Abstract:Combining the electromagnetic levitation (EML) method with materials processing techniques (pressure die-casting and copper mold solidification), bulk Ti44Al48Nb8 alloy samples with different shapes were prepared, and their microstructure evolution, tensile properties and deformation behavior were systematically investigated. Assisted with a double aberration corrected transmission electron microscope (TEM) and molecular dynamics (MD) simulation, three types of intersecting nanotwins were observed and the formation mechanism of step-like and intersecting nanotwins under both tensile loading and at highly undercooled state were discussed. For the 35 g cone-shaped Ti44Al48Nb8 sample by EML, the microstructure consists of lamellar alpha 2Ti3Al+gamma-TiAl matrix, Nb-rich and Al-rich region, showing a typical peritectic morphology. The average grain size has been significantly reduced after levitation die-casting and copper mold casting, due to the relatively high cooling rate and external stress. The rapidly solidified microstructure of a 0.6 g sample undercooled at 61 K has the similar microstructure with large samples. With the increase of bulk undercooling at 300 K, elemental segregation has been effectively inhibited and the intersecting nanotwins were formed, which shows a unique hierarchical structure. The samples processed by copper-mold casting have good tensile properties, which can be attributed to the refined microstructure, the generation of dislocation and stacking faults, and the formation of intersecting nanotwins. Based on the results of MD simulation and atomic-scale quasi-in-situ TEM observation, the analogous dissociation of dislocation dominated by pole mechanism occurs, resulting in the formation of 1/6 < 112 > Shockley partial dislocation, 1/ 6 < 110 > stair-rod dislocation and 1/3 < 111 > Frank partial dislocation. When samples were highly undercooled, the generated internal stress can facilitate twinning at a much lower stress level, which can be beneficial for the formation of nanotwins at undercooled state.

Crystallography Study on the Internal Twinning of Ti–Nb‐Based Shape Memory Alloys

Enhanced Tensile Properties and Intersecting Nanotwins Formation Mechanism of Ti44Al48Nb8 Alloy Via Electromagnetic Levitation Processing

Atomic-scale Structural Characterization and Twin Formation Mechanisms of Μ Phase Within Refractory NbNi Alloy

On the Mechanism of {332} Twinning in Metastable Β Titanium Alloys

High resolution electron microscopy studies on the interface structure of deformed stress induced martensite variants in a Ti–Ni–Nb shape memory alloy

Twinning behavior of orthorhombic-α" martensite in a Ti-7.5Mo alloy

{332}&Lt;113> Twinning Transfer Behavior and Its Effect on the Twin Shape in a Beta-Type Ti-23.1Nb-2.0Zr-1.0O Alloy

Twinning-induced plasticity (TWIP) effect in multi-phase metastable beta Zr-Nb alloys

Study on the Deformation Mechanism of the Martensitic Ti–16Nb High Temperature Shape Memory Alloy

Stress-induced Crystallographic and Microstructural Evolution for Hierarchically Twinned Martensite in Single- and Dual-Phase Ni-Mn-Ga Alloys

Twin inheritance effect of thermomechanical-processing NiTiCu shape memory alloy

Deformation Twinning of Molecular Dynamics Simulation in a Ternary Titanium Alloy under Nanoindentation

Study on {332}〈113〉 deformtion twinning of Ti-25 Nb-25 Ta alloy during tensile deformation by EBSD

Revealing the Interface Structure of {111} Type I Twin in Ti-Ni-Hf Shape Memory Alloy Composite

Novel deformation twinning system in a cold rolled high-strength metastable- Ti-5Al-5V-5Mo-3Cr-0.5Fe alloy

A TEM Study on Thermally-Induced Martensitic Transformation in Ti44Ni47Nb9 Alloy

Deformation induced self-accommodation morphology transition from triangular to nano-twinned martensite in Ti-Nb-Zr shape memory alloys

The Role of (001) Microtwinning Played During the Deformation of Stress Induced Martensite in Ti-Ni-Nb Shape Memory Alloy

An alternative formation mechanism of {332}BCC twinning in metastable body-centered-cubic high entropy alloy

The Structure and Associated Formation Mechanism of Deformation Twins in Cu-Nb Alloy

Electron microscopy study of the crystallography of martensitic transformations in a Ti-Ni-Hf high temperature shape memory alloy