Abstract:As the fatigue problem of orthotropic steel plates becomes increasingly severe in medium- and long-span bridges, structural health monitoring of the plates that could identify cracks timely is in great demand. Considering that orthotropic steel plates are of multiple structural elements and complex geometries, it is challenging to locate the cracks accurately. To this end, a novel acoustic emission (AE) source location method based on empirical wavelet transform and long short-term memory neural network was developed for crack monitoring of orthotropic steel plates. Empirical wavelet transform adaptively decomposed prominent components contained in the raw AE signal, of which the one with distinct dispersive modes was selected as the characteristic component to more precisely determine the arrival time through Akiake information criteria. The long short-term memory model established a more exact relationship between the arrival time differences of AE signals at multiple sensors and the source coordinates. With the help of empirical wavelet transform and long short-term memory model, it significantly eliminated the influence of dispersion, reflection, scattering, multiple propagation paths and noise, and thus guaranteed higher crack location accuracy. Through field experiment on a long-span suspension bridge, where cracks were simulated by artificial AE sources, a comprehensive comparison was carried out among traditional time-of-arrival method, delta-T mapping method, improved delta-T mapping method based on Akiake information criteria and Gaussian process, a counterpart of the proposed method based on empirical wavelet transform and Gaussian process, as well as the proposed method based on empirical wavelet transform and long short-term memory neural network. The location errors and their variations of the proposed method were found far less than those of the other existing methods. The location accuracy could be further improved by increasing the grid resolution of pencil lead break pre-tests. The results demonstrated the feasibility and superiority of the proposed crack location method for field applications on large-scale complex structures like orthotropic steel plates.

An Improved Recovery Method of Rail Crack Signal Based on Least-Square Deconvolution Algorithm with Sectional Regulatory Factors.

Ultrasonic Guided Wave-Based Switch Rail Monitoring Using Independent Component Analysis

Application of Compressed Sensing in the Guided Wave Structural Health Monitoring of Switch Rails

Rail Crack Detection Using Optimal Local Mean Decomposition and Cepstral Information Coefficient Based on Electromagnetic Acoustic Emission Technology

Application of eddy current testing in the quantitative evaluation of the rail cracks

Quantitative Investigation of Acoustic Emission Waveform Parameters from Crack Opening in a Rail Section Using Clustering Algorithms and Advanced Signal Processing

Efficient Data Compression of Acoustic Signals in Rail Using Sparse Decomposition and Kurtosis-Guided Resampling

Simulation and Experimental Research of V-Crack Testing of Rail Surfaces Based on Laser Ultrasound

EMAE-Based Rail Structural Health Monitoring Using Double-Layer Signal Processing and Spectrum Information Entropy

Study on acoustic emission properties and crack growth rate identification of rail steels under different fatigue loading conditions

Transverse Crack Detection of Rail Base Considering Wedge-Like Structure and Using a Bulk-Wave Electromagnetic Acoustic Transducer

Eddy Current Sensor Array for Electromagnetic Sensing and Crack Reconstruction with High Lift-Off in Railway Tracks

Rail fracture monitoring based on ultrasonic-guided wave technology with multivariate coded excitation

Towards Advancing Real-Time Railroad Inspection Using a Directional Eddy Current Probe

Analysis on asymmetrical RCF cracks characterisation using an ACFM sensor and the influence of the rail head profile

A novel acoustic emission source location method for crack monitoring of orthotropic steel plates

Acoustic emission wave classification for rail crack monitoring based on synchrosqueezed wavelet transform and multi-branch convolutional neural network

Research on the rail waist defect testing with laser-EMAT ultrasonic and signal processing

A Proposed Algorithm Based on Variance to Effectively Estimate Crack Source Localization in Solids

Evaluation of the Transverse Crack Depth of Rail Bottoms Based on the Ultrasonic Guided Waves of Piezoelectric Sensor Arrays

Experimental Evaluation of Crack Evolution in Rails Using a Phased Array