Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

Adaptive Intelligent Detection Based on 6-DOF Manipulator

Design Of Trajectory Tracking Control For Adaptive Intelligent Detection Based On 6-Dof Manipulator

Trajectory Tracking Control of a 6-DOF Hydraulic Parallel Robot Manipulator with Uncertain Load Disturbances

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Research on the Trajectory Tracking Control of a 6-DOF Manipulator Based on Fully-Actuated System Models

Jerk-bounded and -Continuous Trajectory Planning for a 6-DOF Serial Robot Manipulator with Revolute Joints

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Adaptive controller-observer design for 6-DOF parallel manipulators

Tracking Control of Robotic Manipulators with Uncertain Kinematics and Dynamics

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Robust Tracking Control of 6-DOF Parallel Electrical Manipulator in Joint-Task Space with Fast Friction Estimation

Model Identification and Adaptive Control Design for A 6 Dofs Manipulator

Robust trajectory tracking controller for 5 degree of freedom robotic manipulator

Adaptive visual tracking control of uncertain rigid-link electrically driven robotic manipulators with an uncalibrated fixed camera

Computed force and velocity control for spatial multi-DOF electro-hydraulic parallel manipulator

Adaptive Dynamic Control for Manipulator Actuated Integrated Translation and Rotation Stabilization of Spacecraft

Research on Manipulator Trajectory Tracking Based on Adaptive Fuzzy Sliding Mode Control

Adaptive Jacobian Synchronized Tracking Control for Multiple Robotic Manipulators

Robotic Manipulator Control Based on Disturbance Observer: A High-Order Fully Actuated System Approach

Force-Motion Control For A Six Degree-Of-Freedom Robotic Manipulator