such circumstances, many researchers are investigating eco-friendly techniques. Therefore, in this study, effects of minimum quantity lubrication (MQL) with MoS2-enhanced vegetable-oil-based cutting fluid on the drilling characteristics of AISI 321 stainless steel are investigated. The main aim of this study is to analyse the machining performance of various coolant–lubricant strategies, namely dry, flood, pure MQL, and three nanofluid MQL (NFMQL) with regard to thrust force and torque, surface roughness, friction coefficient, chip morphology and tool wear mechanism in drilling of stainless steel (AISI 321). Research findings indicated that NFMQL drilling conditions have given excellent drilling performance by improving drilling characteristics than pure MQL, dry and flood drilling. Among the NFMQL drilling conditions, 1.5 wt.% nano-MoS2 in sunflower oil-based MQL condition provided better cooling–lubrication effect and improved the drilling characteristics followed by 1.0 wt.% and 0.5 wt.% nano-MoS2 in sunflower oil-based MQL conditions. The 1.5 wt.% nano-MoS2 in sunflower oil-based MQL drilling had resulted in 43.2%, 68.9%, 56.8% and 41.6% reduced values of thrust force, torque, surface roughness and COF, respectively, at the 30th hole in comparison with flood drilling. Moreover, noticeable improvement in the chip morphology and tool wear rate has been achieved while drilling under NFMQL environments. The better drilling performance of nanofluid MQL may be attributed to the fact that nanoparticles (MoS2) in sunflower oil offer excellent cooling–lubrication features and provide strength to the oil film at the tool–workpiece interface. In addition, nano-MoS2 particles have high surface activity and are easily adsorbed onto the contacting surfaces, thereby maintaining the lubrication effect.

Experimental Investigation on the Compatibility of Nanoparticles with Vegetable Oils for Nanofluid Minimum Quantity Lubrication Machining

Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials

Nanofluids Minimal Quantity Lubrication Machining: from Mechanisms to Application

Performance evaluation of nanofluid-based minimum quantity lubrication grinding of Ni-Cr alloy under the influence of CuO nanoparticles

Machinability Assessment of Hybrid Nano Cutting Oil for Minimum Quantity Lubrication (MQL) in Hard Turning of 90CrSi Steel

Tribological Performance of Different Concentrations of Al2O3 Nanofluids on Minimum Quantity Lubrication Milling

Vegetable Oil-Based Nanofluid Minimum Quantity Lubrication Turning: Academic Review and Perspectives

Optimization of Al2O3 nanoparticle concentration and cutting parameters in hard milling under nanofluid MQL environment

Performance of Liquid Lubricants Using Nano-Additvies in Minimum Quantity Lubrication in Machining Process

Assessing the lubrication performance of various vegetable oil-based nano-cutting fluids via eco-friendly MQL technique in drilling of AISI 321 stainless steel

Experimental Study of Lubricating Property at Grinding Wheel/Workpiece Interface Under NMQL Grinding

Study on High-Speed Machining of 2219 Aluminum Utilizing Nanoparticle-Enhanced Minimum Quantity Lubrication (MQL) Technique

A Novel Approach of Applying Copper Nanoparticles in Minimum Quantity Lubrication for Milling of Ti-6Al-4V

Tribology and machinability performance of hybrid Al2O3 -MWCNTs nanofluids-assisted MQL for milling Ti-6Al-4 V

Grindability Evaluation of Ultrasonic Assisted Grinding of Silicon Nitride Ceramic Using Minimum Quantity Lubrication Based SiO2 Nanofluid

Effects of the physicochemical properties of different nanoparticles on lubrication performance and experimental evaluation in the NMQL milling of Ti–6Al–4V

Nanofluids application in machining: a comprehensive review

State-of-the-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL)

Specific Energy and Surface Roughness of Minimum Quantity Lubrication Grinding Ni-based Alloy with Mixed Vegetable Oil-Based Nanofluids

Tribological characteristics and drilling performance of nano-MoS2-enhanced vegetable oil-based cutting fluid using eco-friendly MQL technique in drilling of AISI 321 stainless steel

Experimental investigation to study the effect of synthesized and characterized monotype and hybrid nanofluids in minimum quantity lubrication assisted turning of bearing steel