Abstract:Bi3+ doped Ti/Sb-SnO2/PbO2 electrode materials were fabricated by electrodeposition to improve their electrochemical performance in zinc electrowinning. The surface morphology, chemical composition, and hydrophilicity of the as-prepared electrodes were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and contact angle. An electrochemical measurement and an accelerated lifetime experiment were also conducted to investigate the electrocatalytic performance and stability of the electrodes. The results show that the Bi3+ modification electrode has an important effect on the coating morphology, the crystal structure, the surface hydrophilicity, the electrocatalytic activity, and the stability. The electrode prepared from the solution containing 2 mmol·L−1 Bi(NO3)3 (marked as the Ti/Sb-SnO2/2Bi-PbO2 electrode) exhibits the best hydrophilicity performance (θ = 21.6°) and the longest service life (1196 h). During the electrochemical characterization analysis, the Ti/Sb-SnO2/2Bi-PbO2 electrode showed the highest oxygen evolution activity, which can be attributed to it having the highest electroactive surface (qT* = 21.20 C·cm−2) and the best charge-transfer efficiency. The DFT calculation demonstrated that the doping of Bi3+ leads to a decrease in the OER reaction barrier and an increase in the DOS of the electrode, which further enhances the catalytic activity and the conductivity of the electrode. Moreover, the simulated zinc electrowinning experiment demonstrated that the Ti/Sb-SnO2/2Bi-PbO2 electrode consumes less energy than other electrodes. Therefore, it is expected that the Bi3+ modified electrode will become a very promising electrode material for zinc electrowinning in the future.

A Promising Ti/SnO2 Anodes Modified by Nb/Sb Co-Doping

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Effect of SnO2 addition on the service life and electrochemical properties of Ti/IrO2+Ta2O5 anodes in phenolsulphonic acid solution

New hierarchical Ti/SnO 2 -PbO 2 /CNT electrode: Enhanced electrochemical properties and improved electrochemical oxidation towards various real wastewaters

Effects of Nickel Doping on the Preferred Orientation and Oxidation Potential of Ti/Sb-SnO2 Anodes Prepared by Spray Pyrolysis

Enhanced performance of an Al-doped SnO2 anode for the electrocatalytic oxidation of organic pollutants in water

Preparation of a novel Ni/Sb co-doped Ti/SnO2 electrode with carbon nanotubes as growth template by electrodeposition in a deep eutectic solvent

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Niobium-Doped Titanosilicate Sitinakite Anode with Low Working Potential and High Rate for Sodium-Ion Batteries

Ultra-High Oxidation Potential of Ti/Cu-Sno2 Anodes Fabricated by Spray Pyrolysis for Wastewater Treatment

Electrochemical Behavior of Novel Ti/Irox-Sb2o5-Sno2 Anodes

SnO2 nanoparticles composited with biomass N-doped carbon microspheres as low cost, environmentally friendly and high-performance anode material for sodium-ion and lithium-ion batteries

Facile sealing treatment with stannous citrate complex to enhance performance of electrodeposited Ti/SnO 2 -Sb electrode.

Fast, One‐Step In Situ Synthesis of a Hierarchical Sn4+‐Doped TiNb2O7 Nanosphere as a High‐Performance Anode Material

Influence of Bi3+ Doping on Electrochemical Properties of Ti/Sb-SnO2/PbO2 Electrode for Zinc Electrowinning

Ni2+-Dopedna2ti6o13 Nanotubes to Enhance the Electrochemical Performance of Sodium Ion Batteries

Active Ti/SnO2 Anodes for Pollutants Oxidation Prepared Using Chemical Vapor Deposition

Confinement of sulfur-doped NiO nanoparticles into N-doped carbon nanotube/nanofiber-coupled hierarchical branched superstructures: Electronic modulation by anion doping boosts oxygen evolution electrocatalysis

High Corrosion Resistance of a Ti-Based Anode with Sn/Ti/Nb Ternary Metal Oxide Interlayers

Enhanced Electrochemical Performance of a Tin−antimony Alloy/N‐Doped Carbon Nanocomposite as a Sodium‐Ion Battery Anode

Electrospun Bi-doped TiO2/C nanofibers as active materials for high-capacity and long-life-stability sodium-ion anodes