Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Hydrobromination of hydroxyl-terminated polybutadiene (HTPB) resin under optimal conditions with aqueous hydrobromic acid using response surface methodology (RSM)

Preparation of Hydroxyl-Terminated Polybutadiene with High Cis-1,4 Content

Cleavable Polybutadiene Rubber: A Versatile Precursor to Hydroxyl-Terminated or Multi-Hydroxyl Polybutadiene and Polyethylene

Facile Synthesis of Novel HTPBs and EHTPBs with High Cis-1,4 Content and Extremely Low Glass Transition Temperature

Synthesis, Chemical Modifications and Applications of Hydroxyl-Terminated Polybutadiene

Synthesis of HTPB with High cis-1,4 Content from PBD Original Solution

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Synthesis of Hydroxyl-Terminated Polybutadiene Possessing High Content of 1,4-Units Via Anionic Polymerization

Facile Access To Carboxyl-Terminated Polybutadiene And Polyethylene From Cis-Polybutadiene Rubber

Synthesis and Characterization of Linear-shaped and 3-Arm Star-shaped Hydroxyl-terminated Polybutadiene via Living Anionic Polymerization

The Impact of Different Catalysts on Heterogeneous Hydrogenation of Hydroxyl‐Terminated Polybutadiene

Evaluation of Strongly Acidic Ion-Exchange Catalysts and the Desulfonation Study in the Isobutylene Dimerization Reaction

Kinetic study of HTPB (Hydroxyl Terminated Polybutadiene) Synthesis Using Infrared Spectroscopy

Synthesis and characterization of nitro-functionalized hydroxyl-terminated polybutadiene using N-iodosuccinimide

Synthesis and characterization of new intrinsic self-healing hydroxyl-terminated polybutadiene (HTPB) functionalized with 2-ureido-4-pyrimidinone

Extraction Condition Optimizing Of Poly (3-Hydroxybutyric Acid) From Microorganism Using Response Surface Methodology

Surface Wetting Behaviors of Hydroxyl-Terminated Polybutadiene: Molecular Mechanism and Modulation

Effect of Hydrogen Gas on Synthesis of 1,2-Polybutadiene with Molybdenum Catalyst System

Synthesis of HHTPB by partial hydrogenation of HTPB using copper chromite as a catalyst

110Th Anniversary: the Epoxidation of Polybutadiene Via Reaction-Controlled Phase-Transfer Catalysis