Abstract:An alternative approach for the synthesis of styrene butadiene rubber (SBR) copolymer latexes was explored in order to obtain low gel fractions and high solid contents. The ultra-turrax-assisted miniemulsion stabilized by in situ surfactant generation was adopted as the main strategy since this technique can inhibit the eventual presence of secondary nucleation producing polybutadiene particles and also control the cross-linking degree. Styrene monomer was first miniemulsified using an ultra-turrax and in situ generated surfactant using either hexadecane (HD) or octadecyl acrylate (ODA) as the hydrophobe. Dynamic light scattering (DLS) measurements of droplet size indicated faster stabilization and the production of smaller droplet diameters ca. 190 nm (PdI = 0.08) when employing in situ generated potassium oleate (K-Oleate) in comparison to SDS-based miniemulsions. High butadiene-level SBR latexes with ca. 50% solids content, a glass transition temperature (Tg) of −52 °C, and a butadiene to styrene weight ratio of 75:25, were then obtained using the miniemulsion droplets as seeds. Turbiscan and DLS measurements revealed a very stable resulting latex with SBR particle diameter of ca. 220 nm and a low polydispersity index (PdI). Secondary nucleation was prevented as indicated by the low Np/Nd value. Cryo-TEM images showed a narrow distribution of particle size as well as the absence of agglomeration. The gel content was below 10% when tert-dodecyl mercaptan (t-DM) was used as chain transfer agent (CTA).

In Situ Removal of HBr Via Microdroplets for High Selectivity Bromobutyl Rubber Synthesis in a Microreaction System

Synthesizing Bromobutyl Rubber by A Microreactor System

Calcium Stearate as an Acid Scavenger for Synthesizing High Concentrations of Bromobutyl Rubber in a Microreactor System

New Technology for Synthesis of M-Bromophenol with Tubular Reactor

Microreaction continuous synthesis and application of bromine chloride

Photocatalytic Oxidative Bromination of 2,6-Dichlorotoluene to 2,6-Dichlorobenzyl Bromide in a Microchannel Reactor

Styrene-Butadiene Rubber by Miniemulsion Polymerization Using In Situ Generated Surfactant

Reverse Atom-Transfer Radical Polymerization at Room Temperature

Analysis and pathway exploration of high-boiling residues for methyl-chlorosilane-monomers production

Reactive Separation of Β-Bromoethylbenzene from Α-Β-bromoethylbenzene Mixtures: a Zn2+-mediated Radical Polymerization Mechanism.

Structure and Properties of Silicone Rubber/Styrene–Butadiene Rubber Blends with in Situ Interface Coupling by Thiol-ene Click Reaction

Solvent Swelling-Induced Halogenation of Butyl Rubber Using Polychlorinated N-Alkanes: Structure and Properties

Hydrobromination of hydroxyl-terminated polybutadiene (HTPB) resin under optimal conditions with aqueous hydrobromic acid using response surface methodology (RSM)

Synthesis of Branched Poly(butyl acrylate) Using the Strathclyde Method in Continuous-Flow Microreactors

Capturing Approach for the Toxic Bromides Generated in Low-Temperature Pyrolysis of Brominated Resin

Graft Copolymerization of Methyl Methacrylate from Brominated Poly(isobutylene-Co-isoprene) Via Atom Transfer Radical Polymerization

A Novel Interface Agent for Preparation of High Gas Barrier Organic Montmorillonite/Brominated Butyl Rubber Nanocomposites

On-the-fly H2 Degassing: Towards Selective Borohydride Reduction of Α, Β-Unsaturated Esters to Allylic Alcohols in Continuous Microflow

Low-Temperature Mechano-Chemical Rubber Reclamation Using Terpinene as a Swelling Agent to Enhance Bond-Breaking Selectivity

Continuous-flow, gas phase synthesis of 1-chlorobutane (1-bromobutane) from 1-butanol and aqueous HCl (HBr) over silica-supported quaternary phosphonium salt

Generation of Poly(Isobutene-Co-Isoprene) in A Microflow Device