Abstract:Abstract Several high-temperature body-centered cubic (bcc) structural materials such as Nb-, Zr- and Ti-based alloys undergo phase separation, which is a second-order phase transformation, whereby the host lattice decomposes into distinct bcc domains with different compositions. Using atomistic simulations, we studied the high-strain-rate response of bcc-forming Nb– x Zr ( x = 0, 25, 50 at.%) alloys. To induce phase separation in our starter alloy, we first employed hybrid Monte Carlo/Molecular Dynamics simulations in single crystals of Nb– x Zr at 1000 K. Subsequently, these crystals were deformed along different crystallographic orientations ( $$\langle 001\rangle$$ ⟨ 001 ⟩ , $$\langle 110\rangle$$ ⟨ 110 ⟩ and $$\langle 111\rangle$$ ⟨ 111 ⟩ ) at a strain rate of $$10^{+8} s^{-1}$$ 10 + 8 s - 1 , to investigate orientation dependent mechanical response. The phase-separated Nb– x Zr microstructures exhibited distinct bcc domains enriched in either Zr or Nb. Notably, Nb-50 at.%Zr contained coarser Zr-domains compared to Nb-25 at.%Zr. The Zr-rich domains acted as “soft” inclusions, resulting in reduced peak strengths in the following order: pure Nb (Nb-0 at.%Zr) > Nb-25 at.%Zr > Nb-50 at.%Zr. This implies that phase separation causes softening in Nb– x Zr. We also discovered two deformation pathways that depended on the crystallographic orientation: (i) For deformation along $$\langle 110\rangle$$ ⟨ 110 ⟩ and $$\langle 111\rangle$$ ⟨ 111 ⟩ directions: Elastic deformation was followed by dislocation plasticity on $$\{110\}\langle 111\rangle$$ { 110 } ⟨ 111 ⟩ slip systems; and (ii) For deformation along $$\langle 001\rangle$$ ⟨ 001 ⟩ direction: Elastic deformation was followed by the formation of a volumetric fcc structure, twinning on {112} $$\langle 111\rangle$$ ⟨ 111 ⟩ system, and the formation fcc-phase at the twin/matrix interfacial regions. This was ultimately accompanied by dislocation plasticity on $$\{110\}\langle 111\rangle$$ { 110 } ⟨ 111 ⟩ slip system. The bcc $$\rightarrow$$ → fcc displacive transformation facilitated {112} $$\langle 111\rangle$$ ⟨ 111 ⟩ twinning when Nb– x Zr was deformed along $$\langle 001\rangle$$ ⟨ 001 ⟩ . Our investigation shows that softening of bcc alloys can result from a coupling of mechanisms involving local solute segregation, displacive phase transformation and twinning occurring across multiple slip planes.

Twinning-induced plasticity (TWIP) effect in multi-phase metastable beta Zr-Nb alloys

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

TiZrHfNb refractory high-entropy alloys with twinning-induced plasticity

An Investigation of Slip and Twinning Behavior of a Zirconium Alloy During Plastic Deformation Based on In-Situ SEM-EBSD

Transformation- and twinning-induced plasticity in phase-separated bcc Nb-Zr alloys: an atomistic study

Phase transformation induced transitional twin boundary in body-centered cubic metals

Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys

Atomistic Simulation for Deforming Complex Alloys with Application Toward TWIP Steel and Associated Physical Insights

Intrinsic Coupling Between Twinning Plasticity and Transformation Plasticity in Metastable Β Ti-alloys: A Symmetry and Pathway Analysis

Novel deformation twinning system in a cold rolled high-strength metastable- Ti-5Al-5V-5Mo-3Cr-0.5Fe alloy

Dislocation Plasticity Reigns in a Traditional Twinning-Induced Plasticity Steel by in Situ Observation

Deformation Induced Hierarchical Twinning Coupled with Omega Transformation in a Metastable β-Ti Alloy

Transformation and twinning induced plasticity in metastable Ti-Mo alloys under high strain rate deformation

Study on the Twinning/De-twining Behavior of Different Types of Twin–Twin Interaction via Experiments and Molecular Dynamics Simulation

TWIP-assisted Zr Alloys for Medical Applications: Design Strategy, Mechanical Properties and First Biocompatibility Assessment

Finite strain crystal plasticity-phase field modeling of twin, dislocation, and grain boundary interaction in hexagonal materials

Atomic-scale observation of nucleation- and growth-controlled deformation twinning in body-centered cubic nanocrystals

Effect of twinning on the deformation behavior of an extruded Mg-Zn-Zr alloy during hot compression testing

The mechanism of twin thickening and the elastic strain state of TWIP steel nanotwins

Cross-slip of extended dislocations and secondary deformation twinning in a high-Mn TWIP steel